Finn-power X5 turret punch press

FINN POWER PUNCHING X5 TURRET PUNCH PREBB X5 TURRET PUNCH PRESS WELCOMES YOU TO FLEXIBLE PRODUCTIVE SHEET METAL WORKING With the new FINN-POWER X5, leading hydraulic punching technology is now more accessible than ever before. The X5 is a true, highly productive FINN-POWER equipped with many FINN-POWER features, which offers performance and reliability at low investment and operating cost. FINN-POWER X5 provides a cost- efficient entry into the flexibility and productivity made possible by versatility, manufacturing speed and user- friendliness of FINN-POWER technology. X5 FEATURES 23 metric ton 25 US ton hydraulic punching force Max. sheet size 1,250 mm x 2,500 mm 48 x 96 Punching capacity up to 8mm sheet thickness Flexible 20-station turret Fast tool change indexing Digitally controlled punch stroke High-end CNC controls by Fanuc Thought-out ergonomics for easy, productive operation

designed with the operator in mind

Performance and reliability at low investment and operating cost FINN-POWER X5 SOLID ENGINEERING PRODUCTIVE FEATURES Machine frame and coordinate table The X5 has a robust frame of welded construction. The rigid machine frame and coordinate table construction permit high axis speed and acceleration. The frame ensures perfect tool alignment when using full tonnage or nibbling processes. The coordinate table moves the work piece in X and Y directions. The slides move on hardened precision linear ball guides and are driven by maintenance-free AC servo motors. The rotation movement of the motors is transformed into linear movement over precision ball screws. Acceleration and deceleration of the axes is programmable. At the lowest acceleration level, the axes start and stop smoothly, i.e., even heavy workpieces can be processed without loss in precision. The X traverse is 2,584 mm; thus, 1,250 x 2,500 mm 48 x 96 sheet can be processed without repositioning. Working area can be expanded in X direction by automatic repositioning.

Machine tables Brush tables prevent noise build-up and protect sheet surface from scratches. The sheet is well supported and moves smoothly, and the table structure does not cause vibration which could be hazardous for micro joints. Full support tables for the maximum 1,250 x 2,500 mm 48 x 98 sheet size are included as standard. Maximum sheet weight is 200 kg 440 lbs. Only a simple push is needed to load larger sheets against the X pin located in the back part of the table. For loading smaller sheet sizes, another X pin is used, and one of 5 alternative table positions is chosen. Thus loading is made easy, whatever the sheet size.

Clamps Hydraulic system FINN-POWER X5 is equipped with two pneumatic clamps. They are closed by large pneumatic cylinders inside the clamp, and three hardened spikes ensure maximum grip during high-speed punching processes. The numerical control gives clear indication of correct clamp positions, to which clamps can be moved easily. All clamps have pneumatic central locking, and no screws or handles need to be opened or closed.

The clamps are equipped with sheet detecting sensors, which continuously monitor sheet security in the clamp, ensuring accuracy and reliable machine operation. All our skills and years of experience are the basis of the hydraulic system used in X5 machines. This technically advanced system offers reliable and fast punching and nibbling at lower noise levels.

Sheet clamps are operated by a foot switch, which can be located freely.

The X5 hydraulic system provides the basis for the following productive features:

Full 230 kN 25 US ton punching force throughout the stroke = Greater range in material thickness and hole size.

CNC programmable continuous speed control of punching = Optimization of efficiency and noise level.

Individual electronic control of stroke depth = No need for manual shimming after sharpening the tools.

Central locking for fast clamp positioning

Up to 600 hits per minute punching speeds when nibbling = Adaptive hydraulics and unmatched productivity.

Digital punch control Highly accurate digital punch control for special tools and applications = 5-position table Ease and accuracy in forming operations. for easy loading Unmatched productivity.

Adaptive hydraulics = Continuous punching operation.

FINN-POWER X5: SOLID ENGINEERING

PRODUCTIVE FEATURES Auto-Index system Turret The X5 auto-index concept is one of the many in its flexibility, FINN-POWER's tool carrier is record-breaking FINN-POWER design features unique. Automatic tool changing is accomplished in sheet metal working technology. The system by a bi-directionally rotating turret. The dies in rotates the punch and the die precisely in their the FINN-POWER turret are supported during tool holders using a single AC servomotor. the punching cycle by a die support anvil that directs the punching force into the frame of the

The auto-index system is rigidly built into the machine. The upper and lower turrets are machined upper and lower frame of the press; there are no together as a set to ensure permanent perfect alignment. gearboxes built inside the turret. This system allows you to add or change index or MultiTool stations whenever the need should arise. The FINN-POWER turret is equipped with a large hub design, it is gear-driven, and 30 mm

This exclusive FINN-POWER auto-index design diameter shot pins are used. This allows perfect allows full tonnage work at maximum material alignment in any plane during the punching cycle. thickness as well as nibbling at maximum speed Tool change is performed parallel to the sheet with all auto-index stations using appropriate positioning.

tooling.

The turret has a total of 20 tool stations. Seventeen (17) tool holders have been specified, and three (3) are free for customer selection. Index or MultiTools can be chosen. The turret has 29 tools as standard, and the number can be expanded by adding MultiTool stations. Max. tool diameter is mm.

