Ercolina CT 4A7 bar twisting device

Ercoline BAR TWISTING DEVICE CT4A7 for CE40 CT5A7 for CE50 C5A7/4 - BAR TWISTING ATTACHMENT FOR CE40 - C5A7/5 - BAR TWISTING ATTACHMENT FOR CE50 The accessory consists of the base unit and the attachment for connecting with roller benders. The attachment alone is available separately for both CE40 or CE50. Accessory for bar twisting used in the production of ornamental metalwork on gates, railings, etc. Equipped with a 2m worktable, 7ft working length, 400 mm blind hole on the motor side, and an electromechanical turn counter with 1 precision. Quick insertion of bar into machine, by means of an auto-aligning system between chuck and end clamp. WORKING CAPACITY Square profile 25 x 25mm OD in rolled iron 42 Kg/mm Flat bar 40 x 8mm OD in rolled iron 42 Kg/mm As standard, the accessory permits the fabrication of very small spirals with solid bar for ornamental ironworking. CCL-Ю CL D The number of rotations that the machine completes is programmable, to allow repeatable complex designs to be made.

TIE BAR CE40-CE50 C5A2 Universal for all CE40 and CE50 machines C5A2 - NEEDED TO STIFFEN SHAFTS WHEN BENDING LARGE PROFILES/TUBES AND/OR LARGE WALL THICKNESSES PROFILES - TUBES MARKED BY T1 IN THE CAPACITY TABLE ON PAGE 12 The tie bar increases rigidity of the shafts when bending heavy tubes and profiles, and therefore increases repeatability of the bending radius. The shafts on all Ercolina roller benders machines are forged for the highest strength, not just machined and hardened, and are virtually unbreakable. PRESS NEW Ask for details on CE70 and CE100, larger capacity roller benders machines from ERCOLINA. ANT1-TW1ST DEVICE FOR ANGLE BARS BENT LEG IN C5A5 Universal for all CE40 and CE50 machines NEEDED TO STRAIGHTEN THE TWIST IN PROFILES SUCH AS L ANGLE BARS BENT LEG IN The anti-twist rollers are mounted in conjunction with the side pressure rollers fitted as standard to the machine. The anti-twist rollers exert force on profiles that twist while bending, allowing the operator to correct the twist and achieve perfectly flat bends.

SP10L BENDING DEVICE C55A11 for CE40-CE50 Accessory for producing large pitch spirals and spiral staircase handrails for tube diameters up to a maximum of 50 mm 2 OD The device will bend profiles in a spiral. Since the device is an accessory, it can be purchased separately from the machine. Its mounting point on the machine has been designed for easy assembly and reversibility for both right-hand and left-hand spirals. The spiral is controlled at its outlet by a mechanical system that, though simple to use, guarantees excellent precision. In general, the device is used to make spirals from profiles used for supporting steps and handrails on spiral staircases. The tools supplied with the machine have been selected to cover the majority of profile bends used for this kind of application. High precision mechanical counter ensures repeatability of lifting roller position.

ADJUSTABLE TEMPERED STEEL ROLL SET FOR SMALL SPIRALS C4RR for CE40 and C5RR for CE50 Table - WORKING CAPACITY Profile Dimensions Minimum bending mm inches mm inches 7/8 STOP PRESS NEW Ask for details on CE70 and CE100, larger capacity roller benders machines from ERCOLINA. SPECIAL INTEGRAL TEMPERED ROLL SETS Roll Sets for Tubes in Roll Sets for Pipes in Stock item DOUBLE GROOVE ROLL SETS FOR PIPES IN GAS INCHES COD. CE40 Ø GAS C4SPD-1 C5SPD-1 3/4-1 C4SPD-2 C5SPD-2 1/2-1 1/4 Stock item C45PD and C5SPD: roll sets on request for CE40 and CE50 with double groove for round bars and tubes other sizes: the sum of the two grooves must not exceed 64 mm.

