Cotek HS 1000 sheetmetal working machine

COTEK SHEETMETAL WORKING MACHINES
Dear Customers, are a group which have been in the line of inetalworking and
woodworking machinery for more than 15 years.
Cotek s business now covers Italy, Germany, Austria, Spain, France, Holland, Russia, USA, Australia, New Zealand, Canada, Brazil. Why do Cotek have so many customers?
The following are the answers:
Good Quality Contro/: We have professional engineers who travel around factories to strictly inspect every machine before shipment.
Favourable Prices: With so many customers support, Cotek can always place big orders
and obtaín favourable príces. 
Strong After-sa/e-service: We understand well how important the after-sale service mean in business of machinery. So we have professíonal engineers who are specially in charge to organíze spare parts from factories. Many spare parts from Cotek are sent to customers by speed post.
Welcome your inquiry. And thank you for your support
COTEK TEAM SHEARS
HAND LEVER SHEAR HS-1000B HAND SW1NG-BEAM SHEAR HSB SERIES
Cast íron constructíon Steel-weldíng constructíon
Model Cuttíng wídth Cutting thíckness Back gauge range
HS-1000B  
HSB-40  
HSB-60  
HSB-80  
FOOT SHEAR FS SERIES FOOT SHEAR FK SERIES
Cast íron construction Steel-weldíng constructíon
Mode1 Cutting wídth Cuttíng thíckness Back gauge range
FS-37 1000mm 37 0-840mm 410kg
FS-52 1320mm 52 0-840mm 480kg
FK-50 1300mm 50 0-600mm 320kg
FK-60  
FS-80  
SHEARS
MOTORISED SHEAR
FEATURES OF MF SERIES:
Standard Gear Brake Motor
Fast Cutting Speed with Low Noise
Optímum Cuttíng Angle
Síngle Cut or Contínuous Cut
Cuttíng Line Lightíng
Manual Back Gauge wíth Mechanical Counter
24V Mohíle Foot Swítch
CE Safety Guardíng
OPTIONAL
Cut counter
Aír sheet support
THICKNESS WIDTH CUTTING BACK GAUGE MOTOR N. W.
MODEL
MM MM ANGLE MM KW KG
SHEARS
MG SERIES W1TH :1ANUAL BACKGAUGE
MG SERIES W1TH ЛOTORISED BACKGAUGE + DRO
FEATURES OF MG SERIES:
Heavy duty constructíon Rapid blade adjustment
Fitted with brake motor and gear reduction box Heavy duty squaring aгm and front support aгm with scales single or multíple cutting Air sheet support is optional
THICKNESS WIDTH CUTTING BACK GAUGE MOTOR N. W.
MODEL
MM MM ANGLE MM KW KG
SHEARS
SWING BEAM HYDRAULIC GUILLOTINES SB SERIES
Rapid blade clearance adjustment
Motorised backgauge caп swíng away for cutting long sheets sliding device for cut piece
Light beam rear guardíng 
Digital Readout for backgauge travel + cut counter Special design fınger guard for easy material access
SHEARS FEATURES OF SB SERIES: OPTIONAL:
All steel-welding construction 1000mm power back gauge
Shadow line lighting Ball leadscrews for backgauge
Transfer balls on table and support arms NC system for programmable backgauge
Omega OEM USA hydraulic system CNC system for programmable backgauge, cutting length and blade clearance or Rexroth Bosch hydraulic valves Air sheet support devíce
Heavy duty squaring arm with flip over stop Variable cutting stroke adjustment
lndividual hydraulic hold downs with nylon pads
Simens telemecanique electrical components 4-edge cutting blades
THICKNESS W1DTH CUTTING BACK GAUGE MOTOR N. W. MODEL
SHEARS
VARIABLE RAKE HYDRAULIC SHEAR VK SERIES
Digital Readout for backgauge travel + cut counter
Rapid adjustment of blade cleareance
Variable adjustment of cutting angle between blades
Motorised backgauge can swing away for cutting long sheets
FEATURES OF VK SERIES:
slídíng device for cut piece
All steel-welding construction
Light beam rear guarding
Shadow line Iighting
Optional air sheet support
Transfer balls on table and support arms
Rexroth Bosch hydraulic valves
OPTIONAL:
Heavy duty squaring arm with flip over stop 1000mm power back gauge
Variable cutting stroke adjustment
Ball leadscrews for backgauge 
lndividual hydraulic hold downs with nylon pads
NC system for programmable backgauge
Simens telemecanique electrical components
CNC system for programmable backgauge, cutting length and blade clearance
4-edge cutting blades
SHEARS
Guide roller Qblique blok
Polyester cover Clamp 
Back gauge Cutting angle
Blades 4 edges 
Work piece lndependent controls of cutting ariqie aгe importarıt to mirıinıíze the deformation
Blade clearance of workpiece during cutting.
