Pfauter Gleason Gear Shapíng Machíne

P150S Gleason-Pfauter Gear Shapíng Machíne
Nominal workpiece diameter
Nominal module
Center distance from cutter spindle to work spindle axis
Maximum cutter spindle rotation
Maximum work spindle rotation
Cutter spindle diameter
Stroke length/stroke rate (strokes per minute)
Stroke position range Z-axis (standard)
Lateral offset setting range Y-axis
Maximum helix angle
Automatic column indination B-axis
X-axis rapid traverse rate
Z-axis rapid traverse rate
Tab1e diameter/bore
( ) Optional
specifications are subject to change without notice

P 200 S
Tech Specs:
Gleason-Pfauter Gear shaping Machine P200S
Nominal workpiece diameter 200 mm
Nominal module 6 mm
Center distance from cutter spindle to work spíndle axis -50/ mrrı
Maximum cutter spindle rotation 300 гpm
Maximum work spindle rotation 300 гpm
Cutter spìndle diameter 85 95 mm
Stroke length/stroke rate strokes per minute 55 mm/1500 spm
110 mm/1000 spm
Stroke position range Z-axis standard 250 mm
Lateral offset setting range Y-axis г +/-25 m m
Maximum helix angle +/- 45
Automatic column inclination B-axis 0 - 12 +/-6
X-axis rapid traverse rate 5000 mm/min
Z-axis rapid traverse rate 2000 mm/min
Table diameter/bore 230/63 mm
Optional
Specifications are subject to change without notice

P300S
Tech Specs.
Gleason-Pfauter Gear shapíng Machine 1 P 300 S
Nominal workpiece diameter 300 mm
Nominal module 6 mm
Center distance from cutter spindle to work spindle axis -55/ mm
Maximum cutter spindle rotation i 300 гpm
Maximum work spindle rotation 300 гpm
Cutter spindle diameter 95 110 mm
Stroke length/stroke rate strokes per minute 110 mm/1000 spm
225 mm/500 spm
Stroke position range Z-axis standard 250 mm
Lateral offset setting range Y-axis +/-25 m m
Maximum helix angle +/- 45
Automatic column inclination B-axis 0-12 +/-6
X-axis rapid traverse rate 4000 mm/min
Z-axis rapid traverse rate 2000 mm/min
Tab1e diameter/bore 350/135 mm
Optional specifications are subject to change without notice

P 500 S

Tech Specs:
Gleason-Pfauter Gear Shapíng Machíne P 500 S
Nominal workpiece díameter 500 mm
Nominal module 8 mm
Center distance from cutter spindle to work spindle axis -50/ mm
Maximum cutter spindle rotation 300 гpm
Maximum work spindle rotation 170 гpm
Cutter spindle diameter 95 110 mm
Stroke length/stroke rate strokes per minute 110 mm/1000 spm
225 mm/500 spm
Stroke position range Z-axis standard 270 mm
Lateral offset setting range Y-axis +/-25 mm
Maximum helix angle +/- 45
Automatic column inclination B-axis +/-6
X-axis rapid traverse rate 3000 mm/min
Z-axis rapid traverse rate 1500 mm/min
Table diameter/bore 510/200 mm
Optional
Specifications are subject to change without notice

P 600 S
Tech Specs:
Gleason-Pfauter shapíng Machíne P 600 S
Generation of a helical geaŕs lead mechanical
Nominal workpiece diameter internal and external gear 600 mm
Nominal workpiece swing 1100 / 880 mm
Nominal module 8 12 mm
Cutter spindle diameter 95 110 mm
Maximum cutter spindle rotary speed 300 235 гpm
Maximum stroke length 110 225 mm
Maximum face width 100 200 mm
Cutter spindle stroke speed range strokes per minute 80 - 800 spm
50 - 500 spm
Cutter spindle drive motor 12 22 kW
Min./max center distance 0- 450 mm
Axial slide position range 250/400 mm
Column inclination range 0 0 - 12
Column lateral offset +/-25 mm
Maximum workspindle speed - 21 гpm
Maximum feed and rapid travers rates:
- axial 1500 mm/min
- radial 3000 mm/min
Total power rating of machine approx. 70 kvA
Machine weight approx. 12,000 kg
Approximate values. Q special order. wíth taiistock column optíon
250 mm = 5tandard axial slide position range for cutter spindle dìameters 95 and 110 mm.
400 mm = Specíal axial slíde position range for cutter spíndle díameters 95 and 110 mm
specifications are subject to change without notice.

