Cinch mill 25 Bed type milling machine

CINCH-MILL BED TYPE MILLING MACHINE
CINCH-MIll 25 pictured with optional accessoríes.

MACHINES DESlGNED .
FOR GREA T MILLING PE
MANUAL MODEL
ONE-PIECE rigid bed casting, EXTREIVlELY wide square ways, FULLY supported saddle rigid work head ensures EXCELLENT HEAVY CUTTING.
/ 3 AXES AUTO FEED. / 2 AXES simultanious feed, INVERTER OPERATED
spindle speeds equipped with ball screws.
CINCH-MILL 25M
Hurdened qround square ways with turcite finish./ Automatic lubrication system.
CINCH-MILL 20M  MACHINE FRAME ONE-PIECE rigid bed casting, EXTREMELY WIDE square ways, FULLY supported saddle rigid work head ensures EXCELLENT HEAVY CUTTING.

INVERTER OPERATED variable speeds  
OEM CINCH-MILL 25  
BALL SCREWS with P5 bearings  
HARDENED GROUND slideways on all axes  
top surface of TABLE  
TURCITE B on X and Y axis  
Automatic lubrication system  
Coolant system  
Halogen Lamp  
Slideway covers YZ  
OEM CINCH-MILL 20  

SIMULTANEOUS CONTROLLABLE : X,Y,AND Z-AXES  
3 AXES SIMULTANEOUS CONTROL SYSTEM  
INTERPOLATION: LINEAR FOR 3D, CIRCULAR FOR 2D  
LINEAR, CIRCULAR INTERPOLATION LINEAR FOR 3D  
COORDINATE SYSTEM: ABSOLUTE AND INCREMENTAL  
ABSOLUTE / INCREMENTAL SETTING AND PROGRAMMING  
CARTESIAN AND POLAR COORDINATES FOR DRILLING  
X,Y,Z, MOVE FOR RAPID TRAVEL  
JOG x1,x5,x20  
HANDWHEEL 1uM,5uM,10uM,20uM  
COORDINATE SETTING FULL FLOATING ZERO  
1/2 COORDINATE SETTING FOR X AND Y AXES  
AUTO CORNER AND ANGLE POSITIONING  
CARTESIAN AND POLAR COORDINATE SIMULTANEOUS FOR DRILLING  
DRILL, PECK DRILL, CHIP BREAK DRILLING  
POCKET FOR ISLAND AVOIDANCE FOR POCKETING  
ROTATING OF COORDINATE SYSTEM  
MIRROR IMAGE FOR X OR Y AXES  
LINEAR ARRAY  
AUTO ZERO RETURN  
TOOL DIAMETER COMPENSATION: RIGHT OR LEFT  
CONTINUOUS TOOL PATH DISPLAY  
SIMULATION TOOL PATH DISPLAY  
FEEDRATE PROGRAMMING 0-999 MM/MIN  
FEEDRATE OVERRIDE 10% - 150%  
TRAVEL LEAD ERROR COMPENSATION  
ALARM DISPLAY  
SERVO & SPINDLE OFF FOR ALARM  
PLANE MACHINING SELECTION  
NO PAUSE MACHINING  
DWELL FOR DRILLING  
RIGID TAPPING  
BORING  
RS-232 INTERFACE  

TECHNICAL DATA  
MODEL CINCH-MILL 18 CINCH-MILL 20 CINCH-MILL 25  
Table surface Standard- 254x1270mm 10x50 305x1370mm 12x54 343x1524mm  
Optional- 305x1270mm 12x50 343x1524mm 395x1700mm  
Table travel X-axis 850mm 33 1050mm 41 1300mm 51  
Saddle travel Y-axis 480mm 18 500mm 19 550mm 21  
Vertical head travel 480mm 18 530mm 20 550mm 21  
Rapid travel axes 7000mm/min 7000mm/min 7000mm/min  
T-slots width x number 3x16mm 3x16mm 3x16mm  
Square head/ Spindle head  
Quill head Quill head/MP head Quill head/MP head  
Taper of spindle nose NT 40 NT 40 NT 40  
Spindle speeds Sensorless Vector operated Sensorless Vector operated Sensorless Vector operated  
Variable 70-3600rpm Variable 70-3600rpm Variable 70-3600rpm  
Distance from spindle to column surface 480mm 480mm 480mm  
Distance from spindle to table 0-650mm 0-680mm 0-680mm  
Spindle motor 5HP 5HP 5HP  
Net weight Approx. 1800 Kgs 4000lbs 2000 Kgs 4400lbs 2500 Kgs 5500lbs  
Gross weight Approx. 2100 Kgs 4400lbs 2300 Kgs 5060lbs 2800 Kgs 6160lbs  
Packing size LxWxH 168x81x66 186x86.6x75  
Quill head and MP head are optional  

