Breda R32 RADIAL DRILL

BREDA radial dríll  radíalbohrmaschine SPINDLE CONTROL SPINDLE SPEEDS CONTROLS BOARD with STANDARD ELECTRIC SYSTEM
Spindle controls enable the Controls for: lock-off main switch low-volt controls following functions: forward engagement of low-volt controls contactors to standards IEC-rapid traverse stop warning light to indicated VDE-CSA fine feed inversion of rotation MACHINE READY TO WORK protections against short-circuits, direct change of speeds manual micrometric feed
SINGLE coolant pump switch overloads, accidental moves.
engagement and LEVER control pushbuttons for emergency stop pushbutton dísengagement of automatic arm vertical traverse protection against fall of tension feed 
AUTOMATIC FEED
stop of automatic feed at electric limit-switches for autom. stop of spindle when arm
Direct-selection change possible automatic stop of arm vertical is unclamped desired depth while spindle in motion. traverse.
safety automatíc SAFETY CONTROLS AGAINST
disengagement at end of ACCIDENTAL MOVES traverse of quill.

FIXED BOXTABLES TILTING BOXTABLES MACHINE LIGHTING ADJUSTABLE WEDGES
Aгe obtained from cast-íron Aгe designed for a rotation angle 24 V auxíliary círcuít Serve to the perfect and easy castíngs and properly reínforced of 90 halogen lamp 70 W leveliing of the machine. by ríbs. Adjustment of the ínclination is waterproof - protectíon 1P 65 Are to be fitted in the T-slots for the clamping of made with a crank via a worm switch on the reflector corresponding position of the workpieces are obtaíned on their screw and a worm wheel. anchoríng bolts. articulated arm wíth 5 turnable horizontal and vertícal surfaces, T-slots for the clamping of axis Aгe to be used in place of the square machíned. workpieces are obtained on the light is concentrated even on fíxed wedges.
machined surfaces. long distance large working area is lighted

LIGHTING SYSTEM CONFORMS TO SAFETY REGULATIONS.

HYDRAULIC CLAMPS AUXILIARY COLUMN FOR ARM REAR VIEW
Electro-hydraulic clamps for STIFFENING. Electríc wíríng, cooling pipíng, clampíng piping etc. are fastened head and column are available stiffens the arm and makes it a together to a supportíng steelband so that they can move rationally as extra outfit in place of manual síngle unit with the base. and let the working area free from any encumerment.
clamps In standard version. is necessary when heavy and The cooling system, standard outfit, consists of a tank for collection
They consist of an hydraulíc precise machiníng ís required and decantatíon of the coolant, electropump, pipíng and tap.
station controlled by pushbuttons keeps horizontal alignment wíth
and of hydromechanic irreversíble base even in the varíous servo-mechanisms. swingíng positions.
aгm vertical traverse does not function when auxiliary column ís clamped.

HEAD
12 spíndle speeds obtained from a selector of range via a sìngle lever that controls clutches and gearbox.
Lamellar clutches for spindle rotatíon and inversíon of dírection.
Automatic lubricatíon of all components by a reversible pump.
Spindle is fitted on precision bearíngs of large diameter.
Spindlelquill unít is balanced by a guided counterweíght.
Safety against the fa11 of spíndle-quíll.