Blade beam guidíng
Three pairs of rollers A, B and C precisely guide the angled movement of the beam,
straight and vertical cut edge is obtained, reducing burrs and friction between the upper
and lower blades.
THICKNESS W1DTH CUTTING BACK GAUGE MOTOR N. W. MODEL
SHEARS
CIRCULAR CUTTER CC-2 Mode1 Capacity CIRCULAR CUTTER CC-3
MANUAL NOTCHER MN-4 MANUAL NOTCHER MN-3
Optional stand for MN-4
Model Pressure Thíckness 900 cut Ram stroke
FEATURES: 3-1N-1 COMBINATION MACHINE
Combinatíon shear, brake, roll in one compact machine 
Right or left hand operation
Section fingers in brake are easy to remove and re-position for box, channel and other complex work
Ground rolls are equipped with wire grooves
Optíonal stand
SHEARS HYDRAULIC NOTCHER HN-200A
include two miter gauge and scale
THICKNESS BLADE LENGTH MIN. NOTCHING MAX. NOTCHING MOTOR N. W.
MODEL
MM MM ANGLE ANGLE KW KG
HN-200A  
HP-30 HP-100 HPB SERIES wíth Bendíng Tools
Model Capacity Power Piston stroke Weight
Shovel HP-20 HPB-490 20 T
Punch HP-30 HPB-580 30 T KW 
HP-50 HPB-790 50 T 2
Rivet
SHEARS + PUNCHERS HYDRAULIC IRON WORKERS IW-75 HYDRAULIC IRON WORKERS IW-55
Two cylinders and 5 workìng stations
Two pedal switch allows two people to work
Large punch table with multi-purpose bolster removable table block for overhang channel/beam flange punching
Power inching and adjustable strokes at punch and shear station
Alternative rectangular/vee notching facility
Punch pressure 550kn 750kn 1100kn 1400kn
Punch capacity Ø 25 x 16mm 030 x 20mm 035 x 25mm 
Punching Depth of throat 300mm 355mm 400mm 600mm
Stroke length 8Omm 80mm 80mm 80mm
Circle /min 3/4 24 24 24 28
Flat bar 
Shearing Thíck. x Wídth 8x400mm 10x480mm 16x660mm 20x600mm
Blade length 410mm 485mm 610mm 610mm
bar square bar 40x40mm 50x50mm 50x50mm 55x55mm
shearing Round bar  
Angle 45 Angle shear  
shearíng 90 Angle shear 
Notching Thìck. x Width x Depth 
Channel shearing  
Specíal Beam flange shearing 12mm 16mm 20mm 28mm
Tools Bending 500 x 4mm 500 x 4mm 600 x 4mm 600 x 4mm
Power of motor 
Net weíght 1600kg 2000kg 4β00kg 6800kg
SHEARS + PUNCHERS
Punching Statíon Punching Statíon
Full range of universal punches and dies available Large view window on stripper.
Unique style allows for large angle iron punching and swing away design for ease of operatìon large channel punching Quick change coupling nut and sleeve for rapid replacement oг change.
Notching Statíon Electronic back gauge is available
Unique design allows for unsurpassed cuttíng of angle and flat bar.
Ventilated guard for maximum operator visibility
Three gauging stops for precise postioning
Flat Bar shearing Statíon specially contoured anti-distortion blade for quality cuts.
Easíly adjustable hold down with good operator vísibílíty for accurate cutting. Lower blade has four cutting edges 
Large squaring arm with inlaid scale as standard
SHEARS + PUNCHERS
Large strong guarding for maximum safety
The angle iron shear has the ability to cut angle iron at 45 degrees both top and bottom leg for a picture frame corner
Round and square bar shear has multiple holes for a variety of sizes. Diamond shaped blade for quality cuts and no Adjustable hold down for clean square cuttíng. material loss with mínimal deformity.
Optional Channel and 1 beam shears available 45 degree miter cut both top and bottom leg for a picture frame corner.
