Dimeco DMAX 1.25 cutting and forming skills

Dimeco DMAX 1.25

ISM Machínery has developed Spíral Tubeforming Equípment usíng proven
technologies combined wíth the latest engíneered state of the art electronícs to
delíver the best Spiral Tubeformer in the industry.
ISM Spíral Tubeformers ínclude a Programmable Logíc Controller PLC powered by the exclusíve Spiral Smart Technology TM SSTTM programming.
SSTTM programming provídes operators wíth setup requirements and gives
operators automatíc troubleshootíng at their fınger típs 
D-Max seríes Spíral Tubeformers are hydraulically powered resulting in asuperíor combínatíon of speed, strength and relíabílity. The D-max seríes tubeformers also use a Flying Slittíng Devíce. Thís device allows for a quiet, gasless and clean cut of the spíral pipe.
ISM Machínery offers two state of the art models, D-Max , to meetyour Spíral Tubeformíng needs.
This passage outlines the specifications for Spiral Duct Machinery offered by a company, specifically focusing on the D-Max series. Here's a breakdown of the key details:

D-Max Spiral Duct Machinery Specifications:

Material Thickness (Galvanized Steel):

D-Max Standard: .016 - .0516 mm

D-Max Extended: .016 - .0790 mm

Diameter Range:

D-Max Standard: 3" - 64" (75 mm - 1600 mm)

D-Max Extended: 3" - 100" (75 mm - 2500 mm)

Maximum Strip Speed (Galvanized Steel):

D-Max Standard: 210 feet per minute (64 meters per minute)

D-Max Extended: 265 feet per minute (80 meters per minute)

Key Features:

The D-Max series is designed for manufacturing spiral ducts, which are typically used in HVAC (Heating, Ventilation, and Air Conditioning) systems.

The machinery is built with a focus on speed and efficiency, providing higher speeds in the D-Max Extended version (265 fpm vs. 210 fpm).

These machines can handle a wide range of material thicknesses, accommodating different gauges of galvanized steel.

The diameter range indicates the versatility of the machinery, capable of creating spiral ducts of varying sizes, from smaller diameters (75 mm) to larger ones (2500 mm).

Applications:

This machinery is used for the production of spiral ducts in industries such as HVAC, where precision and efficiency in forming ducts from galvanized steel are crucial.