Brigeport V 4840/ V 710 Vertical Machining Centers

BRIDGEPORT V480 / V710 HARDINGE  Vertical Machining Centers 
HIGHER EFFICIENCY
Faster machiníng duty cycle tíme, lower non-cuttíng time.
Spíndle motor rpm
direct dríve wíth Max. torque Nm at base speed.
Fanuc axíal servo motor kW on X,Y axes, 3kW oп ZAxís.
Rapid traverse feed, max. rapid and jog 48m/mіn.
Max. rigíd tappíng speed 6,000 rpm.
Acceleratíon reaches on X,Y Axes and oп Z Axís.
V480

RlGID STRUCTURE
Longer tool life and higher heavy cutting abílíty
V110
FEA Finite ElementAnalysís techniques were used to desígn and bui1d a rígíd, structurally-balanced machine to assure optimum rígídíty and life.
Two linear guideways on and two BRIDGEPORT DESIGNED AND BUILT A COMPLETE RANGE guide trucks per and Z
OF V SPEEDM1ll SERIES TO SU1T VARIOUS MACHINlNG
Axes feature two línear guídeways wíth two heavy-duty guíde trucks  REQUIREMENTS
guideway,

Ground Ballscrew Features

Low noise, low thermal growth, and heavy-duty transmission.

Low inertia coupling directly connects between ballscrews and axial servo motor.

Part Material: S45C ADC 12 S45C ADC 12

Tool Ø: HSS Ø30 HSS Ø40 (4 inserts).

Spindle Speed (rpm): 500 / 930 / 300 / 220.

Spindle Speed (rpm): 3,000.

Cutting Amount / Feed Rate (mm/min): 90 / 232 / 600 / 660.

Cutting Speed: 72:30 x 4 x 600 cm/min.

Machine Design

Rigid C-frame fixed column design.

The spindle carrier, column, and base are manufactured from high-quality cast iron, contributing to overall rigidity and machining capabilities.

Part Material: S45C ADC 12 S45C ADC 12.

Tool Ø: HSS Ø24 HSS Ø80 (6 inserts).

Spindle Speed (rpm): 330 / 740 / 400 / 200.

Spindle Speed (rpm): 1,500.

Cutting Amount / Feed Rate (mm/min): 66 / 222 / 1,000 / 700.

Cutting Speed: 189:60 x 900 cm/min.

EXCELLENT AND STABLE ACCURACY

Stable static and cutting accuracy.

Accurate Positioning Accuracy: ISO230-2 Full stroke positioning accuracy (mm).

Accurate Repeatability Accuracy: ISO230-2 Full stroke repeatability accuracy (mm).

Ball-Bar Contouring Test and Laser Compensation for each machine ensure geometric and cutting accuracy.

Superior Cutting Capability.

CHIP CONVEYOR OPTION

RIGID STRUCTURE, SUPERIOR RELIABILITY

FANUC 0i MF CONTROL UNIT

6-panel color LCD.

PCMCIA card slot for operator use.

1280 meters, 512KB memory length, graphic display, and manual guide.

Tool life management and other advanced features.

Standard Versatile Operator Panel

Designed for user-friendly operation.

Includes cycle start, feed hold, optional stop, feed/rapid/spindle override, and machine mode selection switches.

Manual Pulse Generator

Provided as a standard feature.

COOLANT TANK AND MOTOR SA ATC TYPE
170 liter coolant tank capacity plus chip screens ensure good V480 / V710 coolant flow. High-volume coolant chip flush system surround enclosure and auger type chip conveyor as optional allows chíp evacuation on waycovers and enclosure into chíp pans.

SWING ARM ATC 20 TOOLS
Rapid and stable too1 change system operated by RIGID MACHINE BASE cam type mechanism, 90 tool pocket prevents tool  dropping. Synchronized swíng arm ATC features superior tool changíng capabílity.
V480 / V710 40 TAPER -10,000 RPM POWER 8 TORQUE
CHARACTERISTIC CURVE
FANUC ALL3113 / 10,000 RPM SPINDLE MOTOR


Spindle Speed RPM 1500 4500 RPM
Spindle Speed RPM
V480 / V710 30 TAPER]-15,000 RPM POWER 8 TORQUE
CHARACTERISTIC CURVE
FANUC A1L3112 / 20,000 RPM SPINDLE MOTOR SPEED 

Spíndle Speed RPM Spindle Speed RPM
Fanuc
Siemens 1726-2156 Siemens
Fanuc CTS 1885 -2315 Fanuc CTS
DiMENS10NAL DRAWINGS V480 
Carousel Type X x Y xZ 480 x 400 x 430 N/A mm 
SAATC X xY xZ 480 x 400 x 430 mm 
Table Surface SAATC Carousel SAATC Axis Mocor Ratíng X,Y / 3 Z kW
Spíndle Center to Column 429 420 mm
spindle Bearing Grease
Table Dímensíon 600 x 400 mm Línear Guideways Grease
Weíght  Max. 300 250 kg Ball Screw Grease
T-Slots 14mmx3x125mm Width x No. x Pítch
Coolant Tank Capacity 170 liter
Chip Flush Rate 40 líter
10hp/ Mocor Ratíng Max. 53 25 S3 25
Speed Max. 10,000 Belt Drive 15,000 Direct Dríve гpm Compressed Air Reg. Min. 70 psi, Torque Max. N-m Power 5upply Requirement 52A FLA / 220V / 3 Phase
Tapping Speed Max. 3,000 гpm

