Waldrich line boring bar lathe

HB 4500 x 100 NC x 6000

MACH-id 539

MERK Waldrich Siegen

TYPE HB 4500 x 100 NC x 6000

YEAR 1977

SPECIFICATIES

Draai Ø diameter over bed4500 mm

Draai lengte6000 mm

Make : Waldrich – Siegen - Germany

Type  : HB 4500 x 100 NC x 6000

Age   : 1977

No     : 16040

 

 Minimum turning Ø                   :    320

Maximum turning Ø        : 4.500

Max. travel X on bed      : 6.000

 Work piece load             : 100.000 KG

 

Boring bar bed width      : 1.900

2 bed way Bed length     : 9.000

Drive power                   : 75 kW

 

Speed 1 drive: 0,5 –   9 –  32 Rpm

Speed 2 drive: 1,6 – 30 – 104 Rpm

Torq on boring bar 7.000 kpm

 

Feed in X travel : 0,05 –     100 mm/min.

Rapid in X travel: 100   – 3.000 mm/min.

Travel boring bar on bed : 3.500 mm

Guiding Hydrostatic

 

Drive facing job feed: 0,05 – 50 mm/min.

Drive facing job rapid: 50 – 300 mm/min.

 

Boring bar Ø 450

Inside       Ø :     325

Length        : 13.900

Split able in 2 pieces

2 drives

To 1e drive = 4.900 to 2e drive from 1e = 3.000

 

Boring bar Ø 300

Inside       Ø :     205

 Length        : 12.400

Split able in 2 pieces

2 drives

To 1e drive = 4.400 to 2e drive from 1e = 2.500

 

Fixed Boring bar steady rest on X travel bed

Length                  :  660

4 x hydrostatic ring bearing

2 x ring support bar Ø 450 + Ø 300

Travel on lower bed : 3.700 mm

Travelling speed     : 1.000 mm/min.

 

Movable Boring bar steady rest II

 Length                  : 1.200

 4 x hydrostatic ring bearing

2 x ring support bar Ø 450 + Ø 300

 

Travel on lower bed : 3.700 mm

Travelling speed     : 1.000 mm/min.

 

Movable Boring bar steady rest III

Length                  :  660

2 x hydrostatic ring bearing

2 x ring support bar Ø 450 + Ø 300

Travel on lower bed : 1.000 mm

Travelling speed     : 1.000 mm/min.

 

2 Guide way Bed for steady rest II & III

Bed width             : 2.600

Length                  : 7.000

Thickness             :    400

 

Int. Boring bar heads for Ø 450 No.1

Tool holder 1         460 – 640

Tool holder 2        540 – 720

Tool holder 3        620 – 800

Stroke max.                      90

 

Int. Boring bar heads for Ø 450 No.2

Tool holder 1         780 – 1.020

Tool holder 2        860 – 1.100

Stroke max.                      120

 

Int. Boring bar heads for Ø 450 No.3

Tool holder 1         1.020 – 1.420

Tool holder 2        1.100 – 1.500

Stroke max.                        200

 Ext. Boring bar heads for Ø 450 No.4

Tool holder 1         1.450 – 1.850

 Tool holder 2        1.800 – 2.200

Stroke max.                        200

 

Ext. Boring bar heads for Ø 450 No.5

Tool holder 1         2.150 – 2.950


Tool holder 2        2.500 – 3.300

Stroke max.                         400

 

 

Int. Boring bar heads for Ø 300 No.1

Tool holder 1         310 – 430

Tool holder 2        390 – 510

Tool holder 3        470 - 590

Stroke max.                      60

 

Int. Boring bar heads for Ø 300 No.2

Tool holder 1         680 – 780

Tool holder 2        660 - 860

 Stroke max.                    100

 

Int. Boring bar heads for Ø 300 No.3

Tool holder 1         840  – 1.220

Tool holder 2        920 – 1.300

Stroke max.                       190

      Ext. Boring bar heads for Ø 300 No.4

Tool holder 1         1.250 – 1.650

Tool holder 2        1.600 – 2.000

 Stroke max.                        200

 

Many boring bar tool Quadratics

Rebuild to NCT in ca. 2000

Precision 0,001 mm over NC

Contact

PDF

Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Neem contact met ons op over deze machine
Bedankt voor je aanvraag
PROCESSING

One moment please....