Fulltontech horizontal lathe conventional

Fulltontech horizontal lathe convertional  CF61100A   CF61125A   CF61140A   CF61160A
Max. Swing diameter over bed: 1000mm   1250mm   1400mm   1600mm
Max. swing diameter over carriage: 630mm   880mm   1050mm   1250mm
Max. Weight of workpiece between two centers: 6-8 ton
Width of guideways on bed: 755mm
Distance between centers: 1000 to 16000mm
Spindle bore diameter: 100mm
Taper of spindle nose: 1:20
Spindle speed steps: Forward 12, Reverse 12
Range of spindle speeds: 6-272 rpm / 4.25-192 rpm
Range of metric threads: 46 kinds, 1-224mm
Range of Whit worth threads: 46 kinds, 28-1 t.p.i
Range of module threads: 37 kinds, 0.25-56mm
Steady rest: Diameter of fixed steady rest Φ50—Φ470mm
Section of tool shank: 45x45mm
Max. Traverse of top slide: 350mm
Rapid moving speed of tool post: Longitudinal 3.8m/min, Cross 1.9m/min
Diameter of center sleeve: 140mm
Traverse of center sleeve: 300mm
Tailstock taper (Morse): Morse No.6
Main motor power: 22Kw

CF61125M   CF61140M   CF61160M   CF61180M
Swing diameter over bed: 1250 mm   1400 mm   1600 mm   1800 mm
Swing diameter over toolpost: 880 mm   1050 mm   1250 mm   1450 mm
Max. Weight of workpieces: 10-12 ton
Max. Length of workpieces: 1500 to 18000 mm (Tailstock sleeve extend out 250mm)
Width of machine bed: 970 mm
Spindle speed: 4.25-192 rpm, total 12 steps
Section of tool shank: 45x45 mm
Spindle diameter: 200 mm (front)
Taper hole of spindle: 1:20
Diameter of spindle hole: 100 mm
Stroke of top toolpost: 300 mm
Longitudinal rapid travel speed: 3800 mm/min
Cross rapid moving speed: 1900 mm/min
Feed species of toolpost: 48
Feed range of toolpost: Longitudinal 0.057-12.726 mm/rev, Cross 0.027-6.096 mm/rev
Diameter of tailstock sleeve: Φ200 mm
Taper hole of tailstock center: Morse No.6
Stroke of tailstock sleeve: 250 mm
Species number of threads: Metric 46 (Range 1-224), Tooth/inch BSP 46 (Range 28-1), Module 37 (Range 0.25-56)
Main motor parameters: 22 kW 380V 50HZ 970 rpm
Total power of the machine: 24.85 KW
Standard steady rest: Optional Ф200-550 mm or Ф500-850 mm

CF61125H   CF61140H   CF61160H   CF61180H   CF61200H
Swing Dia. over bed: 1250mm   1400mm   1600mm   1800mm   2000mm
Swing Dia. over toolpost: 880mm   1050mm   1250mm   1450mm   1650mm
Max. Weight of workpieces: 18-20 ton
Max. Length of workpieces: 5000-18000mm (Sleeve of tailstock extend 250mm)
Width of the machine bed: 1100mm
Speed of spindle: 3-136 rpm, 12 steps
Section of tool shank: 45X45mm
Spindle diameter: 240mm (front)
Spindle nose: A2-15 (for CF61125H), A2-15/A2-20 (for CF61140H), A2-20 (for CF61160H, CF61180H, CF61200H)
Spindle taper: Metric 140
Diameter of spindle hole: 100mm
Traverse of top tool post: 300mm
Traverse of cross slide: 650mm (for CF61125H), 750mm (for CF61140H), 850mm (for CF61160H), 950mm (for CF61180H), 1050mm (for CF61200H)
Longitudinal rapid moving speed: 3800mm/min
Cross rapid moving speed: 1900mm/min
The number of feed for toolpost: 48
Feed range of toolpost: Longitudinal: 0.057-12.726mm/rev, Cross: 0.027-6.096mm/rev
Diameter of tailstock sleeve: 240mm (Self-rotating spindle centers are equipped inside)
Taper hole of tailstock center: 80; 1:7
Tailstock traverse: 250mm
Main motor power: 30kw, 380V 50Hz, 1470 rpm