AWEA MVP 5-face machining center

AWEA MVP series
Moving Cross Rail Bridge Type 5-Face Machining Center
W-axis travel 1,250 mm New Frontier for Cutting Rigidity and Working Range

MOVING CROSS RAIL
BRIDGE TYPE 5-FACE MACHINING CENTER
Based on AWEA s mature manufacture ability and innovative technology, MVP series moving cross rail bridge type 5-face machining center provides long W-axis travel 1,250 mm, automatic vertical/horizontal tool changing system, complete milling heads and automatic head changing system to promote MVP series as an integration of heavy cutting, high efficiency and high reliability advanced bridge type 5-face machining center, which can easily achieve your various machining needs today and the future.

X-axis can be equipped rack and pinion design with high resolution
linear scale, and driven by electronic backlash reduction dual servo motors which can eliminate backlash to provide excellent dynamic accuracy for large machines. Opt.

W-axis
without W-axis Rigidity of head is decreasing while stretching out more on Z-axis. Using W-axis can reduce overhang on Z-axis to remain the rigidity of head and is suitable for heavy cutting.

Z-axis ball screw
Centro-Symmetric Spindle System Unique head design allows the spindle, spindle motor, ball screw and dual hydraulic counter Twin hydraulic weight cylinders to be symmetrically placed. cylinders for counter-balance Z-axis linear guide way Hereby preventing thermal distortion and Center line of spindle minimizing deflection. Assuring accucacy and Center of spindle motor heavy-duty cutting capability.
Centro-symmetric Main Spindle System

Linear guide ways
Powerful Cutting Capability lnner-rail embraced structure provides high rigidity and good stress flow which minimizes over hang and vibration issues. The Y-axis roller type linear guide ways offset from each other,
increases structural rigidity and reduces distance between. Spindle to cross beam which enhances overall cutting performance. Y-axis sectional roller type guide ways design.