P 800 S
Tech Specs:
Gleason-Pfauter Shaping Machíne P 800 S
Nominal workpiece diameter internal and external gear 800 / 1200 mm
Maximum workpíce swíng wíthout taílstock ínternal gear 200 / 1600 mm
Minimum/maximum center distance:
- mechanical shaping head 0 / 520 / 720 mm
- hydraulic shaping head H1 0 / 550 / 750 mm
- hydraulic shaping head H2 0 / 570 / 770 mm
Axial slide position range:
- mechanical shaping head 250 / 400 mm
- hydraulic shaping head 1100 mm
Lowest cutter spindle position above table:
- mechanical shaping head 280 m m
- hydraulic shaping head H1 560 mm
- hydraulic shaping head H2 660 mm
Column lateral offset, mechanical +/- 25 mm
Column lateral offset, hydraulic +/- 50 m m
Maximum table speed 15 гpm
Maximum table load Ì- 10, 000 kg
Machine weight 1 22,000 kg
Values for intermediate size, on P 800 S for P 800/1200 S.
middle stroke posítion upper stroke position
Specifications aгe subject to change without notice.

P 1200 S
Tech Specs:
Gleason-Pfauter shapíng Machíne P1200S
Nominal workpiece diameter internal and external gear 1200 / 1600 mm
Maximum workpice swing without tailstock ınternal gear 1600 / 2000 mm
Minimum/maximum center distance:
- mechanical shaping head 200 / 720 / 920 m m
- hydraulic shaping head H1 0 / 750 / 950 mm
- hydraulic shaping head H2 0 / 770 / 970 mm
Axial slide position range:
- mechanical shaping head 250 / 400 mm
- hydraulic shaping head 1100 mm
Lowest cutter spindle position above table:
- mechanical shaping head 280 mm
- hydraulic shaping head H1 560 mm
- hydraulic shaping head H2 660 mm
Co1umn lateral offset, mechanical +/- 25 mm
Co1umn lateral offset, hydraulic +/- 50 mm
Maximum table speed 10 гpm
Maximum table load 15,000 kg
Machine weight 24,000 kg
. Values for intermediate size, on P 1200 S for P 1200/1600 S.
middle stroke position upper stroke position
Specifications are subject to change without notice.

P 1600 S
Tech Specs:
Gleason-Pfauter shapíng Machíne P 1600 S
Nominal workpiece diameter internal and external gear 1600 / 2000 mm
Maximum workpice swing without tailstock internal gear 2000 / 2400 mm
Minimum/maximum center distance:
- mechanical shaping head 260 / 920 / 1120 mm
- hydraulic shaping head H1 0/950/1150 mm
- hydraulic shaping head H2 0/970/1170 mm
Axial slide position range: .
- mechanical shaping head 250 / 400 mm
- hydraulic shaping head 1100 mm
Lowest cutter spindle position above table:
- mechanical shaping head 280 mm
- hydraulic shaping head H1 560 m m
- hydraulic shaping head H2 660 mmц
Column lateral offset, mechanical +/- 25 m m
Column lateral offset, hydraulic +/- 50 mm
Maximum table speed 8 гpm
Maximum table load 20,000 kg
Machine weight 35,000 kg
Values for intermediate size, oп P 1600 S for P 1600/2000 S.
middle stroke position upper stroke position
specifications are subject to change without notice.

P 2000 S
Tech Specs:
Gleason-Pfauter shapíng Machine P 2000 S
Nominal workpiece diameter ínternal and external gear 2000 mm
Maximum workpice swing without tailstock internal gear 2400 mm
Minimum/maximum center dístance:
- mechanical shaping head 460 / 1120 mm
- hydraulic shaping head H1 0 / 1150 mm
- hydraulic shaping head H2 0 / 1170 mm
Axial slide position range:
- mechanical shaping head 250 / 400 mm
- hydraulic shaping head 1100 mm
Lowest cutter spindie position above table:
- mechanical shaping head 280 mm
- hydraulic shaping head H1 560 mm
- hydraulic shaping head H2 660 mm
Column lateral offset, mechanical +/- 25 m m
Column lateral offset, hydraulic +/- 50 m m
Maximum table speed 6 гpm
Maximum tabie load 30,000 kg
Machine weight 40,000 kg
middle stroke position upper stroke position
Specifications aгe subject to change without notice.

