Frömag cnce 70 electromachinical keyseating and profiling machine

FROMAG Electromechanical Keyseating and Profiling Machines Keyseating Keyseating is a chip removal production process. The modular built PC has two main units, consisting Keys and grooves are produced in bores of different of the control panel with a 15" flat touch screen and components, it is also possible to produce profiles the control system fitted inside the electrical cabinet. and contours. The machine panel can be adjusted on the control The cutting tool is a single-edged cutter. It is ground arm or on the mobile control unit for different opera- to the form size of the keyway. Each keyway or tors into the ergonomic correct position. profile is cut in multiple strokes with equal infeed rates during the vertical down movement of the cutter Compared to hydraulic keyseaters, the FROMAG bar. The relative low tooling cost makes keyseating a electromechanical keyseating and profiling machines very suitable process for machining single compo- offer many advantages: nents or for workpieces with long bores compared to Precise CNC path controlled movements of the their size. stroke, infeed and indexing tables Servo drives with integrated absolute transmitters FROMAG electromechanically driven keyseating for all axis and profiling machines of the Rapida CNCE-APC High accurate and stiff machine movements by using ball or planetary ball screws models are equipped with high dynamic servo drives with integrated encoders and absolute Improved tool life and surface finish of the ma- chined components due to the rigidity of the transmitters for the movements of all axis. Due to this drive system equipment, the reference run is eliminated for the Stiff, heavy-duty maintenance-free slide ways in start-up of the machine or after tooling and work- all axis piece changes. Savings on hydraulic oil and associated main- tenance, oil changing, storage and disposal cost The electromechanical drive motors used in FRO- Reduced heat generation compared to hydraulics MAG machines fulfill the requirements demanded by Reduced noise level compared to hydraulic drives the industry for a modern machine tool, high accuracy and quality, short machining and set Reduced fault liability due to integrated encoders into the drives instead of linear measuring systems up times, energy savings, environmental concerns and operator friendliness. Savings of energy cost due to the obvious better efficiency of the servo drives compared to hydraulics The use of FROMAG electromechanically driven machines compared to hydraulic keyseaters being on the market offers a very cost-effective solution for a wide variety of applications. The Machines FROMAG Machining unit RAPIDA CNCE 70-750-APC with automatic clamping bridge Maschinenfabrik FROMAG The Machines economic

environmentally friendly energy savings improved tool life reliable highly dynamic

Features and dimensions OPIDA CNCE/APC

subject to change without notice - Keyway length mm for machines with stroke Bore size according to DIN Cutting and Return Keyway length foundation depth Speed Connected load kW Infeed rate/stroke Holding Capacity kN Machine Dimensions FD 1500 1495 When using indexing tables TA 680 and larger sizes, machine table dimensions will change. All dimensions in mm. The technical principle KEYSEATING Feed bar Cutter holder Cutter Tool post Centering device Workpiece The technical principle Upcutting with guided tool Workpiece Upcutting tool Tool holder Tool post Feed bar Workpiece samples Messrs. FROMAG is your reliable partner for: Subcontracting Electromechanical Keyseating and Profiling Machines Electromechanical Slotting Machines Electromechanical Broaching Machines Special Purpose Machines Precision, Product reliability, Efficiency There are more than FROMAG machines worldwide much valued due to their precision and reliability. They offer cost-saving solutions for the jobs defined by our customers, especially in the fields of: drive systems motors, gears and gearboxes, couplings pumps, fittings, actuators manufacturing systems materials handling and wind energy automotive and components special purpose machines Messrs. FROMAG is certified according to DIN EN ISO 9001 Please contact us, we will find a perfect solution for your requirements. FROMA