Large heavy duty knobs.
Metering with large standard squaring arm
Precise square bar cutting.
PLATE ROLLS
SLIP ROLL SRG SERIES SLIP ROLL SRD SERIES
Optional stand Fuly assembled stand; With cone rolling function
Mode1 Max. Thickness mm Max. Width mm Dia of roll mm kg
MOTORISED ASYMMERIC PLATE ROLL
PLATE ROLLS
MANUAL PLATE ROLL WII SERIES with optional beading rolls
Easy adjustable support roll wíth scale
MOTORISED ASYMMETRIC PLATE ROLLS MRG SERIES
Gear reductíon motor driving
Foot switch control
PLATE ROLLS
MOTORISED PYRAMID PLATE ROLLS MPR SERIES
Optional side bending rolls for pipe and angle plate only for 3mm, 6mm and 8mm models
FEATURES:
steel welded frames
Motorised bottom drive rolls
Power up and down of top roll
Safety cut out wire for all models
MoЬі1e control panel + foot switch
Swing out end support enables complete cylinder to be removed
Minimum
Model Thickness mm Wídth mm Bending Top roll mm Bottom 
FORMING ROLLS
BEADING MACHINES
LH-8 MANUAL LH-10 MANUAL LX-15, LX-18 MOTORISED
Model Capacíty mm Motor kw kg
LOCK SEAMER SM-16 W1TH 7 FORMING STATION LOCK SEAMER SM-20 WITH 5 FORMING STATION 
 SHOWING WITH OPTIONAL POWER FLANGER 2 formìng positíon.
One position forms pittsburgh lock, Model SM-16 SM-20
One position forms right angle flange or other profíles as per customeŕ s request. Capacity
Shaft+pittsburg roll+gear is one-piece for good
Pocket Depth rigidity and good tolerance
All shafts and rolls are hardened Speed mm/min
All shafts are ground, and fitting with precision
Motor 3KW KW
needle type bearin
Powder-coated finishing  Height 1000mm 900mm
Heavy welded frame
 Heavy chain drive gear-reductìon motor
BAR BENDERS
Baг Bender UB-1, UB-2 Bar Bender UB-3, UB-4
Cold Bending steel Cold Bending steel UB-1 UB-3: UB-2 UB-4:
Baг Bender UB-6
The compact benders UB-5
Baг Bender UB-5
UB-6 allow you to economically  make a variety of bends in flat, square, or solid round bar. You may bend handles, tube clamps, anchor bolts and U-bolts, letters for sígn very easily.
Flat bar capacity up to 5/16 x 1-1 /4 , 1 /4 x 2.
Bending angle up to 200 .
Supplied with 7 round bending dies from 1 to 3, 1 square stop block, 1 sharp angle die and a work stop.
SECTION ROLLS
MOTORISED SECTION ROLL SR-30 MOTORISED SECTION ROLL SR-30A
wíth 6 sets rolls as standard Workíng horizontally or vertically 
Wíth 3 sets of rolls as standard; Maпy optional rolls

Model Flat Bar Square Baг Round Bar square Pipe Round Pipe Motor Net Weight
SR-30 :30 x 10mm 14 x 14mm 16mm 30 x 30 x 1 mm 30 x 1 mm KW 270kg
SR-30A 30 x 10mm 30 x 30mm 30mm 30 x 30 x 1 mm 30 x 1 mm KW 244kg
MOTORISED SECTION ROLL HYDRAULIC SECTION ROLL HYDRAULIC SECTION ROLL 
Model W24-400 W24Y-500 W24Y-1000
Max. bending size Angle Plate 40 x4mm 
Motor power
Net weight 500 900 2500
BENDING MACHINES
FLB-42 FLB-40SH; FLB-50SH
One-piece sharp nose b1ade Segmented high blade
MB1500; M62000; MB2500; MB3000 PB-42-3SH
One-piece sharp nose b1ade segmented high clamping b1ade, bed b1ade and bending blade
Capacíty
Model
BENDING MACHINES PB-48C; PB-80C; PB-100C; PB-120C; special designed top blade
Bendíng pans or boxes to 150mm depth PB-50A; PB-80A; PB-100A
Patented desígn of clamp beam for bendíng pans or boxes to 180mm depth; Max. open heíght 200mm
SEGMENTED and removable fingers on top clamping beam
EXCLUSIVE segmented and removable fingers on bottom and bending beam for turn down 50mm splashback etc.
opherical bearings for smooth ease of operation of the clamping mechanism
Model Wídth mm Thíckness mm Max. bending angle kg
BENDING MACHINES
Segmented clamping blade; segmented folding blade. segmented clamping blade, Segmented bed blade; Segmented folding blade.
