Akira-seiki V4 vertIcal machining center

Akira seiki V4 vertical machining center
Reinforced Frame Construction
lnternal ribs of each keycasting elements are enforced for deformation-resistant and anti-damping vibration

Golden Triangular Frame in optimum span of bed base and guide ways
supports the superior acceleration and deceleration movement.

Scientific Technology Support
Digital FEA (Finite Element Analysis) scientifically demonstrates rigid structureand approves excellent dynamic accuracy and vibration absorb by advanced digital assay tool.
A Rigid Column
Optimum span steady base with A-type large box way column design, Z-axis employs robust slìde way and spindle head cartridge for powerful pocketing and fast milling.
Head Stock Thermal Control
Technology of coolant circulated inside the casting headstock to maintain the constant temperature to prevent deformation which generated by spindle during cutting.

Double-anchored ballscrew
Enhance high speed cutting rigidity and 100% laser track and ball bar
collaboration test to ensure geometry accuracy.

Most recommend heavy load linear guide way (THK NR type)
Least friction coefficient and preloading for clearance-free between moving surface, precise ball linear guide ways are most compatible for fast movement and high positioning and repeatability accuracy.

lnherit high speed machining conception, Akira Seiki V/SV series is capable of high speed heavy cutting by employing high output spindle motor with max 42HP/117.3 N-m
12k/15k rpm spindle which can reduce machining time dramatically

AKIRA M~ 745 Control High Achievement And Easy Operatíon For Machining Efficiency
• Powerful 64bit CPU incorporate the fastest-ever computation processions and program scanning.
• Full look ahead up to 500 blocks and High Speed and High Accuracy Control allow contouring rapid and smoother motion.
• 5120M (2MB) initiaI program memory is available as the largest industrial NC program stored capability (option)
• Full Graphic Function including simulate run, tool path check and graphic scaling the same coordinate.
• 3 M-codes in the same line achieve least code-code pause for operation efficiency.
• T-code and M-code in the same line is readable such as M6TX, TXM6 or TX M6.
• Simple to correct 3 level alarm condition within same page, no inconvenience of forth and back viewing.
• Program Reserver available to adapt flash memory card & Ethernet connection.
• High compatibility to Fanuc control programming.
• One-Button Features ease the often used functions instead of multi-steps procedure. Only by one-button commend to complete