P 2400 S

Tech Specs:
Gleason-Pfauter Shapíng Machíne P 2400 S
Nominal workpiece diameter internal and external gear 2400 / 2800 mm
Maximum workpice swing without tailstock internal gear 2800 / 3200 mm
Minimum/maximum center distance:
- mechanical shaping head 460 / 1320 / 1520 m m
- hydraulic shaping head H1 0 / 1350 / 1550 mm
- hydraulíc shaping head H2 0 / 1370 / 1570 mm
. Axial slide position range:
- mechanical shaping head 250 / 400 mm
- hydraulic shaping head 1100 mm
Lowest cutter spindle position above table:
- mechanícal shaping head 280 mm
- hydraulic shaping head H1 560 mm
- hydraulic shaping head H2 660 mm
Column lateral offset, mechanical +/- 25 m m
Column lateral offset, hydraulic +/- 50 m m
Maximum table speed 6 гpm
Maximum table load 40,000 kg
Machine weight 41,000 kg
Values for intermediate sizes, on P 2400 S for P 2400/2800 S.
middle stroke position upper stroke position
Specifications are subject to change without notice.

P 2800 S
Tech Specs:
Gleason-Pfauter shapíng Machíne P 2800 S
Nominal workpiece diameter internal and external gear 2800 mm
Maximum workpice swing without tailstock internal gear 3200 mm
Minimum/maximum center distance:
- mechanical shaping head
- hydraulic shaping head H1 520 / 1550 mm
- hydraulic shaping head H2 475 / 1570 mm
Axial slide position range:
. - mechanical shaping head
- hydraulic shaping head 1100 mm
Lowest cutter spindle position above table:
- mechanical shaping head
- hydraulic shaping head H1 560 m m
- hydraulic shaping head H2 660 mm
Column lateral offset, mechanical +/- 25 mm
Column lateral offset, hydraulic +/- 50 m m
Maximum table speed 4 гpm
Maximum table load 40,000 kg
Machine weight 60,000 kg
upper stroke position
specifications are subject to change without notice.

P 3200 S
Tech Specs:
Gleason-Pfauter shapíng Machine P 3200 S
Nominal workpiece diameter internal and external gear 3200 mm
Maximum workpice swing without tailstock internal gear 3600 mm
Minimum/maximum center distance:
- mechanical shaping head
- hydraulic shaping head H1 520 / 1750 m m
- hydraulic shaping head H2 475 / 1770 mm
Axial slide position range: .
- mechanical shaping head
- hydraulic shaping head 1100 mm
Lowest cutter spindle positíon above tabie:
- mechanical shaping head
- hydraulic shaping head H1 560 m m `
- hydraulic shaping head H2 660 mm`
Co1umn lateral offset, mechanical +/- 25 m m
Co1umn lateral offset, hydraulic +/- 50 m m
Maximum table speed 4 гpm
Maximum table load 40,000 kg
Machine weight 61,000 kg
upper stroke position
Specifications aгe subject to change without notice.
Tech Specs:
Gleason-Pfauter CNC shapíng Machine GP 200 
with electroníc helícai guíde
Nominal workpiece diameter 200 mm 
Nominal module 6 mm
Cutter spindle stroke гage 80 1, 000 гpm
[Maкimum face wictth ј 100 mm
Min/Max center distance from cutter to work spindle axis П -50/ m m
Axial slide position range 250 mm
Columп inclination range optional 0 - 12
Column material offset +/-25 mm
Maximum stroke length  110 mm -.. _
Cutter spindle diameter  95 mm
Approximate value
Specifications aгe subject to change without notice.

GP 300 ES
Tech Specs:
Gleason-Pfauter CNC shaping Machine 
Nominal workpiece diameter 300 mm
Nominal module 6 mm
Cutter spindle stroke speed range 80 -1, 000 гpm
Maxímum face width
Axial slide position range 250 m m
column inclination range optional 
Colum lateral offset +/-25 mm
Maximum stroke length 110 mm
Cutter spindle diameter 95 mm
Approximałe value
Specifications aгe subject to change without notice

P 400 ES
Tech Specs
Gleason-Pfauter shapíng Machíne P 400 ES
wíth electronic helícal guíde
Generation of a helical gear s lead electronic
Nominal workpiece diameter internal and external gear 400 mm
Nominal workpiece swing 1100/880 mm
Nominal module 8 12 mm
Cutter spindle diameter 95 110 mm
Maximum cutter spindle rotary speed 300 235 гpm
Maximum stroke length 110 225 mm
Maximum face width 100 200 mm
Cutter spindle stroke speed range strokes per minute 80 - 800 spm
50 - 500 spm
Cutter spindle drive motor 12 22 kW
Min./max center distance 0- 350 mm
Axial slide position range 250/400 mm
Column inclination range 0 0 - 12
Column lateral offset +/-25 mm
Maximum workspindle speed 21 rpm
Maximum feed and rapid travers rates:
- axial 1500 mm/min
- radial 3000 mm/min
Total power rating of machine approx. 70 kVA
Machine weight approx. 12,000 kg
Approxímate values. Special order. with taílstock column option
250 mm = Standard axіal slide position range for cutter spindle diameters 95 and 110 mm.
400 mm = special axial slíde posdíon range for cutter spindle díameters 95 and 110 mm
specifications are subject to change without notice.
P 800 ES

