Fermat 1800 pick up station 1

Fermat Pick-up station AUTOMATIC 2 POSITION PICK-UP Pick-up is used for automatic change of milling heads. All automatic milling heads have sensitive sensors, so it is dangerous to change heads manually as there is a big risk of damage. There are different design solutions. Depending on the needs of production, the customer can choose what suits him best. 1 POSITION PICK-UP ATTACHED TO ROTARY TABLE CLAMPING PLATE Suitable for table-type machines for tables 1800 x 2200 mm and bigger. The head holder consists of two hinged arms permanently attached to the side of the plate. When the arms are folded, there is no risk of the holder hitting the column during rotation. The head is accurately seated in the portable frame. For this solution, as an option, we offer also a cover for the milling head, which prevents its possible damage, for example caused by flying chips during machining. It is a semi-automatic exchange of milling head, controlled and inspected by the machine operator. Fast and accurate exchange for a reasonable price. 1 POSITION PICK-UP ATTACHED TO FLOOR PLATE Suitable for machines types WRF and WF 13R with floor plates. The head holder is placed on the floor plate, in locating sockets inside T-slots. The head is accurately seated on the holder on cylindrical pins. In some situations, the holder may take up space necessary for the workpiece, then it is to be removed out of the work area by a crane. It is a semi-automatic exchange of milling head, controlled and inspected by the machine operator. 2 POSITION PICK-UP AUTOMATIC Suitable for WFT 13 and WFT 15 machines. Automatic Exchange with CNC Control system. The whole pick-up is movable, so it can reach the headstock. Typically, one position is for a milling head and the other for a cover plate. Can be also used for two milling heads. The cover plate is made of plastic and is attached to the headstock manually. Fast and accurate exchange that eliminates the danger of damaging the adapter of the milling head. 2/ 3/ 4- POSITION PICK-UP FLOOR TYPE Suitable for all floor type machines. Attached to the floor plate. Can be integrated into the area of a robot for the exchange of tools. Fast and accurate exchange that eliminates the danger of damaging the adapter of the milling head. 32 Automatic Tool ATC CHAIN TYPE Changer ATC AUTOMATIC TOOL CHANGING Automatic tool change helps to save time, increase productivity, and protect the operator. It is the choice for productive production. ATC CHAIN TYPE ATC is able to exchange tools directly into the spindle or into the milling head in zero position. Two options for horizontal or horizontal and vertical exchange. Horizontal exchange only - into the boring spindle. ATC CHAIN TYPE HAND Horizontal and vertical exchange - into the boring spindle and into the automatic milling head in vertical or horizontal position. Hydraulically operated. Max. number of tools: 120. ROBOT TOOL CHANGER The robot is able to exchange tools virtually into any position of the head, the max. number of tools is 210. Tool rack with a robot is an independent enclosed workspace that provides the possibility of manipulation with tools without safety risks for the operator or the risk of a crash for the machine. There is a special access point for adding tools, from where the robot takes tools and puts them into the tool rack. This mode increases time effectiveness of the machine. ROBOT TOOL CHANGE The advantages of the robotic solution: Faster tool change. Almost no maintenance or service interventions. The possibility to change tools into various accessories and attachments. There is no interference in the work area normally encountered by the required rail of the traditional mechanical tool changer. The tools can be exchanged either to the working spindle or to a predefined position on the automatic milling head. As a standard, exchange is possible in two positions A, C, A, C, optionally any other position is possible. The exchange can also be done into the working spindle with an attached spindle support sleeve from Fermat's production. ROBOT TOOL CHANGER INSIDE The robot is equipped with a hydraulic tool gripper with two holders. The first tool holder is occupied with the prepared tool and the second tool holder will be taking the tool out from the spindle. After the tool change is completed, the doors will close automatically, and the robot will place the tool into the defined position of the tool storage rack. Max. number of positions: 105/210 tools. Maximal tool weight: 25 kg by using gripper no. 1 and 2, 50 kg by using only one gripper. 33 Heads Suitability Usage UFiM 20 PHM 20 OHM 20 OMG Manual heads Alberti T90-10 UHM 30 PHM 37 PHA 37 UHAmi 30 UHA 2.5 UHA SDHS PHAmi 60 PHA 1 E-PHAmi ZX 200 ZX 300 D A TA Tronic 200 FH 65 FH 80 D A UT3-360 D A UT5-500 D A UT5-630 D A UT5-800 

Full covering including mist extractor and internal grinding Automatic balancing system and additional accessories will be delivered Axial probe separately, according to coordination with Cooling with a belt and magnetic filter the suppliers FERMAT.

Full covering including mist extractor and internal grinding Automatic balancing system and additional accessories will be delivered Axial probe separately, according to coordination with Cooling with a belt and magnetic filter the suppliers