CINCH CNC:  
Easy to study: Programming with Graphic Input, without G or M code.  
Easy to operate: Push Buttons for complex graphic input.  
Machining capacity: DRILLING normal, peck drilling, and chip break drilling.  
CONTOURING cutter compensation, rough, finish, forward and reverse machining.  
POCKETING island avoidance, roughing, finishing, forward and reverse machining.  
BORING automatic boring and avoid return mark.  
TAPPING normal tapping and peck tapping.  
Manual function: XYZ coordinate setting, X and Y coordinates can be set for middle and rapid traverse. Easy positioning jog and MPG manipulation via REMOTE CONTROL BOX.  
External programming: Easily load 3D CAM generated files from a high density floppy disk or via the RS-232 interface.  
Other features: scaling, rotating, mirror, linear array, VGA 14 CRT display.  
PC-TECHNOLOGY-BASED  
CINCH CNC:  
Memory capacity Byte HDD, Byte  
Floppy disk driver FDD and 8M Byte RAM can be extended to 16M Byte RAM, option.  
REMOTE CONTROL BOX  
Powerful manual operation. Simple positioning and machining.  

DIGITAL SERVO DRIVER:  
High efficiency, low noise:  
PWM O/P circuit with IGBT or MOSFET transistor.  
Protective functions:  
CINCH has been equipped with protective functions such as driver short circuit, open voltage over current, overspeed and over travel, etc.

DIGITAL SERVO MOTOR:
Capacíty: 1 KW Hi-performace output.
High torque: High output torque.
Híght effícíency: Hí-voltage, Low-current. AC motor
Hígh response: Digital closed loop.

PC-TECHNOLOGY-BA
ENG INEERED CINCH-MILL series CNC Milling machines are designed specifically
for SMALL BATCH MACHINING , MOULDMAKING, TOOLROOMS ,   MAINTENANCE FACiLiTIES. Operation and program input are vastly simplified through the advanced use of Graphic lnput.
Cost-Effective:
The complete package including Controller, Digital Servo Motors 3 axes , Digital Servo Drivers, 14 colour CRT , Remote Control Міl Box and ballscrews plus training, costs only slightly more than a milling machine fitted with DRO and power feed.
Versatíle:
CINCH-MILL can easily handle mony different kinds of jobs.
Without the need for complex programming.
Easy to Study:
Spindle quill travel CNT-803 CNC uses graphic input programming plus machinist s
language,no G or M codes. accuracy mm/127 mm

CNT-806 CNC is our advanced model which allows you to upgrade the features of machine to be added ATC or 4th axis function. 

Easy to Operate:  
CINCH-MILL requires no CNC experience. Anyone can immediately begin to operate the system to produce simple or complex parts within a few hours.  
Spindle runout  
Parallels of table movement and HANDLE manual movement.  
X-axis  
Y-axis  
POCKET tool path simulation.  
Squareness of Z-axis movement spindle  
3D CAM tool path simulation.  

STANDARD Accessories  
OPTIONAL Accessories  
Air power draw bar 1 set  
Larger work table  
Tool kit 1 set  
Y-axis rear telescopic steel covers  
Swarf tray 1 set  
Instruction manual 1 set  
Table guard 1 set  
One-piece rigid machining center  
Halogen lamp  
HP powerful spindle motor with sensorless vector control  
Floppy disk drive and RS-232  
Electric Cabinet  
Rear splash guard  
Control box for:  
Coolant  
Spindle speed  
RPM Meter  
Ball screw covers  
Table surface hardened and ground  
Telescopic steel covers for Y-axis front  
Powerful CNT-806 PC-Based control  
Rear telescopic steel cover is optional  
Swarf tray  
Rigid bed  
CINCH-MILL 25 pictured with optional accessories  
Exclusive agency member of the DORMAC