Tech Specs.
Gleason-Pfauter shapíng Machine P 800 ES
wíth electroníc helícal guíde
Nominal workpiece diameter internal and external gear 800 / 1200 mm
Maximum workpice swíng without tailstock internal gear 200 / 1600 m m
Minimum/maximum center distance:
- mechanical shaping head 0 / 520 / 720 mm
Axial slide position range:
- mechanical shaping head 250 / 400 mm
Lowest cutter spindle position above table:
- mechanical shaping head 280 mm`
Column lateral offset, mechanical +/- 25 m m
Maximum table speed 15 гpm
Maximum table load 10000 kg
Machine weight 22,000 kg
Values for intermediate size, on P 800 ES for P 800/1200 ES.
middle stroke position
Specifications aгe subject to change without notice.
P 1200 ES
Tech Specs:
GIeason-Pfauter shapíng Machíne P 1200 ES
wíth electronic heiícal guíde
Nominal workpiece diameter internal and external gear 1200 / 1600 mm
Maximum workpice swing without tailstock internal gear 1600 / 2000 mm
Minimum/maximum center distance:
- mechanical shaping head 200 / 720 / 920 mm
Axial slide position range:
- mechanical shaping head 250 / 400 mm
Lowest cutter spindle position above table:
- mechanical shaping head 280 mm`
Column lateral offset, mechanical +/- 25 mm
Maximum table speed 10 гpm
Maximum table load 15,000 kg
Machine weight 24,000 kg
Values for intermediate size, oп P 1200 ES for P 1200/1600 ES.
middle stroke position
Specifications are subject to change without notice.

Tech Specs:
Gleason-PFauter Gear Hobbíng Machíne P 60
Nominal workpiece diameter:
- automatic loading 80 mm
- manual loading 100 mm
Nominal module of machine:
- hobbing appгox. mm
- worm milling appгox. mm
Maximum axial slide travel 220/320 mm
Maximum hob head svøvel angle:
left 45
- right 115
Maximum hob dimensions:
- diameter 118 mm
- toothed length 160 mm
Hob shíft travel shifting 140 mm
Maximum work spindle speed 3,000 - гpm
Minimum / maximum center distance 10/100

Hob head drive rating Г kW
Hob head speed range 200 - 5,000  гpm
Rapid traverse speeds:
- axial 10000 mm/min
- radial 7,500 mm/min
- tangential 5,000 mm/min
Machine weight appгox. 4,800 kg Γ
Special design
Specifications aгe subject to change without notice.
P 90
Tech Specs:
Nominal workpiece diameter:
- automatíc loading 100 mm
- manuaI loading 125 mm
Nominal module of machine
- hobbing approx. mm
- worm milling approx. mm
Maximum axial slide travel 320 400 mm
ıMaximum hob head swivel angle: -1eft 450
- right 1150

Maximum hob dimensíons:
- diameter 118 mm
- toothed length 180 mm
iHob shift travel shifting 160 mm
Maximum work spindle speed 3,000 j гpm
Minimum / maximum center distance 10/100 1 mm
Hob head dríve ratíng j 14 j kW 
Hob head speed range  50 -12,000 rpm
Rapid traverse speeds:
- axial + 10,000 mm/min
- radial 7,500 mm/min
- tangential ı 5,000 mm/min ;Machin e weight [ appгox. 5,000 --- ј - kg
Special Order
Specifications are subject to change without notice.

