Bode vp cradle positioners

BODE

CRADLE TYPE POSITIONERS
Model VP/160
Capacity 160 tonnes at 1,000 mm and 350 mm ecc. Capable of handling workpieces mm in diameter.
Typ VP/C.160
Tragkraft 160 Tonnen bei mm

Model VP/C.2
Capacity 2 tons at 300 mm and 150 eccentrícity.
Single-speed table rotation. Tiltíng through 360 degrees.
Type VP/C160

Typ VP/C.2                                                                                          

BODE Model  VP/C.220
220 tonnes capacity at mm and 350 mm ecc.
Capacity table in horizontal position 450 tonnes.
BO Machine designed to handle workpieces up to mm diameter.
An important feature is the facility to pass a boom with welding head through each of the pedestal

B01 bearings supporting the crosshead for internal cladding of stubs attached to a hemispherical head.


Typ VP/C.220
Two-speed table rotation.
Table rotatíon and table tílting through invertor controller.
Model Vp/
Load capacity
kgs. at mm
and 250 mm ecc.
Tabe and cruciform arms designed to carry workpíeces mm in diameter.
Model VP/C.40
Load capacity 40.000 kgs. at 400 mm
c.o.g. and 120 mm ecc.
Machíne designed to rotate workpíeces having a maximum diameter of 4.000 mm.
lnterchangeable wear plates 50 mm thick fítted to table and cruciform arms.
Tilting + 135 degrees from horízontal forwards and - 60 degrees from horizontal backwards.
Two-speed table rotatíon.
Table rotation and table tílting through invertor controller.
Model Vp/C.75
Load capacity 75.000
kgs. at 1.000 mm c.o.g.
and 250 mm ecc.
Table and crucíform arms desígned to carry
workpieces 6.000 m in diameter.
lnterchangeable wear plates 50 mm thíck fitted to table and cruciform arms.
Tiltíng + 135 degrees from horízontal forwards and - 60 degrees from horizontal backwards.
Two-speed table rotation.
Table rotatíon and table tilting through inverter controller.