Gelber-bieger vario 1,2,3 vario bender

Gelber-Bender Vario-Bender FLEXIBLE BASIC EQUIPMENT Profile benders are part of the basic equipment of every metal-working company. However, these machines are large, inflexible, and expensive for generations. With the bender Vario, the company Gelber-Bender revolutionized this machine type in all these aspects. The bender Vario perfectly adapts to the needs of the different metal trades and is universally applicable depending on the equipment, small, and above all inexpensive. This machine, which also can be used on construction sides, is the ideal basis for smaller entrepreneurs but also larger companies. Previous profile benders known to us could not be changed by the customer afterward. There was no possibility to upgrade them. If the existing machine was equipped with only two driven shafts, while three shafts were necessary for spiral bending, they could not be modified accordingly. This is changing now: the different versions of the Vario bender allow high flexibility because it can be exactly adapted to the highly stable despite lightweight construction needs of the customer. Vario 23 hydraulic feed and 3 motorized rollers Spiral bending device Polyamide bending rollers Steel bending rollers Vario 12 Manual feed with 2 motorized shafts On demand Vario 13 Manual feed with 3 motorized shafts On demand Vario 2= Hydraulic feed with 2 motorized shafts On demand Vario 2 Hydraulic feed with 3 motorized shafts On demand A spiral bending device is available for all models On demand Bending capacity for tube diameters of up to 48 mm Integrated hydraulic unit Adjustable guide 16 GELBER-BENDER For many companies, the use of a simple profile bender is not profitable despite the low entry-level price because it only bends tubes or profiles and is often underutilized. Also for this problem, the company Gelber-Bender offers an optimal extension of the applications. Because the Vario bender allows converting the profile bender into a press for the bending of flat iron and round material. For the Vario bender-3, it is only necessary to make a few simple adjustments and to loosen the screws in order to remove the profile bending unit and to mount an edging tool. With a bending capacity for flat iron with a thickness of up to 15 mm and a height of up to 100 mm, this machine is an enormous help during bending procedures in the metal industry. Apart from the reconstruction for the edging, the Vario bender offers the possibility to use all tools constructed by Gelber-Bender for the Mobi-bender as usual: the rotating plate as well as devices for cutting, notching, flaring... Vario 3 hydraulic bender with 10 tons Standard tool Bending with punch adapter Special tool rotary plate Manual control / one-way valve Bending with Multi V Copper bending GELBER-BENDER 17