Dahlih 2100/2600 Milling machine

The Latest and Best Quality Machínery.
DAHLIH VERTICAL MACHINING CENTER MCV-2100/2600
Eхtra Bíg Capacíty,-Precísíon and Your Rígorous Productíon

MCV-2100 VERTICAL MACHINING CENTER

Whether your requirements are for big mold or large parts machining, the Dah Lih MCV-2100 and 2600 series vertical machining centers are an excellent choice. Their outstanding features make machining efficient, precise, and easy. Large capacity is achieved through the increased X, Y, and Z-axes travel. Powerful spindle drive allows heavy-duty machining with ease. Two-step gear transmission for the spindle produces the torque output you need. Heavy-duty construction throughout ensures optimum structural rigidity and accuracy. Plus, Dah Lih's tradition of maximum quality and dependability. These are just a few reasons why Dah Lih’s MCV-2100 and 2600 fully satisfy the rigorous requirements for big mold machining, aerospace parts machining, and large parts machining.

Strength, High Rigidity, and Perfect Accuracy at All Times.
The Latest and Best Quality Machinery.

VERTICAL MACHINING CENTER

Dah Lih’s Cutting Edge Technology
The Dah Lih MCV 1450 Vertical Machining Center is a rugged and high-precision machine with unmatched value. It is the most popular machining center on the market today. Ideal applications include precision mold and die making, middle-sized parts machining, and automotive and motorcycle parts machining.
Its outstanding value results from the fact that it offers many features as you have come to expect. It is ruggedly constructed throughout for optimum structural rigidity and accuracy. Four box ways on the base provide extra firm support for heavy loads. The nitrogen gas counter-balancing system assures extremely stable motion. Cutting feed rate is up to 10,000 mm/min for increased efficiency.

Vertical Machining Center
Precision and Efficient Machining

Strength, High Rigidity, and Perfect Accuracy at All Times.

Massive Constructed Design for Lifetime Accuracy
Major machine parts are manufactured from rigid cast iron for maximum structural stability. Double wall box-type structure for column, bed, and saddle. Scientifically rib-reinforced for added rigidity while reducing thermal strain to a minimum.
Four box ways on the base assure solid support for heavy loads. Symmetric and well counter-balanced design on the column assures precision machining. Pre-tensioned ball screws on the 3 axes reduce thermal growth.

EXCELLENT PERFORMANCE SPINDLE
High torque and performance are achieved from the two-step low and high gear spindle.
Accuracy is assured at both high and low speeds.

PRECISE CUTTING HEADSTOCK
Spindle through can be equipped with a coolant device, which is ideal for deep hole drilling.
Easy chip removal.
The specially designed spindle is adaptable to all speeds and requirements.
Spindle bearing life is extended through the floating design of the tool unclamp unit.
Superior rigidity is achieved through the box-type construction of the headstock.
The specially designed longer spindle makes using smaller tools much easier.

RUGGED CONSTRUCTION
The machine structure is designed and analyzed by advanced Finite Element Analysis to achieve the highest stability and rigidity, high-speed travel, and lightweight.
Ball screws are pre-tensioned to reduce thermal deformation to a minimum.
Base, saddle, and column structures are reinforced by V-shaped ribs with shortened stress lines. This fully eliminates rib deformation while assuring maximum rigidity of the machine.
Saddle is supported four ways featuring uniform load distribution and minimum deformation.

EXCELLENT TECHNOLOGY AND OUTSTANDING PRODUCT
LATEST ADVANCED CNC CONTROLLER
Equipped with Fanuc, Heidenhain, and other CNC controllers.

HYDRAULIC TYPE ATC
The double tool change arms, combined with special hydraulically operated ATC, enable simultaneous camp motions. These features enormously shorten tool change time while upgrading the reliability of tool changing.
The magazine is located at the side of the machine to avoid interference against workpieces and to keep tools clean.

NITROGEN GAS COUNTER-BALANCE
The newly designed nitrogen gas counter-balancing system employs an accumulator that does not require additional power.
No hydraulic power unit is required, no noise, extremely stable motion, no resonance, and greatly upgrades machining efficiency.
Easy to adjust servo parameters.

HEAT EXCHANGER FOR CONTROL CABINET
The high-performance heat exchanger ensures a constant temperature inside the control cabinet.
It provides protection for electronic components, the controller, and the motor driver.

WORK LIGHT
Two quartz work lights provide lighting for the working area.
They feature soft illumination, preventing the spindle from getting too hot without being irritating to the operator's eyes.

COOLANT TOOL KNOCKING DEVICE AROUND
The tool knocking device with a coolant system ensures efficient cooling and easy chip removal during machining.

SPINDLE

The floating design features coolant jets that provide a buffering function which not only effectively avoids damage to the spindle and bearings but also helps remove heat during tool release. This extends the service life of the spindle. The tool knocking motion is actuated by an air cylinder for efficient tool release, ensuring high cutting accuracy.

AUGER

During machining, chips are flushed and fall down to the chip auger, which delivers them to the chip conveyor. It efficiently removes chips to eliminate the effect of chip heat and keeps the work area clean at all times.

Rigid, Precise Spindle

8,000 RPM Precision Spindle Especially Designed

DIRECT-DRIVE SPINDLE POWER
The two-speed ranges for the spindle transmission system provide full power output and high torque at low speeds, allowing for heavy-duty machining. The high-speed range fully meets high-speed machining requirements. The satellite gear drive design minimizes backlash while ensuring extremely smooth running at high speeds.

The spindle runs on ceramic bearings to reduce spindle thermal deformation to a minimum.

SPINDLE SPEEDS

Low Speed
Continuous rating: 416 RPM
Torque: 90 kgf·m
Power: 22 HP

High Speed
Continuous rating: 8,687 RPM
Torque: 45 kgf·m
Power: 20 HP

More Powerful and Efficient Operations with Extra Optional Accessories

Rotary Table with 4th Axis Connector

Coolant Wash

Automatic Tool Length Measuring Device

Fast CAM ATC

Coolant Through Tool

Air Gun