Fasti 510 control

Fasti 510 control   

Control at machine
Body
Foot switch
Operating modes
single stroke
Continuous stroke and inching

Control at machine
Body
Foot switch
Operating modes
single stroke, continuous stroke and inching

Motor gauge witch preselection of measure 

Controllec support

SPC controle

Control at swing-type panel
Foot switch
Operating modes: single stroke, continuous stroke and inching.

ControUed sheet support 
Controlled motoг gauge
Controlled cutting angle 
Controlled blade clearance 
Controlled cutting length 
LCD touch screen display 5.7 black/white.
Input of 143 programs with 9 program steps each 
Numeric data entry via touch-sensitive keypad

Actual position 
Error detection on entry of data
Floppy disk drive 3
Colour screen
Integration of transport and stacking units
models 570, 571, 5711 

Blades for steel
Tensíle strength
max, 400 N/mm
max. 700 N/mm

Blades for rubber copper/zinc

Special blades for small circles from 80 mm Ø, sheet thickness max. 1 mm 

Tensile strength 
max, 400 N/mm'
max 700 N/mm

1 pair of clamping discs for clampi g without marks. sheet thickness max 1 mm 
60 mm Ø
80 mm Ø
60 mm Ø, rubber coated
80 mm Ø, rubber coated 

Flanging attachment incl, wheels, for flanges up to 10 mm

Flanging wheels

Strip cutting attachment

Adjustment on guillotine
body
Spindle
Excentric
Pneumatics

Closing on guillotine bow
Spindle
Excentric
Pneumatics

Gear motor
Polechanging geared
V= 12/24 m/min.*)
Infiпitely variable
V= 8-40 m/min *)

Rule for table

Holding down device
continuous
split
idividual cyllnders

Grease lubrication by
hand gun
motor gun

Table plastic-coated

Lateral angle gauge with scale
Gauge measure
max. 750 mm 
max. 1000 mm 
max. 1500 mm 
max. 2000 mm 
max. 3000 mm 

Angle gauge, adjustable from 0-360° according to scale, with T-slot

Manual gauge, back, HAH51, adjusting range 0-530 mm for parallel adjustment or adjustment via sleeve

Mаnual gauge, back, HAH 52, adjustiпg range 10-750 mm, for central adjustment via handwheel 

Manual gauge, back, HAH 53, adjustmg range 10-750 mm, central adjustment via handwheel, front-operated, equipped with digital display.

Motor gauge, back travel range 10-1.000mm. MAH 51 TraveIling by motor via threaded spindles MAH 152 Tгavellig by motor via ball гoller spindles

Tipping gauge/ Lateral gauge with fine adjustment

Pivoting gauge wíth fine adjustment

Table extension
750 mm
1000 mm
1500 mm

Table extension with scale
750 mm
1000 mm
1500 mm

Precision-type table extension with scale
1000 mm
1500 mm

Ball rollers in steel 

Inclined assembly of roIlers in front of table extensions

Filling pieces for flex-table without plastic cover
With plastic cover 

Noise attentuation

pneumatically controlled
sheet support  with roller guide bars

with roller guide bars up to max. 3 mm sheet thickness

Sheet return in connection with cutting material separator

Combined sheet support, type VS with sheet retum, with scrap separistor incl. scrap container, forced guidance of sheet support by means of top cutting beam, sheet thickness max. 4 mm

Automatic cuttiпg angle adjustment, hydraidically actuated.

Blade clearance adjustment maпually hydromanualiy operated with scaled scews 4 steps, automatically via control

Protection of guilotine back side by protective lightbarrier

Gauge rail to be swung out by haпd.

Contact cuttmg device with 2 maпually adjustable contacts

Adjusting valve for infinítely variable redtiction of hold-down force with manometer

Release of holding-down device in cutter beam UDC
WL 2000 3000 mm
WL 4000 - 60110 mm

Plastic shoes for holding-down device

Depth of gap in lateral frame
50 mm
250 mm
500 mm

Conveyor belt transport and stacking units

Pneumatic sheet support up to max. 3 mm sheet thickness

Pneumaticatly controlled scrap separator with light indicator аnd scrap container

Scrap separator as belt extensìon

Gauge bars inttnitely variable over complete w dth аnd depth up to 1000 mm

Start-/stop mode for mаnual removal of cut sheets

Light-barriersystems for securing conveyor belts and stacking units

Aligning unit for cuts

Stacking transporter with gauge bars

Hydraulic elevating platform for stacking unit

Roller conveyor for transport of sheet stacks

Roller way on stack transporter and lateral roller way driven bγ motor