Costa M36 Deburring Polishing universal machines

UNIVERSAL DEBURRING PoLlSHING MACHlNES

PREIVIERE PER EMERGENZA STOP USA 
Seríes M36 - Standard-Еeatures

Sanding Belt Tracking

Photocell controlled.

Variable feed speed from 3 to 15 m/min, inverter controlled.

Cylinder unit equipped with 4-position grit-set selector, revolver-type, for easily switching abrasive grit sequence, pneumatically activated.

The XVS unit is completely extractable for quick and easy change of the brush tools. The XVS utilizes readily available, low-cost brushes as well as more specific brush tools with different materials and diameters for special utilization.

Double Pressure Rollers

With micrometric precision adjustment mounted in the front and rear of each working unit.

Intuitive Control Panel

Equipped with high-quality components from primary brands.

Diagnostic LED signals for faults and emergencies.

Electric plant CE certified, with coded connections and electrical diagrams provided in the instruction book.

Auto-Set

Automatic thickness measurement at machine infeed.

An electro-pneumatic feeler is lowered onto the panel to be processed; it senses the thickness of the workpiece, and the machine will only proceed once the operator approves it.

Infeed and Outfeed

Table extensions ease the loading/unloading of workpieces.

Each working unit motor is equipped with a disc brake, allowing the machine to stop in a few seconds in case of emergency.

Vacuum-Driven Hold-Down System

Ideal for processing small, slippery workpieces.

Requires a connection to an adequately sized dust extraction system.

Examples of Working Cycles on Machines Equipped with 2 Working Units:

Deburring cycle for oxy-flame and plasma cut pieces with M36 CC.

Deburring cycle for laser cut pieces with M36 Cs.

Polishing cycle for cold rolled stainless steel with M36 CCC+Sb.

Deburring + polishing cycle for laser cut pieces with M36 CCS+Sb.

Deburring cycle for punched pieces with M36 CSS+Sb.

Technical Data:

Working Width: 1150 mm

Working Thickness (Min/Max): 0.8 - 150 mm

Feed Speed: 3-18 m/min

Feed Motor: 1.1 kW

Sanding Belt Dimensions: 2200 x 1180 mm

Compressed Air Requirement: 25-50 bar/min (varies by model)

Air Volume Required: 3050-4510 m³/h (varies by model)

Gross Weight: 1100-2300 kg (varies by model)

Deburring + Polishing Machines with 2 Working Units:

1 hard rubber cylinder, 2 soft rubber cylinders.

1 hard rubber cylinder, 2 stainless steel or Scotch-Brite™ brushes.

1 hard rubber cylinder, 2 multifunction units with vertical brushes.

Deburring + Polishing Machines with 3 Working Units:

1 hard rubber cylinder, 2 medium soft rubber cylinders, 3 soft rubber cylinders.

1 hard rubber cylinder, 2 medium soft rubber cylinders, 3 stainless steel or Scotch-Brite™ brushes.

1 hard rubber cylinder, 2 medium soft rubber cylinders, 3 stainless steel or Scotch-Brite™ brushes.