Demmeler DLCT 4000 Rotary tables

Demmeler DLLT 4000 Rotary tables 

Rotational Axis, Hydrostatic Bearing
Linear Axis, Roller-bearing
Generous dimensioning of linear guides.
Type DCLT for turning and grinding.
The interpolating rotary axis with the type DRCLT also makes exact positioning and milling possible.
Demmeler duo drive for high machining torque and high rated loads of up to 200t possible, depending on required torque, available with or without gearbox.

Rotary Table CLT250p

20kW / 20t Output

Exemplary diagram of a drive. Design according to customer requirements.

Max. driving power of 2 x 20 KW (40 KW) up to 2 x 105 KW (210 KW) possible

Max. table top size from Ø 2000 mm to Ø 8000 mm

Max. speed up to 2501/min

Positioning accuracy depending on the respective control, up to 1. Customised requirements like higher rated loads, processing torque, or allowed moment of inertia can be catered to on request. We would be pleased to provide information on other parameters on request. The right to technical changes and misprints is reserved.

The theoretical rated load of our Tables is clearly higher. In general, the following applies: For longevity and precision, the decisive factor is not only rated load but rather a very large bearing diameter in proportion to the table top size.