P210L
Technical data:
iGleason- Přauter Øbíng Machíne - P 210 L
Nomina lwork piece diameter Γ 180 mm
Nominal module approx.
Minimum/ maximum center dístance - 30/130 mm
Maximum axial slide travel i 300 400 - mm
4Hob head swivel range Γ +/- 400
Maximum hob dimensions standard hob head for shaft-type hobs :
Diamete  65 80 mm
- Length 203 240 mm
Maximum hob dimensions Hob head for bore-type hobs 
Diamete 80 mm

ZEA 4
Tech Specs:
Workpíece data
Minimum/maximum outside diameter 201250 mΓm
Minimum/maximum module Іmm
јMaximum gear width mm
јMaximum workpiece length 400 mm
Maximum chamfer with  mm
Tool Data
Minímum/maxímum outside díameter 
Tool bore 40 mm
Tool speed 136 pm

Genesis 130SV
Tech Specs:
woгkрece -data 
Minímum/maximum outside díameter 10 - 130 mm
Maximum module
Mіnіmum/maximum outsíde díameter 200/250 mm
Maximum width
Bore diameter 
The precision of input all NC axes
Taílstock vertical stroke 350 m m
ZS (E) 150 (T)

Tech Specs:
Max workpiece diameter ј 200 mm
Max module mm
Max tooth wídth 45 mm
Max workpiece length 400 1mm
Workpíece data
Clampіg face length/width  1300 x 300 mm
Number of T-slots Г 2 mm
T-slots wídth/distance 18Pf80 mm
Center height tailstocks 350 Імм
Tool Data
shaving cutter head swível range +/-23 deg зe
Total swível range for too/ change - 21
Movement range X-axis - manually Γ-135
Swível range Y-azis +/-2 mm
Center distance cutter azis - workpíece axís 
Max cutfer diameter 270 mm
Cutter spind/e diameter 63. i100 mm
іMax cutter width 

ZS E 30D .

Tech Specs:
Workpíece
Minimum outsíde díameter mm
Maximum outside diameter mm
Maximum module mm

Maximum total width 140 mm
Maximum total length Γ 600/1000 
Tool C
Maximum outside diameter 270 mm
Maximum tool width L mm
shaving cutter bore diameter 0г 100 гpm 
Floor space and weíght
Footprint length x width 3,365 mm x 2,400 mm
Weight 6,800 kg
Speeds 1 Γ
Maximum shaving cutter speed  400 Γ
Approximate value
Special order
Specifications are subject to change without notice.

Tech Specs:
Max workpiece height/option 1100 јmm
Max approx. module/DP, application dependent 12/2 mm/NDP
Max hob setting angle +/- 45 degree
Toτal swivel motion 210 1degree
Mіп number of teeth 2 teeth
Mіп/max center díst hob spindle - work spindle 35-310 Іmm

Mіп/max height work spíndle - hob spindle center 75-600 mm
Min/max distance work spindle - tailstock spindle faces 350-850 јmm
Worktable diameter 220 mm
Max hob dímensíons - díameter x length 160 x 240 İmm
Max hob shift tangential travel 220 imm
Hob arbor díameters/optŕonal 32/40/50 jmm
Hob spíndle speed/optíonal i 100-1000/150-1500 ;гpm
Work spindle speed/optional 1-75 8-150 гpm
Machine diinensions L x W x H x x 3. ì 3 m
Machine weight 26,000 lbs
specifications are subject to change without notice.

GP 200
Tech Specs:
Gleason-Pfautsr łiobbíng Machine GP 200
ONomínal workpiece diameter 200 mm
Nomínal module 5 ımm
Maxímum axial slíde trave l 250 440 mm
Maximum work spindle speed Γ 1,000 pm
Hob head swível range Γ +/-45 
Maulmum hob dímensions standard hob haid 
Diameter 140 mm
Length 220 mm
Min./max. center distance between hob and workpiece - 15/190
Approximate value
Special order
Specifications are subject to change without notice.

GP 300
Tech Specs:
G leason-Pfauter Hobbíng Machine 
Nominal workpiece diameter Γ 300 mm
Nominal module 6 mm
Maximum axial slide travel 250 440 mm
Maximum workspindle speed Γ 125
Hob head swivel range

Maximum hob dimensЮns standard hob head
Diameter 140 мм
Length 220 јмм
Hob speed range selectable 90 - 900 гpm
125 - 1250
150 - 1500
Min./max. center distance between hob and workpiece 15/210 m m
Approximate value
Special order
specifications aгe subject to change without notice.

P 400
Tech Specs

G leаѕon-Pfauber HoØng Machine
Nominal workpiece diameter -- 400
Nominal module 16
Maximum axial slide travel 400 600 mm
Maximum tabie speed 32 64 130 300 pm
Hob head swivel range

Maximum hob dimensions:
- Diameter 240 Гmm
- Length 
Hob speed range selectable 30 - 300 гpm
80 - 800 гpm
160 -1600 гpm
Min/Max center dístance between hob and workpiece 301350 Γm
Approximate value
Special order
Specifications are subject to change without notice.

