Enshu WE 30ve vertical machining center

ENSHU Límíted   WE30Ve VERTICAL MACHINING CENTER 
High-torque, hígh-power spíndle WE30Ve
FANUC έ
A powerful spinple is an essential condítion for improving productivity.
The WE30Ve is provided with a powerful motor that transcends íts class
as standard, hiding a potential that approaches BT40 specification with
BT30 specification.
Sfandard FANUC : Maximum output 13kW, maximum torque
Optíon MELDAS : Maximum output , maxímum torque
If you want to perform particularly heavy cutting, you can optionally
select a high rigidity spindle in which case, the maximum spindle
rotation speed is 8000 min-l .

Large processing area Preventing cuttings from íntrudíng
ínto the tool magazíne

The simple and large processing area provides the user with outstanding ease of use. It All possible measures are taken to secure the coverings and
extends the possibílítíes not only for large scale work pieces, but also fixture installation protect the cutting tool from the effects of cuttings.
etc. for the customer. It is designed to be flexibly compatible for wiring and piping ínstallation etc. for fíxture.

High rigidíty body High precision machine configuratíon

A high rigidity body is indispensabIe for
Strict consideration has been given to supporting such outstanding features as a
practical precision, such as maintaining stabte powerful spindle, precise maintenance, high
precision by means of a bilaterally speed movement, etc.
symmetrical structure, a 3-poiпt support The WE30Ve has minimal overhang due to its
structure whose precision can be easily high rigidity gantry type column structure,
adjusted, etc. An optional bed flow trough is designed with the latest technology.
also avaílable for preventing heat being
transferred to the bed.
Well-balanced, high-speed feed rate
The speed of the well-balanced feed rate has been increased by making the
Y axis a table side drive. Whi1e maintaining a load weight of 350kg, the
speed of rapid traverse is consistent in the X, Y, and Z axes at 50m/min.
Lubricating oil is automatically supplied to all axes so that precision can be
maintained over long periods of time.

Telescopíc cover employing pantograph type
A pantograph has been incorporated into the telescopic cover to allow it to
operate smoothly even during rapid movements.

Saves even more space

The body has been made more compact without compromising the
processíng area, operability, and maintainabiIity, making it effectively
utilizable in limíted factory spaces.
In particular, the compact machine width 1200mm and left-rìght maintenance-free structure are perfectly suited to side-by-side arrangements similar to production lines.

Maíntenance-free on both sides

Maintenance components such as power supply, air supply, lubricating oil
supply, cutting disposal, etc. are arranged at the rear of the machine,
making ít maintenance-free on the left and right sídes. Maintainability is
good even when multiple machines are arranged side-by-side.

Maintenance area ís arranged at the rear
Prevents scattering of cutting fluíd and cuttings wíth a total cover
Side door for tool change OP
em upgrade example for reference
ouch panel specification

Cuttíng fluíd device with líft-up chíp conveyor OP

Control unít varíations FANUC  FANUC touch paπel specification
Both FANUC control units and OP is available
MITSUBISHI control units OP are available. Either control unit is With touch pane1 specification, the
designed with aп easy-to-use layout. operating paneI is downsized and the
operation system can be freely customizedwith specialized us about
customization.

Fíxture connection pipe incorporatíon OP Cable veyor

Four ports caп Ьe arranged from the rear for suppIying oil and air pressure
to a fixture mounted on the table.
4x Rc1/4 ports, 7MPa A1so, four ports for adhesion confirmation air caп
be arranged from the front. 4x Φ6 tubes,

Cuttings flowing out from the machine are automatically extracted by a
conveyor. Depending on the type of work material, dedicated aluminum
tanks and aluminum/cast metal dual purpose tanks are available.
Please contact us about cutting extractìon directions.

In-magazíne tool breakage detectíon OP

Tool breakage is detected ínsíde the machine, without atfectíng processing
times. For each tool you want to subject to breakage detectíon, you must
attach one. The maximum detectable diameter is φ12mm, and the minimum
is φ3mm. You cannot use tools of a diameter greater than φ46mm.
The descríptions given here are of examples.
We can provide you with proposals that are suìtable to your needs.

Machine Oulline Standaıd Specification

Spindle Output Diagram sTD. FANUC spec. Spindle Output Díagram OP:MITSUBISHI spec.
 Air blow ring
Mist coliectór
Built-in piping for fixtúre
Maintool kit

The product is sublect to the Japanese government Foreign Exchange Law with regard to security controlled items; whereby ENSHU should be
notífıed príor to íts shípment to another country.
VEGETABLE