Coolant Through Spindle 280 psi 20 Bar
Diameter 32 Chip Flush System
4th Axis Rotary Tables
Rapid and Traverse Rate 36 48 m/min Chip Wash Down Hose
Cutting Feed Rate Max. 12 15 m/min Siemens 828D Controller
10K RPM Direct Drive Spindle 40
16 Carousel - Standard 12K RPM Direct Drive Spindle 40
Tool Capacity 20 Swing Arm 20 Swing Arm - Option 15K RPM Direct Drive Spindle 40
Tool Selection Bi-Directional 20K RPM Direct Drive Spindle 30
BT or CAT or SK BT or CAT or SK Tool Holder Type 24K RPM Direct Drive Spindle 30 or ANSI 40 or ANSI 30

Chip Conveyor Auger Type Hinge Type Scraper Type
Tool Diameter Max. 94 Full N/A mm Z Axis Column Raiser 200 mm Carousel Type 130 Adj. Pockets Empty
Tool Probe / Pre-Wiring Tool Diameter Max. 80 Full mm
SA ATC Type 130 Adj. Pockets Empty Part Probe / Pre-Wiring
Tool Length Max. Fast Ethernet Interface + D/S 2GB Memory Card 190 mm
SA ATC Type A1CC11 Pre-read 200 Blocks
Tool Weight Max. 6 N/A kg Carousel Type
Tool Weight Max. 7.4 kg SA ATC Type
Tool Change Time Avg. C-C N/A sec Carousel Type
Tool Change Time Avg. 2 C-C 4 C-C sec SA ATC Type

To keep improvements and developing new functions, Hardinge Taiwan reserves the rights to change specifications without further notice.
Due to varying cutting conditions, actual results may be greater or less than those listed.

Carousel Type
X x Y x Z 710 x 400 x 430 N/A mm Positioning All Axes mm
SA ATC X x Y x Z 100 x 400 x 430 mm Repeatability mm
Spindle Nose to 150 - 580 150 - 580 mm Table Surface SA ATC Carousel
SA ATC Axis Motor Rating X, Y / 3 Z kW Table Front End to Door 150 mm Coolant Flush Motor kW
Spindle Center to Column 429 420 mm Spindle Bearing Grease
Table Dimension 800 x 400 mm Linear Guideways Grease
Weight on Table Max. 300 250 kg Ball Screw Grease
T-Slot 14 mm x 3 x 125 mm Width x No. x Pitch
Coolant Tank Capacity 170 liter Chip Flush Rate 40 liter/min
10 hp / 10 hp Motor Rating Max. S3 25 S3 25 Speed Max. 10,000 Belt Drive 15,000 Direct Drive rpm
Compressed Air Reg. Min. 70 psi, 5 kg/cm²
Torque Max. N-m Power Supply Requirement 64A FLA / 220V 3 Phase
Tapping Speed Max. 3,000 6,000 rpm

Coolant Through Spindle 280 psi 20 Bar
Diameter 32 Chip Flush System
4th Axis Rotary Tables
Rapid and Traverse Rate 36 48 m/min Chip Wash Down Hose
Cutting Feed Rate Max. 12 15 m/min Siemens 828D Controller
10K RPM Direct Drive Spindle 40
16 Carousel - Standard 12K RPM Direct Drive Spindle 40
Tool Capacity 20 Swing Arm 20 Swing Arm - Option 15K RPM Direct Drive Spindle 40
Tool Selection Bi-Directional 20K RPM Direct Drive Spindle 30
BT or CAT or SK BT or CAT or SK Tool Holder Type 24K RPM Direct Drive Spindle 30 or ANSI 40 or ANSI 30

Chip Conveyor Auger Type Hinge Type Scraper Type
Tool Diameter Max. 94 Full N/A mm Z Axis Column Raiser 200 mm Carousel Type 130 Adj. Pockets Empty
Tool Probe / Pre-Wiring Tool Diameter Max. 80 Full mm
SA ATC Type 130 Adj. Pockets Empty Part Probe / Pre-Wiring
Tool Length Max. Fast Ethernet Interface + D/S 2GB Memory Card 250 N/A mm
Carousel Type A1CC11 Pre-read 200 Blocks
Tool Length Max. 190 mm SA ATC Type
Tool Weight Max. 6 N/A kg Carousel Type
Tool Weight Max. 6.3 kg SA ATC Type
Tool Change Time Avg. C-C N/A sec Carousel Type
Tool Change Time Avg. 2 C-C 4 C-C sec SA ATC Type

To keep improvements and developing new functions, Hardinge Taiwan reserves the rights to change specifications without further notice.
Due to varying cutting conditions, actual results may be greater or less than those listed.