P 600
Tech Specs:
Gleason-Piauter CNC Øbíng Machine
Nominal workpiece diameter 
Nominal module 16 mm
Maximum axial slide travel 400 600 mm
Maximum table speed 32 64 130 300
Hob head swivel range /-145

Maxіmum hob dímensions:
- Diameter
- Length mm
Hob speed range selectable 1гpm
гpm 
Min/Max center distance between hob and workpiece 30/450 mm 
Approximate value
Special order
Specifícations are subject to change without notice.

P 800
Tech Specs:
Gieason-Pfauter Hobbíng Machíne P 800
Nominal workpiece diameter 800 1200 mm
Nominal module 20/30+ 30/40+ mm
Maximum axial slide travel 700 1000 1300 1600 Γm
Maximum table speed 15 
Maximum hob dimensíons: y

- Diameter 270 mm
- Length 300 
Hob speed range 25 - 250 min
33 - 330 min
45 - 450 min

Min/Max center distance between hob and workpiece 50/550 mm
50П50 mm
Approximate values
+ Profile milling
Above 1300 mm with reduced speed and feed rates
Special order
Specifications are subject to change without notice.

P 2800

Tech SØcs.
Gleason-PfauØr Hobbing Machine P 2800

Nominal workpiece diameter
20/30+ 30/40 - јmm 
Nominal module
Maximum axiaI slíde travel Г 00 1000 1300 mm

Maxímum table speed
Max mum hob dímenslorıa:
Diameter 370 mm
Length 400 mm
Hob speed range 20 - 200
26 - 265
36 - 360 min
Mín/Max center distance between hob and workpiece
700/1600
Approximate values
Special order
+ Profıle milling
Above 1300 mm only with reduced speed and feed rates.
Specifıcations are subject to change without notice.

P 1600
Tech Specs:
Gleason-PFauter Hobbíng Machíne P Івoo
Nominal workpiece diameter 1600 2000 mm
Nominal module 20/30+ 30/40 mm
Maximum axial slide travel Γ700 1000 1300 1600 mm
Maximum table speed ` 8 min 1
Maximum hob dimensíons:

- Diameter 350 m m
- Length 375 m m
Hob speed range 20 - 200 mm
26 - 265 min
36 - 360 min
Min/Max center distance between hob and workpiece 85/1030 mm
100/1200 mm
Approximate values
special order
+ Profıle milling
Above 1300 mm with reduced speed and feed rates
Specifıcations are subject to change without notice.

P 2000
Tech Specs:
Gleason-Рfauber Hobbíng Machíne 2000
Nominal workpiece diameter 2000 m m
Nominal moduie 20/30 30/40` mm

Maximum axial slide travel 700 1000 3000 1600 m
Maximum table speed
Maximum hØ dimensions:
Díameter 350 - 375.mm
Length
Hob speed range 20 - 200 ---- min
26 - 265 min
36 - 360 min
Min/Max center distance between hob and workpiece 300/1200 - mm
300/1400 `mm
Approximate values
Special order
+ Profile millıng
Above 1300 mm oпly with reduced speed and feed rates
specifications aгe subject to change without notice

Tech Specs:
Gieason-Pfauter liobbing Machine P 2440

Nomínai workpíece díameter mm 2400 2800
Nomínal module
20/30+ 30/40+ mm

iMaximum axiaí slide travel 700 1000 1300 mm
1600
Maximum table speed min

Diameter 370 Γmm
Length 400 mm
Hob speed range 20 - 200
26 - 265
36 - 360 min
Min/Max center distance between hob and workpiece 700/1400
700/1600
Approximate values
Special order
+ Profıle milling
Above 1300 mm only with reduced speed and feed rates.
Above 2400 mm only with reduced speed and feed rates.
Specifications are subject to change without notice.

P4
Tech Specs:
Gleason-Pfauter Hobbíng Machine
Nominal workpiece diameter Г 4000 5000 mm
Nominal module  35/45+ mm
Maximum axial slide travel 1400 2000
Maximum table speed
Max hob dímensions
Diameter 500 mm

P 400 G
Tech Specs:
Gleason-Pfauter Profıle Gríndíng Machíne P 400 G
Nominal workpíece díameter 400 mm
Maximum gńndable profıle depth 35 45 mm
Maximum axial slide travel 400 600 1000 mm
Grinding head swivel range +/-45
Maxímum gríndíng wheel dímensions :
- Díameter 350 mm
- Wıdth 50 70 mm
Grinding wheel speed range 600 - 6000 гpm
Min./max. distance between gríndíng wheel and workpiece axis 0/400 mm
Special order
other grinding spindles on request.
Specifications are subject to change without notice.