Model Width mm Thickness mm Max. bending engle kg
BENDING MACHINES
MOTORISED FOLDING MACHINES
MFL2020; MFL2500; MFL3000 with one-píece sharp nose blade
MFS2020; MFS2500; MFS3000 wíth segmented clampíng blade
MFL2020 MFL2500 MFL3000
MFS2020 MFS2500 MFS3000
Folding 2020mm 2520 3020 length
Folding thickness
Clamping motor
Bending motor
HYDRAULIC FOLDING MACHINES HF-2000; HF2500
Manual clamping operation
Hydraulic operation of bending beam wiłh adjustable pre-set angle
Optional: segmented bed blades and bending blades; BENDING PANS 8 BOXES UP TO 180MM DEPTH;
Model Width mm Thíckness mm Max. bendíng angle Motor kg
HF-2000 2000 0-135 3KW 2000
HF-2500 2500 0-135 3KW 2500
BENDING MACHINES
HYDRAULIC SWING BEAM FOLDING MACHINE HSB-1300; HSB-2000; HSB-2500; HSB-3100
FEATURE:
HYDRAULIC CLAMPING; HYDRAULIC BENDING.
single angle programmable controller. 
Manual bending oг auto bending control mode.
AUTO mode: After the clamp beam fully clamps the workpiece, the bending beam will bend to preset angle and return. Then the clamp beam wìll unclamp the workpiece.
Clamping beam is pulse guarded for safety
Adjustable open height
With manual backgauge
Adjustable blade clearance for different thickness
OPTIONAL:
Multiple angle programmable controller
controİİeď backgauge wïth ball leadscrew
segmented bed blade and segmented bending blade
Model Width mm Thickness mm Max. bending angle Motor kg
QRESS BRAKES
HYDRAULIC PRESS BRAKES HPB SERIES
Mechanical Torsion Bar Sychronízation
Digital readout for backgauge and ramstroke Motorised backgauge with adjustable flngers Adjustable shut height
FEATURES:
Germany Rexroth hydraulic system or Italian Aron
lntegrated hydraulic system includìng rapid approach/slow speed
siemens/Telemecanicque electrical components
Motorised adjustment of ram stroke
Includìng front support + movable foot control switch
Guarding + light beam as shown in photo are opłional
Standard 86 top tool + wedge clamp adjustment Different kind of top tool + bottom dies for your choice
Standard multi-vee bottom die
PRESS BRAKES OPTIONAL
Manual bottom die crowing with counter Quick action wedge clamp segmented bottom die with holder
E200 CE approved 2 axís NC system
with frequency-inverter control Delem DA41 0г DA51 Ball screw backgauge with linear guideway CNC system with servo control
Model HPB-60 HPB-60L HPB-100 HPB-125 HPB-125L HPB-160 HPB-160L HPB-200 
PRESS BRAKES
CNC PRESS BRAKES PSH SERIES
Electrical-Hydraulic sychronization
CNC machining of MONOLITHIC frame guarantee repeat accuracy
FEATURES: PLEASE REFER TO SPECIFICATIONS OF HPB PRESS BRAKE 3 axis Y1-Y2-X CNC controlled as standard
Additional axis available R1, R2, Z1, Z2 0г crowning axis Swiss CYBELEC DNC600 system
REXROTH/BOSCH or HORBIGER hydraulic proportional system 
Independent Italian GIVI light encored-gauge
High efficiency AC servo motor and driver from Japan
Back Gauge includes ball screw and linear way European or Chinese high efficiency meshing gear pump
Ball screw and linear guide way
OPTIONS:
CYBELEC DNC60S system
CYBELEC DNC880S system 2D graphic programming, MS-DOS
CYBELEC MODEVAIOS system 2D graphic programming; Windows
CYBELEC MODEVAI2S system 3D graphic programming; Windows
DELEM DA65W 2D graphic programming; Windows; LCD
DELEM DA66W 2D graphic programming; Windows: 12 LCD
DELEM DA69W 3D graphic programming; Windows: 12 LCD