Demmeler Drvt 1800 Rotary tables

Demmeler Drvt 1800 Rotary tables 

With Tilt to Maximum Performance

Main use is the treatment of rotor hubs for wind farms and similar components.
Angle adjustment standard up to 100°. On request, up to 90° possible.
Tried and tested principle with additional servo axes.
Also available without displacement axis.
Angle of movement up to 90° possible.

Positioning accuracy, depending on the respective control, up to 1. Customised requirements like higher rated loads, processing torque, or allowed moment of inertia can be catered to on request. We would be pleased to provide information on other parameters upon request. The right to technical changes and misprints is reserved.
Angle of movement up to 90° possible on request.

Setting and Machining on a Vertical Table Top
Rated load of up to 100t possible.
Table top size up to approx. 6500mm Ø.
Optimum chip removal.
Stable bearing.

Positioning accuracy, depending on the respective control, up to 1. Customised requirements like higher rated loads, processing torque, or allowed moment of inertia can be catered to on request. We would be pleased to provide information on other parameters upon request. The right to technical changes and misprints is reserved.
The theoretical rated load of our tables is clearly higher. In general, the following applies: For longevity and precision, the decisive factor is not only rated load but rather a very big bearing diameter in proportion to the table top size.