P 600 G
Tech Specs:
Gleason-Pfauter Profıle Gríndíng Machíne P 600 G
Nominal workpíece diameter 600 mm
Maximum axial slide travel 400 600 1000 mm
Grinding head swível range +/-45
Maximum gríndíng wheel dímensíons :
- Diameter 350 mm
- Wıdth 50 70 mm
Grínding wheel speed range 600 - 6000 гpm
Min./max. distance between grindíng wheel and workpiece axis 0/600 30/710 mm
Specìal order
other grinding spindles on request.
Specifications aгe subject to change without notice.
.
P800G t:

Tech Specs:
Gleason-Pfauter Profile Grínding Machíne P 800 G
Nominal workpiece diameter 800 mm
Maximum grindable profile depth external gear 80 100 mm
Maximum axial slide travel 700 1000 1300 1600 tmm
Maximum gríndíng wheel dimensíons external grindíng head :
- Diameter 400 τmm
- 24 kW 450

- 50 kW
- Width
- 24 kИ/ 80 100 mm
-50kW 160 1mm
Grinding wheel speed range
-24kW 1200 6300 гpm
- 50 kW 400 - 4000 rpm
Min./max. center distance between grinding wheel and 100/700 mm workpiece axis
Special order
Specifıcations are subject to change without notice.

PI000G
Tech Specs:
Gleason-Pfauter Profle Gríndíng Machíne P 1000 G
Nominal workpiece diameter 1000 mm
Maximum grindable profıle depth external gear 80 100 mm
Maxіmum axial slide travel 700 1000 1300 1600 mm
Maximum grindíng wheel dímensíons external gríndíng head :
- Díameter 400 mm
- 24 kW 450
- 50 kW
- Width
-24kW 80 100 mm
-50kW 160 mm
Grinding wheel speed range
- 24 kW 1200 6300 гpm
- 50 kW 400 - 4000 гpm
Min./max. center distance between the gńnding wheel and 100/800 mm
workpiece axís
Special order
Speciñcations aгe subject to change wíthout notice.

P 1200 G
Tech Specs:
Gleason-Pfauter Profıle Gríndíng Machíne P 1200 G
Nominal workpiece diameter 1200 1480 mm
Maximum gńndable profıle depth external gear 80 100 mm
Maximum axial slide travel 700 1000 1300 1600 mm
Maxímum grínding wheei dimensions external grindíng head :
- Diameter 400 mm
- 24 kW 450
- 50 kW
- Width
- 24 kW 80 100 mm
- 50 kW 160 mm
Gríndíng wheel speed range
- 24 kW 1200 6300 гpm
- 50 kW 400 - 4000 rpm
Min./max. center dístance between gńnding wheel and 100/900 mm
workpiece axis
Special order
Specifications are subject to change without notice.

P 1600 G
Tech Specs:
Gleason-Pfauter Profíle Gríndíng Machíne P 1600 G
Nomínal workpíece díameter 1600 mm
Maximum gńndable profıle depth external gear 80 100 mm
Maximum axial slide travel 700 1000 1300 1600 mm
Maximum gríndíng wheel dimensíons external gríndíng head :
- Diameter 400 mm
- 24 kW
. - 50 kW 450
- Wıdth
-24kW 80 100 mm
- 50 kW 160 mm
Grinding wheel speed range
- 24 kW 1200 6300 гpm
- 50 kW 400 - 4000 гpm
Mín./max. center distance between grinding wheel and 100/1100 mm
workpíece axís
Special order
Specifications are subject to change without notice.

P 2000 G
Tech Specs:
Gleason-Pfauter Profıle Gríndíng Machíne P 2000 G
Nominal workpiece diameter 2000 mm
Maximum gńndable profıle depth external gear 80 100 mm
Maximum axial slíde travel 700 1000 1300 1600 mm
Maximum gríndíng wheel dimensíons external gríndíng head :
- Díameter 400 mm
- 24 kW
- 50 kW 450
- Wıdth
- 24 kW 80 100 mm
- 50 kW 160 mm
Grinding wheel speed range
- 24 kW 1200 6300 гpm
- 50 kW 400 - 4000 гpm
Min./max. center dístance between grinding wheel and 100/1200 mm
workpiece axis
Special order
Specifıcatíons aгe subject to change without notice.