The tool holders for punching tools are installed separately in the turret plates. This gives total flexibility in service, maintenance, and upgrading of the turret with additional index or MultiTool tooling.

Fast Indexing Easy operation and program loading Three stations for customer-specified FINN-POWER tool holders

CNC control FINN-POWER machines are equipped with the latest Fanuc 0iP NC controllers with 256 kB work memory and a standard NC user interface. Standard features include multi-piece function and machine diagnostics. RS 232 and a flash card slot are also included as standard for program transfer.

The control panel is integrated into the electric cabinet for easy cabinet placing and easy access to machine controls.

A RANGE OF OPTIONS FOR MEETING YOUR NEEDS Shop floor conditions and safety Entering the safety zones of the machine must Left: control cabinet cooler be prevented by appropriate safety devices. The Below: additional air cooler X5 can be equipped with electrical connection for safety equipment to fulfill CE requirements and local safety codes. photoelectric safety beams, light beams, gates, etc. If ambient temperature exceeds C F, a Control cabinet cooler and Additional air cooler for hydraulics are available to assure system functionality. An additional cooling capacity will ensure reliable machine operation. Clamping With Auto-clamping, clamps close automatically once the sheet is fed into the clamps. Thus, the operator has no need to use the foot switch. FINN-POWER's patented Programmable clamp setting fPCS1 eliminates the need for clamp protection areas and automates clamp position setup. The machine is therefore ready for another job in a matter of seconds. The X5 machine has a connection for the Third sheet clamp and Automatic individual clamp move options. These options allow repositioning of each clamp while holding the sheet with the other clamps. The turret can be equipped with MultiTool Punching stations to increase the number of tools. The MultiTool station is mounted on the turret like Two index stations are part of the standard a normal tool station and the tools are mounted delivery. Additional index stations can be in- in rapidly changeable punch and die cassettes, stalled at any time. which are available also as additional equipment. Optional tooling software is available for drop- in MultiTools, shearing, tapping, diamond, and wheel tools. Automatic Tool lubrication extends the lifetime of spring housing, sliding surfaces of tool and punch, and makes stripping easier. The Sheet lubrication extends the lifetime of the punch and makes stripping more effective. - Mate Easy Tapping Mineral oil or alcohol can be chosen as lubricant. Material flow As such, the X5 has been designed and built for ease, safe, and productive operation. Choosing from a range of options, you can facilitate operation further.

Wilson Wheel X5 options include a large Work chute for removing parts up to 500 mm x 500 mm x 19 7 in front of the turret. In small part production, this makes micro jointed parts unnecessary. Skeleton shaking or micro joint cracking is needed only for very big parts. Scrap conveyor sc1 removes the slugs and other punching scrap to a more accessible position from under the machine, making it easy to keep the working area clean and safe. The Lifting scrap conveyor SC2 removes slugs and other punching scrap from 801 lifting it up into a scrap barrel or bin. Vacuum-assisted slug removal is available with the SCV1 option. Part detection and Part conveyor can also be added.

Programming software NC Express is an advanced 2D-CAM programming system designed by FINN-POWER to support all FINN-POWER machines and machine combinations. The strength of the system is its high integration with the FINN-POWER equipment, which ensures the best machine performance in terms of machining speed, accuracy, and overall process efficiency.

NC Express with its easy-to-use 2D-CAD, advanced auto tool placement, automatic nesting and optimizer, parametric programs as well as a versatile interface for order management aims to minimize programming times, which means higher machine utilization especially in short-run production.

Control options CNC program memory can be extended with an optional 256 MB flash Memory card. The multi-functional memory card is a reliable and fast way to transfer the NC-programs from a programming PC to the X5, being also a swift tool to backup the NC-programs saved on the CNC. An External flash card reader/writer connects to the USB-port of the programming PC and allows the PC user to manage the memory card with standard MS Windows functions as any other connected data storage media. An Ethernet connection card allows the X5 CNC to be connected to the company's computer network. The NC-programs can be stored on any workstation in the network and copied directly to CNC memory whenever required.

With the option SDF (Screen display function), the X5 machine operator user interface can be duplicated and displayed on any computer connected to the company's network. The SOF displays exactly the same information as the machine operator user interface does [status, axis coordinates, alarms, etc.

Machine operator interface specially designed for FINN-POWER punch presses Cell control PC is a heavy-duty industrial PC equipped with touch screen, Windows XP operating system, and a cell software package with an impressive amount of software features designed and developed especially for FINN-POWER machines. The cell software package ensures continuous and effective machine operation, offering features like, for example, connection interface for remote production, work queues, complete tool management and checking system, automatic work queue, extended diagnostics, information system with online documentation.

FINN-POWER IN BRIEF FINN-POWER Oy and its worldwide network of subsidiaries and representatives specialize in advanced sheet metal working technology. The company was established in 1969. Following the introduction of its first hydraulic turret punch press in 1983, FINN-POWER has developed a modular product range for punching, laser cutting and bending, for solutions integrating right angle shearing and laser cutting with punching, and for automation of the entire material flow of your sheet metal working process.

Flexibly Yours, FINN-POWER GROUP FINN-POWER Global Headquarters Manufacturing Finn-Power Apologies, but the text provided contains a mixture of English and non-English words, making it difficult to identify and delete only the useless words. If you could provide a revised version of the text with only English words, I'll be happy to assist you further.