Dahlih 1500 Milling machine

DAHLIH 1500 MILLING MACHINE

IASSA QUALITY CONTROL APPROVED BY
OUR GOVERNMENT 15 GUARANTEED FOR EACH MILL.

1500 SERIES MILLING MACHINE
DL-H 1500
HORIZONTAL-VERTICAL
MILLING MACHINE
DL-GH1500
HORIZONTAL-VERTICAL
TURRET MILLING MACHINE

The new 1500 series GH 1500 H1500 End Milling on GH 1500 Turret Head are robust, versatile milling machines. Backed by our 20 years of experience in building milling machines, the up-to-date design and manufacturing by top-grade equipment, the 1500 series offer the best combination of versatility, precision, and reliability.

FEATURES

Horizontal Spindle
Wide speed range: 55-1220 RPM
Spindle, spline shafts, and gears are made of Cr-Mo Alloy steel, hardened and precision ground. Gears are Reishauer ground. Face Milling on H1500 Vertical Attachment series on spindle gear.

Turret Head GH1500
2HP motor
Quill travel 100 mm
8 steps spindle speeds up to 3150 RPM
90° swivels R/L

Vertical Head H1500
The robust vertical head can transmit the full horsepower from the horizontal spindle. Also 90° swivels R/L

Large diameter feedscrews – 30mm of longitudinal, 25mm of cross, 35mm of vertical.

The precise ground slideways between knee column and saddle provide rigid support through square gibbed ways.

Extra long saddle – fully supporting massive easy operating rotary dial type feed table – Minimises deflection.

Power feed gearbox gives 12 longitudinal feeds, 22-450 mm/min combined with 2160 mm/min rapid traverse 60Hz.

Very large microdials – 85mm diameter, 1mm of each division, incorporating thumb screw safety lock.

Backlash eliminator is fitted as standard.

Lubrication to the table, the saddle, and the knee slides – One-shot system.

All switches are equipped with electric-magnetic contact and overload relay, protecting the machine from overload.

MODEL
DL-GH 1500
Working surface: 230x1050 mm
Longitudinal travel: 650 mm
Cross travel: 250 mm
Vertical travel: 450 mm
T Slots Size & Distance: 14x3x50 mm
Longitudinal feeds: 12 steps 22-450 mm/min
Rapid longitudinal traverse: 2160 mm/min
Spindle speeds: 8 steps 250-3150 RPM
Quill travel: 100 mm
Taper of spindle nose: 40
Swivelling angle L/R: 90
Swivelling angle of overarm: 360
Overarm travel: 450 mm
Distance from spindle nose to table top: 70-520 mm
Distance from spindle center to column surface: 80-520 mm
Horizontal spindle motor: 2HP-4P
Vertical spindle motor: 2HP-4P/1HP-8P
Longitudinal feed motor: 1HP-4P
Coolant pump: 1P-2P

DL-H 1500
Working surface: 230x1050 mm
Longitudinal travel: 650 mm
Cross travel: 250 mm
Vertical travel: 450 mm
T Slots Size & Distance: 14x3x50 mm
Longitudinal feeds: 22-450 mm/min
Rapid longitudinal traverse: 2160 mm/min
Spindle speeds: 6 steps 55-1220 RPM
Quill travel: 100 mm
Taper of spindle nose: 40
Swivelling angle L/R: 90
Swivelling angle of overarm: 360
Overarm travel: 450 mm
Distance from spindle nose to table top: 0-370 mm
Distance from spindle center to column surface: 250 mm
Horizontal spindle motor: 2HP-4P
Vertical spindle motor: 2HP-4P/1HP-8P
Longitudinal feed motor: 1HP-4P/2HP-8P
Coolant pump: 1P-2PNet weight: 1500 kgs / 3300 lbs
Gross weight: 1800 kgs / 3960 lbs
Packing volume: 1560x1300x1920 mmImportant equipment set: 1 set
Tool Box: 1 pc

Dividing Head BS 2 2 10

Circular Table 6

Swivel Milling Vise

Face Milling Cutter

Face Cutter Arbor

End Mill Collets

SERIES MILLING MACHINE
Turret Swivelling to Vertical Attachment of H1500
Horizontal Milling
Position of GH1500