Correa HVM travelling column milling machine

Correa HVM travelling column milling machine 
Hypałia Kunmíng
NICOLAS CORREA, sínce íts creation in 1947, is dedícated to the manufacturíng of Millíng Machínes, usíng ín contínuous evolution the most advanced technologies, permitting the construction of innovative and relíable miIIing solutíons. NICOLAS CORREA is quoted in the Madrid stock exchange sínce 1989, being the only Spanísh machíne tool buílder beíng present in the stock exchange and one of the leadíng European manufacturers of inedium to large míllíng solutions.
At present, the Group wíth hís headquarters at Burgos has four facílítíes producíng millíng machínes, two ín Burgos, one in ltziar Deba-Spain and one in Kunming China . Additionaly, the Group has three industrial subsídiaríes in Burgos, providing accesories ATC and heads : Hypatia, electrical subassemblies: GNC Electronica and fabrícated
steel structural components and guardíng systems: GNC Caldereria. All these companies produce, wíth a human team highly qualifíed and motivated, a large number of alternative milling-boring solutíons capable to satisfy the needs of the most exígent customers.
The combination of the Engíneering capacity of the two maín design sites at Burgos and ltziar, develop the leading edge technology in milling heads and machines to províde the most reliable, ínnovative and long lastíng milling solutions.
The international sales network is composed of a dense number of partners distríbuted over the territories, in a way to have always a contact in the area, served by present and agile persons ready to respond to the most demanding customers.
To provide a better service to the customers in all areas a technícal service is provided both with electrical and mechanical Engineers that can respond quíckly and effectívely to the customer maíntenance and repair needs.
correanayak

FLOOR TYPE MILLING MACHINE, T CONFIGURATION.
HIGH CAPACITY FOR ROUGHING AND FINISHING.
COLUMN MOVING IN Y AXIS.
The column moving system in the Cross axis Y axis ensures maximum precision.
Maximum power on all table surfaces.
Cross travel guideways not exposed, always covered.
Designed and calculated by FEM.

FLEXIBILITY:
CAC Automatic Head Change system.
ATC Automatic Tool Change system.
Several Automatic Milling Heads.
Up to 24000 indexing / 5 Axis continuous.
Integrated Rotary Tables, Rotary-Overhead Tables.

TECHNICAL CHARACTERISTICS HVM HVM-MG
Table Surface: Request for details.
Longitudinal X: mm.
Cross Y: mm.
Vertical Z: mm.
Spindle nose: ISO-50 / HSK-100.
Programmable speed range: Specific range not provided.
Maximum power: 28 - 46 kW.
Maximum torque: Not specified.
Rapid feed (X-Y-Z): 20-30 m/min.

Options:
Other CNC systems, Measurement and tool presetting touch probes, Automatic tool change, Chip removal equipment, Coolant equipment, Cleaning gun, Stationary floor plates, Rotary tables, Automatic tool changer, Two working places with double CNC and keyboard panel, MQL outer tool microlubrication system.

CAPACITY DRAWINGS
Fixed head support for guaranteed HIGH ACCURACY.

2-AXIS CONTINUOUS M1LLING HEAD
INTEGRATED ROTARY TABLE
MACHINE EQUIPPED WITH AUTOMATIC HEAD CHANGE SYSTEM
INTEGRATED ROTARY TABLE AND PENDULAR WORKING
3 WORKING AREAS, 3 CNC PANELS
correanayak
FLOOR TYPE TRAVELLING COLUMN
correanayak
TWO INTEGRATED ROTARY TABLES
AUTOMATIC PLATFORM
SPECIAL GUARDING UNDER REQUEST
correanayak
INTEGRAL GUARDING WITH AUTOMATIC DOORS
ROTARY TABLES WITH SEVERALS SIZES
DUPLEX SOLUTION REDUCES THE PROCESSING
TIME AND INCREASES THE PRODUCTIVITY.
correanayak
MACHINE EQUIPPED WITH AUTOMATIC
HEAD CHANGE SYSTEM
Uníversal Auto-indexíng
Dífťerentíal Head
lndexierbarer
Universalfräskopf
28/46 kW / 6000 гpm 28/46 kW / 4000 гpm
1375 Nm 1375 Nm
Orthogonal Auto-indexing
Dίfferentίal Head
Front Spindle
Horizontal-Spindel
Front Spindle
Horizontal
Reach-out Angle 660 127 
Míllíng Head
correanayak
D Andrea Head
2-Axís Contínuous
Míllíng Head
Adaptor for capto toolíng

Thanks to its positioning system by Hirth coupling rings, these heads offer much better repeatability and clamping force than conventional systems.
AUTOMATIC HEAD CHANGER CAC 11
LANZA TURNING HEAD
E5E
UT5-500/630/800 OAD
AL-600
FC
FD

AUTOMATIC HEAD CHANGE
The fully automated machining of complex parts is now possible, thanks to the automatic milling head changing option.
With this system, all the heads available in this catalogue can be mounted with precision.
OPTIONS 
Other CNC systems. A
Measurement and tool presetting touch probes. 
Automatic tool changer. 
Swarf management system.
Coolant equipment
Cleaning gun. 
Floor plates. 
Rotary tables. Automatic head changer. 
Two working areas with double CNC and two controllers.
Keyboard panel.
Oil-air Minimum Quantity Lubrication for external processing (MQL).
MQL outer tool microlubrication system.
Special Heads solutions adapted on request.
Special fixtures.
Different options of tool changers.
Automatic tool presetting.
Automatische Werkzeugvermessung.
Several sizes of tables available on request.
Verschiedene Tische und Tischgrößen auf Anfrage.

APPLICATIONS - EINSATZMÖGLICHKEITEN
Electric generator’s main shaft.
Outer diameter of a machine component.
Frame of a windmill.
Boogie for railway.
Pelton turbine – milling, turning.
Boring holes of a crane arm.
Upper half of a vacuum pump.
An excavator shovel.
4-pole electric generator shaft.
Duplex machining of an excavator arm.
Electric generator housing.
Mold-die for automotive.
Base ring for a large-size port crane.
Frame of windmill.
Coil of a large-size electric generator.

HVM-DUPLEX
VH-PLUS LANZA
PERFORMER-MG