Brigeport V 480 APC VMC vertical machining center

BRIDGEPORT V480 APC   HARDINGE Vertical Machining Center
DIMENSIONS

SPINDLE OUT DIAGRAM
TORQUE Power POWER TORQUE Power POWER
N-m Torque kW N-m Torque kW
Spindle Speed rpm Spindle Speed rpm

FANUC ALPHA 3/10000i SPINDLE MOTOR FANUC ALPHA 2/15000i SPINDLE MOTOR
Coolant Tank Capacity 120 liters
Spindle Center to Column 1 liter/min Chip Flush Rate 40 min
Taper Size No. 40 No. 30

Motor Rating Max. 10 hp / kW Compressed Air Requirement Min. 70 psi, 5 kg/cm²
Speed Max. 10000 Belt 15000 Direct rpm Power Supply Requirement 64A FLA / 220V / 3 Phase
Torque Max. N-m
Tapping Speed Max. 3000 6000 rpm Model V480 APC
Spindle Nose to Table Surface 225-655 mm

Diameter 32 mm Table Length 600 mm
Table Width 400 mm
Rapid and Traverse Rates Max. 36 48 m/min Table Max. Load Each Table 200 kg
Cutting Feed Rates Max. 12 15 m/min
Table Tap Holes Mx x Nos. M12 x 35

APC Change Time 8-10 sec
Tool Capacity 20 Swing Arm 180 Clockwise or Counter
APC Change Type 2 Tables
Tool Selection Bi-Directional Clockwise
BT or CAT or BT or CAT Clamping Force 2200 kg 35 kg/cm²
Tool Holder Type SK or ANSI 40 SK or ANSI 40 Max Part Height 400 mm

Tool Diameter Max. 75 Full 150 Adj Pockets Empty Coolant Through Spindle 280 psi 20 bar
Tool Length Max. 185 mm Chip Flush System
Tool Weight Max. 7.4 kg 4th Axis Rotary Tables
Tool Change Time Avg. C-C sec Ship Wash Down Hose
Coolant Tank Capacity 170 liters

Positioning All Axes ±1 mm 12000 rpm Direct Drive Spindle Taper 40 - Fanuc Siemens
Repeatability ±mm 20000 rpm Direct Drive Spindle Taper 30 - Fanuc Siemens
24000 rpm Direct Drive Spindle Taper 30 - Siemens

Axis Motor Rating X, Y 3 Z kW Chip Conveyor Auger Type
Coolant Flush Motor kW Siemens 828D Controller 31A FLA / 400V / 3 Phase
Linear Scales
Spindle Bearing Grease Spindle Oil Chiller
Linear Guideways Grease Tool Probe / Pre-Wiring
Ball Screw Grease Part Probe / Pre-Wiring

To keep improvements and developing new functions, Hardinge Taiwan reserves the right to change specifications without further notice.
Due to varying cutting conditions, actual results may be greater or less than those listed.

HARDINGE CORPORATION

Hardinge Worldwide
Hardinge is a leading international provider of advanced metal-cutting solutions. We provide a full spectrum of highly reliable CNC turning, milling, and grinding machines as well as technologically advanced work-holding accessories.

Headquarters
Hardinge Corporate
1235 Westlakes Drive Suite 410 Berwyn, PA 19312
Phone: 800-843-8801

International Locations

Americas
One Hardinge Drive, Elmira, NY 14903

Asia
Shanghai Co. Ltd.
1388 East Kangqiao Road, Pudong, Shanghai 201319

Hardinge Taiwan Precision Machinery Limited
4 Tau Chiang 3rd Road, Taiwan

Europe
Hardinge GmbH
Fichtenhain A 13c, 47807 Krefeld, Germany

Kellenberger Heiligkreuzstrasse 28, CH 9008 St. Gallen, Switzerland

Hardinge Ltd.
Europark, Unit 4 Watling Street, Rugby CV23 0AL, England

Additional Offices

Jones & Shipman SARL
8 Allee des Ginkgos, BP 112-69672, Bron Cedex, France

Hardinge Inc. 08/19