Gelber-bieger basic bending machine

Gelber-bieger basic bending machine 

All information about our bending machines. Mobi-bender Basic Horizontal press XS Horizontal press XL Hand-operated bender HB XS Angle bender HB XXS Press brake AB Mandrel-bender Hand-operated bender Do you have questions on bending machines? Just call us.

Mobi-bender Handy at high capacity. Probably the smallest bender in the world. The novel hydraulic bender is exceptionally light and Bavarian national award small and, therefore, also mobile. 2004 The company Gelber-Bieger in Losheim developed a hydraulic horizontal bending-press with a weight of only 80 kilograms, which shall replace the angle bender. The Mobi-Bender is easily transportable, for example, to construction sites, as it is only 80 cm long and 25 cm wide and high. Despite its handy dimensions, the horizontal press pushes ten tons. This corresponds to a bending capacity of 100 x 15 millimeters for construction steel. The simple adjustable stop allows bending exactness in the range of 0.1 mm. The hydraulic unit is always built up separately and is connected to the press with 2 quick-release fasteners. Bending pressure: 10 Tons What makes the Mobi-bender so special is that, long-lasting varied mode of bending capabilities, for sensitive responsibilities it presses with the stamp into the matrix. This is not usual for small machines. To bend a closed part, the positions of the stamp and matrix can be exchanged. As needed, it is also possible to bend around a bending mandrel. With the mandrel, a rectangle of 50 mm side length can be bent. Bending with punch into die Bending matrix into punch Narrow bending around the bending mandrel Connection for hydraulic aggregate Operating forwards and backwards Backstop for exactness of position 2 GELBER-BIEGER Accessories for Mobi-bender Multi V die 80 mm Die 100 mm Bending mandrel Punch 90 Distance piece

Dimensions: Weight kg: 80 Motor power kW: 1.5 Bending pressure t: 10 Tool height mm: 100 Bending capacity mm: Flat steel: 100 x 15 with V125 Round material with rotary plate mm: 16 Mobi-bender 100 Basic composed of: hydraulic aggregate, punch 90, Multi V die, length stop, supporting plate, oil filling HLP 46, operating manual/CE-Conformity Special accessories set 1 for creasing composed of bending mandrel, 1 x distance piece rotary plate Notching Flanging or tube Hydraulic aggregate Bavarian national award 2004 GELBER-BIEGER 3