Erlo TC/TCA /TCE column drilling machine

Erlo TC/TCA /TCE  column drilling machine 

Column Drilling Machines with Various Feed Systems

Feed Systems:

TC - Manual Feed: Manual feed system for precise control over drilling operations.

TCA - Automatic Feed: Automatic feed system for consistent drilling speeds and reduced manual intervention.

TCE - Automatic Feed with Electromagnetic Clutch: Automatic feed with an electromagnetic clutch for enhanced control and adaptability in drilling operations.

Drilling Capacity:

Steel Drilling Capacity: From 25 mm to 70 mm, with a robust standard equipment and solid construction designed for easy operation and extended use.

Features and Options:

Wide Standard Equipment: Built with a strong foundation, designed for comfortable use.

Customizable Performance: Ability to enhance standard features through additional cycles, equipment, and accessories. A variety of these options are detailed in the catalog.

Additional Information:

Technical Solutions: The machines and equipment can be customized to meet specific drilling and tapping needs, ensuring tailored solutions for various applications.

Component Descriptions:

• Transmisión por Engranajes / Geared Drive / Transmission par Engrenages / Diegetriebeantrieb:

  • Refers to the mechanism that transfers power from the motor to the drill, using gears.

• Placa de Mandos / Command Plate / Plate de Commandes / Bedienfeld:

  • The control panel where the operator manages the drilling machine's settings and operations.

• Regla de Profundidad Milímetros o Pulgadas / Depth Ruler mm or Inches / Règle de Profondeur mm ou Pouces / Tiefenmessschiene Millimeter oder Zoll:

  • A ruler or gauge used to measure and set the drilling depth, available in millimeters or inches.

• Expulsor de Brocas / Drill Ejector / Éjecteur de la Foret / Bohrerauswerfer:

  • Mechanism for ejecting the drill bit from the machine after use.

• Volante Avance Sensitivo / Sensitive Feed Wheel / Volant Avance Sensitive / Vorschub von Feinbearbeitungen und Plandrehen:

  • A sensitive feed wheel that allows precise control over the rate at which the drill advances into the material.

• Tope Ajustable de Profundidad / Adjustable Depth Stop / Butée Réglable de Profondeur / Einstellbarer Tiefenanschlag:

  • An adjustable stop that controls the maximum drilling depth.

• Nuez Roscada con Tuerca de Protección / Threaded Nose with Safety Nut / Nez Fileté avec Écrou de Protection / Gewindennase und Schutzmutter:

  • The threaded part of the machine with a protective nut for safety and stability.

• Mesa Giratoria e Inclinable / Rotating and Tilting Table / Table Tournante et Inclinaison / Dreh- und Schwenkbarer Tisch:

  • A table that can rotate and tilt to position the workpiece accurately.

• Ranuras en T / T Slots / Rainures en T / T-Nutten:

  • T-shaped grooves on the table that allow for the attachment of various fixtures and accessories.

• Equipo de Refrigeración / Coolant Equipment / Équipement de Réfrigération / Kühlschmiermittelaggregat:

  • Equipment that provides coolant to the drilling area to reduce heat and improve cutting efficiency.

• Superficie Rectificada / Grounded Surface / Surface Rectifiée / Geschliffene Oberfläche:

  • A surface that has been precisely ground to ensure smoothness and accuracy.

• Engrase del Cabezal / Headstock Greasing / Graissage de la Tête / Bohrkopf-Schmierung:

  • The lubrication system for the headstock of the drill to ensure smooth operation.

• Mando de Avance / Feed Command / Commande d'Avance / Bedienelement Vorschub:

  • The control mechanism for adjusting the feed rate of the drill.

• Equipo Eléctrico Bajo Voltaje / Electrical Equipment at Low Voltage / Équipement Électrique à Bas Voltage / Elektrische Ausrüstung mit Niederspannung:

  • Electrical components designed to operate at low voltage for safety and efficiency.

• Selectores de Avance y Velocidades / Speed and Feed Selectors / Sélecteurs d'Avance et Vitesses / Vorschub- und Geschwindigkeitswähler:

  • Controls for selecting the feed rate and speed of the drilling machine.

Dimensions:

Dimensiones de la Mesa Standard / Standard Table Dimensions / Dimensions de la Table Standard / Abmessungen des Standardtisches:

The standard dimensions of the drilling machine’s table.

Dimensiones Base Standard / Standard Base Dimensions / Dimensions de la Base Standard / Abmessungen des Standard-Sockels:

The standard dimensions for the base of the machine. Fixed table with fixed support available upon request.

Mesa Fija con Soporte Fijo Bajo Demanda / Fixed Table with Fixed Support Upon Request / Table Fixe avec Support Fixe Sur Demande / Festtisch mit Fester Unterbau auf Anfrage:

A fixed table with a fixed support option available upon request.