P 2400 G
Tech Specs:
Gieason-Pfauter Profile Gríndíng Machine P 2400 G
Nominal workpiece diameter 2400 mm
Maximum grindable profile depth external gear 80 100 mm
Maximum axial slide travel 700 1000 1300 1600 mm
Maximum gríndíng wheel dimensions externai grínding head :
- Diameter 400 mm
- 24 kW
. - 50 kW 450
- Width
- 24 kW 80 100 mm
-50kW 160 mm
Grinding wheel speed range
-24kW 1200 6300 rpm
- 50 kW 400 - 4000 rpm
Min /max. center distance between grinding wheel and 300/1500 mm workpiece axis
Special order
Specifications are subject to change without notice.

P 2800 G
Tech Specs:
Gleason-Pfauter Profıle Gríndíng Machíne P 2800 G
Nominal workpiece diameter 2800 mm
Maximum gńndable profıle depth external gear 80 100 mm
Maximum axia1 slíde travel 700 1000 1300 1600 mm
Maximum grínding wheel dímensíons external gríndíng head :
- Diameter 400 mm
- 24 kW
- 50 kW 450
- Wıdth
-24kW 80 100 mm
-50kW 160 mm
Grindíng wheel speed range
- 24 kW 1200 6300 rpm
- 50 kW 400 - 4000 rpm
Min./max. center distance between grindíng wheel and 600/1700 mm
workpiece axis
Special order
Specífications aгe subject to change wíthout notice.

P 3200 G

Tech Specs:
Gieason-Pfauter Profile Grindíng Machine P 3200 G
Nominal workpiece diameter 3200 mm
Maximum grindable profıle depth external gear 80 100 mm
Maximum axial slide travel 700 1000 1300 1600 mm
Maximum gríndíng wheel dímensíons external gríndíng head :
- Diameter 400 mm
- 24 k W
- 50 kW 450
- Wıdth
- 24 kW 80 100 mm
- 50 kW 160 mm
Grinding wheel speed range
- 24 kW 1200 6300 гpm
- 50 kW 400 - 4000 гpm
Min./max. center distance between grinding wheel and 600/1900 mm
workpiece axis
Special order
Specifications are subject to change without notice.

P 4000 G 
Tech Specs:
Gleason-Pfauter Profıle Gríndíng Machíne P 4000 G
Nominal workpiece diameter 4000 mm
Maximum gńndable profıle depth external gear 80 100 mm
Maximum axial slide travel 700 1000 1300 1600 mm
Maximum grinding wheel dímensíons external grinding head :
- Diameter 400 mm
- 24 kW
- 50 kW 450
- Wıdth
- 24 kW 80 100 mm
- 50 kW 160 mm
Grinding wheel speed range
- 24 kW 1200 6300 гpm
- 50 kW 400 - 4000 гpm
Min./max. center distance between the grindíng wheel and 600/2300 mm
workpiece axis
Special order
Speciations aгe subject to change without notice.

P 5000 G
Tech Specs:
Gleason-Pfauter Profile Gríndíng Machíne P 5000 G
Nomínal workpiece diameter 5000 mm
Maximum grindable profıle depth external gear 80 100 mm
Maximum axia1 slíde travel 700 1000 1300 1600 mm
Maximum gríndíng wheel dímensíons external gríndíng head :
- Diameter 400 mm
- 24 kW
- 50 kW 450
- Wıdth
- 24 kW 80 100 mm
- 50 kW 160 mm
Grinding wheel speed range
- 24 kW 1200 6300 rpm
- 50 kW 400 - 4000 гpm
Min./max. center distance between grinding wheel and 600/2800 mm workpíece axis
Special order
Specifıcations aгe subject to change without notice.

P 90 G
Tech Specs:
Gleason-PFauter Gríndíng Machine P90G
Nominal workpiece diameter
- automatic loading 100 mm
- manual loading 125 mm
Nominal module of machine
- threaded wheel grinding Appг mm
- profile grinding Appг mm
- index generation grinding Appг mm
Maximum axial travel Γ 300/400 јmm Γ
Grinding hob swivel range Left 45 / Right 115
Maximum gríndíng wheel:
- Form wheel diameters 115 mm
- Grinding worm diameters 100 imm
- Grinding worm length 180

Maximum work spindle speed 3000
Minimum/maximum center distance 10/100
Grinding wheel drive rating 14 kW
Grinding wheel speed range 50 12000/20000 гpm
Rapid traverse speeds:
- axial 10000 mm/min
- radial 7500 mm/min
- tangential 5000 mm/min
Machine weight without filtration unit Appг kg
Special design
Only for CBN grinding wheels, machine suitable for threaded wheel grinding, profile grinding, index generation grinding and hobbing.
specifications are subject to change without notice.