SNG heavy duty Horizontal lathe cnc

HEAVY DUTY HORIZONTAL LATHE SNG 2500 x 12000 CNC TYPE LEFT HALF OF THE ORIGINAL MACHINE

MAIN FEATURES Work piece:

Maximum swing over the bed guide ways

Maximum swing over saddle

Distance between centers: 12000mm

Diameter of the face plate with four independent jaws: mm

Maximum load between centers

Axial load on the center of the headstock

Radial load on the center of the headstock

Maximum load between face plate and steady

Maximum load on a single steady rest

Maximum load supported by faceplate

Maximum load supported only by faceplate, without any auxiliary rest: 600mm distance from faceplate front surface.

Headstock:

Spindle speed range: 4 steps

Main motor, S11:M1 NS type, not included

Power: kW max. 200 kW

Base speed

Maximum speed: 2ΠU0

Maximum torque at daN x m

The slides groups:

Cross slide travel: mm

Working and rapid feed rates of the longitudinal slide

Working and rapid feed rates of the cross slide

Tool carrier feed mechanism type Z axis: double pinion rack, backlash free system.

Measuring system Z axis rack/rotary encoder type.

Cross saddle feed mechanism X axis screw type.

Measuring system X axis encoder type.

Servomotors 1FT 6 SIEMENS type not included Nm / 2000

Guiding system of longitudinal saddle and the cross saddle blocks:

Linear bearings sets x GRT 3= 5 pcs. plus GRT 4= 3 pcs. for each saddle. NOTE: The longitudinal saddle and the cross saddle are provided with the same guiding system.

Tailstock:

Tailstock quill square section: ΠΠO x 1000 mm.

Tailstock shaft travel automatically: mm.

Quill rapid motion: mm/min.

Tailstock rapid motion: 2 steps mm/min.

Beds:

Headstock bed:

Number of guideways

Bed width: mm

Guideways width: 2 pcs. = 170 plus 1 pc. = 180 mm.

Tool carrier bed:

Number of guideways

Bed width: mm

Guideways width: 2 pcs. = 120 plus 1 pc. = 100 mm.

Overall dimensions and weight approximately:

Length: 1.ΠΠ0 mm

Built-in basic machine, electric cabinet included: height, 700 mm.

Weight without special attachments: To.

Standard Accessories:

Set of tools for assembling operation

Set of leveling blocks for the bed

Steady rest roller type, 2 pieces

Electrics and numerical control: The machine will be prepared for motors, electronics and numerical control SIEMENS 840 D. Approximately installed power: 250 KVA.

DELIVERY SET The delivery set includes:

Bed

Fixed-stock

Tailstock

Slides group

Control panel arm

Hydraulic unit, ATOS type components

Case with foundation

Case with various parts

Telescopic covers fitted on beds

Steady rests: 2 pieces.