Fat (haco) Tur 560 universal lathe

Fat (haco) Tur 560 universal lathe 

THE CONTROL SYSTEM (SIEMENS 810 D MANUAL TURN)

Conventional turning with electronic handwheels and a digital/graphic positioning display

Teach-in: the first piece is machined manually, the next piece is then CNC controlled;

Constant Surface Speed

Elementary geometries: longitudinal turning and facing, conical and circular turning with CNC support

Cycles: stock removal, grooving, drilling, threading; undercutting. The reworking of threads is also possible

Contour mode: drawing contours, contour calculator for undefined elements, machining a contour, also manual machining of contours

User-friendly, with a straightforward program display

CNC mode: executing a program in ISO/DIN code, read-in and read-out of programs via V24 interface (RS 232)

Tool table for 99 tools

2D Graphic simulation before and during turning

Memory 0.5 MB standard up to 2.5 MB option

MAIN FEATURES OF THE FAT CNC TURNING MACHINES

A European-manufactured machine, constructed from high-quality components

Rigid, wide bed and slide construction with 3-V bed slideways ensures high rigidity and accuracy of operation, also fine surface finish of the machined workpiece

Hardened and ground bedways, along with hardened and ground gears ensure the long life and durability of the machine

Centrally operated lubrication system

The large, precision-made, and oversized ball screws ensure precise positioning

Heavy-duty spindle with a bore of 105 mm on TUR 560 / 630/710MN and 140 mm on TUR 630A/710AMN is supported by a combination of precision double-row cylindrical roller bearings and a double-direction angular contact thrust ball bearing. This system provides the highest precision and rigidity for heavy loads and superior surface finish

A powerful spindle motor of 18.5 kW

A two-speed gearbox offers high torque available for heavy stock removal up to 1800/2500 rpm

The complete work area is enclosed while providing good accessibility

Manual gear change as standard for TUR 560 / 630 / 710 MN, automatic gear change for TUR 630 A/ 710 A MN

QUICK CHANGE TOOLING SYSTEM

Quick-change toolpost — type Multifix Size C as standard

An 8-position bidirectional tool turret VDI 40 (DIN 69880)

A 4-position tool turret for toolholder according to DIN 69881

An 8-position turret for live tooling VDI 40

Boring bar holder on T-slot

DOUBLE CHUCK

The TUR 630 A/ 710 A MN are equipped with a large, 140 mm spindle bore and double spindle nose at the front and the rear side (Camlock D1-11). This enables the turning at the ends of both long and heavy workpieces, holding the piece in the two chucks

HIGH PRECISION DOUBLE V SLIDEWAYS

The double V slideways, along with the inner V-shaped slideway for the tailstock, are induction hardened and precision ground. The wide heavy-ribbed bed is double-walled, providing excellent rigidity and the best surface finish.

TAILSTOCK

This specially extended neck allows more clearance between the tailstock body and the cross slide. This design permits better access for machining parts close to the tailstock center. An hydraulically operated tailstock quill is offered as an option.

CONTROL PANEL

The machine is ergonomically designed, and the control panel is movable over the entire working length of the machine.

STANDARD MACHINE EQUIPMENT

- Siemens electrical equipment and motorization with Siemens 810 D Manual Turn control - voltage 3 phase 400 V
- Colour RAL 7031/7044/1007
- CE conformity
- Quick-change toolpost type Multifix Size C (without toolholders)
- Worklight (24V)
- Complete coolant system
- Working area enclosure with interlocking
- Automatic lubrication for headstock
- Automatic lubrication for carriage & cross slide
- Manual tailstock quill
- One set of operation/programming and maintenance manual

The TUR 630 A/710 A MN is equipped with a large 140 mm spindle bore and double spindle nose at the front and the rear side (Camlock D1-11).

OPTIONAL MACHINE EQUIPMENT

- Live center
- Steady rests Ø 10-180 mm, Ø 140-300 mm, Ø 100-380 mm
- Follow rest Ø 10-140 mm
- 3-jaw self-centering chucks Ø 250 mm, Ø 315 mm, or Ø 400 mm
- 4-jaw self-centering chucks Ø 400 mm, Ø 500 mm
- T-slots face plate
- Hydraulic aggregate
- Hydraulic chuck actuator, with or without through-hole, and hydraulic chuck Ø 250 mm, Ø 315 mm, or Ø 400 mm
- Pneumatic actuated chuck
- Automatic gear change
- Hydraulic quill tailstock
- DIN 55027/C1-8 spindle nose, Ø 90 mm spindle bore
- Chip conveyor
- 8-position tool turret head with tool disc (VDI 40)
- 4-position automatic horizontal type turret
- Toolholders for Multifix or tool turret
- Spindle indexing 2.5° or C-axis positioning in combination with 8-position tool turret with live tooling
- Transformer to other voltages than 3 phase 400 V
- Off-line software - ManualTurn on PC
- Network option - 3.5" floppy disc station
- Third movable handwheel
- Linear scale - measuring system for X-axis
- Hydraulic self-centering steady rest

HACO / FAT UNIVERSAL CNC LATHE TUR 560 / 630 / 630 A/ 710 / 710 A MN

The TUR MN lathes combine the requirements for optimal operation of a modern workshop: the finished workpieces are produced quickly and easily due to very simple operation and programming, a rapid learning and set-up time, very high precision, low maintenance, and all of this for the best price conditions. In brief, a teach-in CNC lathe of the highest quality for heavy-duty machining.