ROLL FOR TUBES

ROLL ON REQUEST MILLIMETRES Stock item Only up to 70 mm. Each set of rolls can only fit one tube diameter, unless double groove rollers are chosen. SETTE M BRE 2 0 01 IMPORTANT when ordering from tables 4 and 5 please specify tube Ø. ACCESSORIES ON REQUEST MODULAR ROLL KITS ART. C4RC - C5RC COD. CE40 Max Dím. COD. CE50 Max DIm. Each kit includes flanges + flanges + 6 cs spacers spacers C4RD C5RD ART. C4RD - C5RD 80 2,75 4 Modular roll kits are used to bend all types of HOLLOW and SOLID rectangular and square profiles, and achieve a much better bend quality EXAMPLE: than the universal tools Art. C4ST/C5ST thanks To bend a 40x20 profile on the CE40 ring roller to the radiused form sof the tooling set. with a 40mm, inside bend, select modular kit Art. C4RC and use 6 flanges. The same kit Art. C4RC can also be used for other ART. C4AL - C5AL profiles such as 25-30-35-45-50, removing or adding flanges or spacers according to size. ART. C4SP For tubes in ALUMINIUM, stainless steel and other ornamental ART. C5SP materials order rolls Art. C4AL for CE40 or C5AL for CE50 For PROFILES WITH SPECIAL SHAPES not listed in the tables, order Art. C4SP for CE40 or C5SP for CE50 - priced to specific quotation. A technical drawing to scale is important with the bend direction and all other possible specifications for feasibility study. SUMMARY OF ACCESSORIES ON REQUEST CE40 CE50 DESCRIPTION CODE CODE C4ST C5ST REPLACEMENT STANDARD UNIVERSAL ROLL SET 15 pieces C4SP C5SP STEEL ROLL SET FOR PROFILE AND SPECIAL APPLICATIONS C4AL C5AL SPECIAL PLASTIC ROLL SET FOR LIGHT ALLOYS C4SD C5SD SPACERS FOR STANDARD ROLLS 6 pieces - thickness 5 mm. C4RC C5RC MODULAR HARDENED STEEL SPECIAL ROLL SET 12 pieces for CE40 and 15 pieces for CE50 - complete with spacers C4RD C5RD 10 mm SPACER FOR SPECIAL COMPOSITIONS C4A1 C5A1 TRANSMISSION KIT FOR THIRD ROLL DRIVE C4A2 C5A2 SHAFT TIE BAR C4A3 C5A3 SHAFT SET IN NON-STANDARD LENGTH C4A4 C5A4 TWO ANTI-TWIST DEVICE FOR ANGLE BARS BENT LEG IN SETTE M BRE MANDREL MEGABENDER The revolutionary MEGABENDER V576 with mandrel with its mechanical operating unit, is produced on a large scale and sold in 40 countries worldwide and is therefore available at a much more reasonable price than comparable products. MEGABENDER V576 with mandrel is linked to an entirely semi-automatic mandrel support. This combination, with 25 years experience in tube bending, has created a unique machine that any small manufacturing set-up can truly employ; simple, easy to install and with functions that make the machine ideal for all high-quality work, short cycles or even for occasional use at a really competitive price Advantages: extremely high-quality tube and profile bending even with very thin wall thicknesses small radii The solid, cast-iron construction of the auxiliary tools ensures rigidity and precision during bending Highly competitive price, quick machine set-up, cast iron tools, semi-automatic work cycle: the foot pedal control automatically starts the following cycle: close clamp-close pressure die - mandrel return into position - open clamp - open pressure die - former return-minimum bending radius: 1.3 times the tube's outside diameter depending on material, wall thickness and outside diameter maximum bending radius: 180 mm maximum bending angle: 180 degrees versatility: by removing the device, your machine can bend with the traditional Ercolina non- mandrel system accuracy: 3-axis bend control x - y- z THE MEGABENDER MANDREL MACHINE LINE

Art. Q3О-H GABENC E .24 Table - Standard accessories 25 Accessories on request for bending any tube or profile Pressure die Wiper die Clamp die Plug mandrel Flexible mandrel Sphere

Table of minimum radius with mandrel Megabender