Fermat WFC 10 horizontal boring mills

WFClO Diameter of spindle mm 100 / 110 Taper of spindle 15050 / BT50 / CAT50 Max. Spindle Speed rpm 3000 optionally 4000 Main Power Heidenhain or SIEMENS CNC 51/S6 kW Max. Torque Heidenhain or SIEMENS CNC Main Power FANUC CNC Max. Torque FANUC CNC Cross Travel of Table mm 1250 / 2000 Y Vertical Travel of Headstock Longitudinal Travel of Column mm 1250 1500 W Spindle Travel mm 730 Rapid Feed X, Y mm/min 8000 14000 optionally 30000 Rapid Feed Z, W mm/min 8000 14000 optionally 30000 , 8000 Rapid Feed B rpm 2 optionally 4 2 optionally 10 Max. Table Load kg 3000 / 5000 Table Size mm A large number of accessories are available. ACCESSORIES DETAILS 8 HEADSTOCK Rugged, powerful, precise. The headstock is made from cast iron GGG60 and is equipped with a digitally-controlled servomotor turning the spindle, continuously regulating its rpm. spindle travel W axis of 730 mm, driven by a servo- motor and ball screw. Clamping spindle taper 5K50 150, BT, or CAT. Torque transferred to the spindle through a two- speed planetary gearbox. Gears change automati- cally according to the programmed rpm. standard spindle support sleeve of 250 mm. COLUMN Headstock carriage in a cast iron casting, provides COLUMN movement of headstock in axis Y controlled by ball- screw and along box guideways. Guideways are lubricated by oil. COLUMN AND BEDS Rigid, tough, precise, designed to absorb vibra- tions during machining. The main framework of the machine the longitudi- nal and crosswise beds, slides, and the column base are made of cast iron GG30 with the addition of Cr and Cu; the functional surfaces of all the ways of the box guides are hardened 56 HRC and ground. Servomotors and ball screws drive the CNC rotary table along X axis and Z axis, headstock on Y axis. Ball-screw on axis Y is equipped with an electric brake at the bottom. BEDS Separate servo drives on all axes, controlled digi- tally, provide the means for linear, circular, and helical interpolation. CNC ROTARY TABLE Thanks to the simple design and excellent com- ponents, FERMAT CNC rotary tables require minimum maintenance and adjustments during their lifetime. Maximum load is up to 5 tons. Rotary table moves along X and Z axis on box guide- ways or linear guideways. The CNC rotary table consists of three main parts - bed, slide, and rotary clamping plate. The clamping plate is fitted to a cross roller bearing that secures high load capacity, no stick-slip, minimum friction. CNC ROTARY TABLE 2 servomotors with pinions provide the rotary movement on B axis, master/slave, no backlash. The rotary positioning of the table uses an absolute angle encoder increment of ; the table is set in position, and held in place by hydraulic brakes.