Ar italia accessories for forming machine

Ar italia 

accessories for forming machine AR 2005 ACCESSORY FOR RINGS The accessory for rings allows the shaping of iron bars into circular or oval forms optional. The roller kit supplied allows the working of diameters from 25 mm to 200 mm.

Curve diameters: Rod bending accessory The rod-bending accessory is essential for all work where the bending of iron bars is required plate - square - round. The millimetric adjusting screw and the quick-release lever of the piece contribute to speeding up the processing.

Working capacity: 

Jointed volutes for forming machines AR 2005 YOU DECIDE THE SHAPE Our patented system allows adjusting the curve radius to obtain the desired shape.

Jointed volutes for forming machines AR 2005 YOU DECIDE THE SHAPE Our patented system allows adjusting the curve radius to obtain the desired shape.

Jointed volutes for forming machines FOR MACHINED BARS FOR ROUGH BARS VSP 

Accessories for forming machines AR 2005 Working capacity: square Ø 8 - plate 8 x 50 square Ø 10 - plate 10 x 50 square Ø 12 - plate 12 x 50 square Ø 15 - plate 15 x 50 square/square: 16 / 18 / 20 / 25

Accessory for tapering The high power and ease of use allow this accessory to twist iron bars according to the operator's needs, creating ornamental motifs of great aesthetic taste, such as pine cones, spirals, etc. The machine is controlled digitally, and you can set the desired number of turns, and by using the movable zero, you can achieve the spring effect of the material in processing.

Working capacity: square Ø 25 - plate 50 x 15

Accessory for tapering The accessory for tapering allows the reduction of thickness of the iron bars, reducing working times to a minimum, about 3 seconds per revolution.

ONLY FOR AR 10/S Working capacity: square Ø 20 - plate 30 x 15

Tube bender accessory The tube bender accessory allows bending iron, copper tubes, etc at the desired angle. Matrices for tubes up to Ø 33 can be fitted on AR 10, and matrices up to Ø 48 can be fitted on AR 10/S, using a special tailstock. The matrices have a radius of 3 times the tube's section if in inches, and 4 times if metric.

AR 10 tubo tube 

ACCESSORY FOR RINGS ON SQUARE AND ROUND FLAT IRON The accessory allows the manufacturing of rings with sundry diameters with edges ready for welding. The peculiarity of this accessory is that the finished ring is manufactured in a single step and that rings can also be manufactured with flat iron bars