Boldrini metalworkings machines

BOLDRINI

BOLDRINI Company
Since it was established in 1939, BOLDRINI Company has always taken special care in materials and components to produce reliable machines. Thus, reaching the point of a valid binomial: SIMPLE MANUFACTURE / QUALITY and therefore long life which, for all our machines, is over 30 years.

Since 1985, BOLDRINI Company enlarged its range of production, having taken over VERRINA, Genoa. Our production has a wide range of users, from the craftsman to the petrochemical and nuclear fields. Meeting the market needs, equipment has been fitted on our various types of machines.

Constantly looking for a SUPERIOR QUALITY, we keep on selecting our suppliers. In this way, we have higher quality control and a quicker action in the technical service.

Our Production Range

3/4 Roll Plate Bending Rolls

Cold or hot capacities up to 250 mm thickness.

Shipyard Plate Bending Rolls

Up to 13 m plate width, thickness up to 80 mm.

Shipyard Frame Benders

Universal Section Bending Rolls

For angles, flats, beams, channels, pipes, etc.

Beam Benders for Tunnel Construction

Plate Straightening Machines

Up to 4500 x 80 mm.

1, 2, or 3 Head Plate Edge Milling Machines

Fixed or swiveling head up to 250 mm plate thickness.

Hydraulic Presses

Portal and C-frames, 4-column, also for deep drawing, up to 5000 tons.

Automatic Manipulators

To form crowned blanks, to be fitted to our hydraulic presses and others if existing.

Cold Head Flanging Machines

Up to 50 mm thickness.

Hot Head ROTEX Spinning Equipment

To produce heads starting from flat blanks up to 250 mm thickness and diameter up to 6000 mm.

Complete Installations

To produce tanks, stationary or for railway and road transport.

Combined Shearing Flanging Machines

For elliptical, multicenter, and oval shape heads for truck and trailer tanks up to 5-8 mm depending on material quality thickness.

Automatic Hydroforming Units

For dishing of multicenter and round blanks for tanks.

Fully Hydraulic Cold Flanging Machine, Model R1B0

For heads with 

and without center hole, thickness up to 50 mm, diameter up to 8000 mm.

Section Bending Rolls, Model BSA 50

Fully hydraulic, all shafts on roller bearings, hydraulic 6-way side adjustable guide rollers.

Capacity up to 250 x 250 mm angles, 250 x 100 mm flats hard way, 400 mm I-beams hard way, 300 mm wide flange shapes hard way.

Fully Hydraulic Plate Bending Rolls

Capacity 4000 x 150 mm.

1000 Tons Dishing Press

With 10100 mm distance between columns, equipped with a 27 tons lifting capacity automatic manipulator, both units controlled by playback CNC and 50 mm flanging machine for heads with center hole up to 8000 mm elliptical shape.