Fornax fxs 630 semi automatic hydraulic horizontal double mitre bandsaw

Fornax fxs 630 semi automatic hydraulic horizontal double mitre bandsaw

FORNAX FXS 630 D5A METALWORKING bandsaw Semi-automatic hydraulic heavy duty horizontal double mitre bandsaw with hydraulic lift, hydraulic vice operation and automatic cutting cycle. Massive steel rigid and torsion free saw frame providing maximum clearance at acute angles. Secure 10-volt 24v AC swivelling control console can be positioned in front or at side of machine during operation and in any position stays clear from path of saw frame. Low working height and simple Simple and reliable blade tensioning controls all within system with pre-set micro-switch easy reach of the ensures machine will not run until operator. correct tension achieved and provides automatic shut-down in the event of blade breakage. Front and rear vice bedways for optimum Simple to read robust measure-off mitre Conventional longitudinal support scale for angular setting of saw frame compact electrics up to 60 right and left with quick gives superior left and using recognised right hand movement setting lock-on/lock-off clamping. standard off-the-shelf components. positioning. Precision, blade guidance Powered fixed axis Saturn M42 with pre-set carbide pads blade cleaning and roller bearings. bi-metal saw chip brush. blade. Easy swivelling and setting of saw frame enables mitre cutting both right and left up to 60 while material remains clamped in vice at 90 Removable vice bed surface plates fitted in 2 halves can be replaced individually and economically after prolonged cutting use. Ergonomic bolt-on side splash-trays allows operator closer access to the saw. Powerful hydraulic vice with generous 635mm throat and extra high reinforced heavy duty vice jaws. Fixed position rear guide arm is set in lateral plane to provide maximum angle cutting capacity. Heavy plate steel fully welded angular base design with integral cross-members provides the foundation for stability and vibration-free cutting.