Hebö RBV serie tube drilling machine

Hebö RBV serie tube drilling machine 

HEBÖ tube drilling machines

Hebő Maschinenfabrik GmbH, situated in GeműndenGrűsen, North of Hessen retrospect to over 40 years experience in the area of machinery engíneering and metal working. In 1968 Hans-Erich Bőh1 founded his blacksmith workshop, 1973 he developed his first artistic iron machíne, based on thís, the area machinery engineering was continuosly ímproved. Down to the present day improvements and díversífications at hebő have always set new standards for metalworkíng plants and metal formíng worldwíde.

The specífícations, dímensions and the components used in this catalogue represent the current status of our products. We reserve the ríght to change and develop our products. The performance values depend on the frequency inverter used and may deviate from the indicated values.
The content of this catalogue has been created with the greatest care. However the hebö Maschínenfabrík GmbH cannot be held liable for faulty indications and čheir consequences, neither assume any juridical responsibilitynor any liability.

The RBV12 tube drilling machine is our basic model for professíonal demands. With its help you can treat tubes, T-profiles, double upríghts and flał material fast, mulłi-purpose and precisely.
The RBV12 ís suitable for drilling, also diagonally up to 60° flow drillíng, core hole drilling and thread formíng of steel and stainless steel or other materials e.g. wood or copper. Due to íts two drilling heads you can work single- or double-sided. A slidíng of the drílls is prevented by precise guides.

With łhe RBV12 SV you wí11 get a half automatic drilling machine for economical production of sections and flat materíals, e.g. for the production of handrailing, shelves or for the furniture índustry.
1n contrast to łhe RBV12 the feedíng, swínging and the clamping works automatically. flfter clamping the workpiece manually, the complete treatment runs automatically controlled by predefíned programmes.
The machine is supplíed as basic equipment wiłh a diagnosís function for maintenance.

Properties.
- Ha1f automatíc work flow
- Calculatíon of saw cuts
- Díagnosis function for fast troubleshooting
- Tubes up to 3" (88, 9mm)
- 5quare tubes up to 80 x 80mm
- F1at material up to 80 x 10mm
- T-profile up to 70 x 70 x 8mm
- L-profile up to 40 x 40 x 4mm
- Double post up to 80 x 10 mm
- Pіpe length max. 4,5m

The RBV12 SVG ís a half automatic machine as the RBV12 SV. The difference to the RBV12 SV ís the graspíng function for handling of sections with 6m or 9m lengłh. Futhermore the RBV12 SVG has a 1ow space requirement.

Properties:
- Graspíng functíon for handlíng of 6m/9m pipes
- Low space requirement
- Halfautomatíc work flow
- Calculation of saw cuts
- Diagnosis function for fast troubleshooting
- Tubes up to 2" (60,3mm)
- Square tubes up to 50 x 50mm
- F1at materíal up ło 60 x 10mm
- T-profile up to 40 x 40 x 5mm