Gom 3R-3 Thread rolling

Gom 3 R3 Thread rolling

3R-9:
Frequency control: standard
Roll separating force: 10-90 kN
Feed of the slide: 0-6mm/s
Speed range(rpm): 50-142
Tool diameter: 40-80mm
Roll spindle: 22mm
Dei mounting leght max.: 40mm
Workpiece diameter: 8-40mm
Max. lead on theread on pipe: 1.75mm
Max. lead on theread shaft: 1mm
Swivel angle: 8*
Cylinder stroke: 0-20mm
Main motor: 5,5kW
Connected load: 8,8kW
Weight: 1200 kg

3R-21
Frequency control: standard
Roll separating force: 10-210 kN
Feed of the slide: 0-6mm/s
Speed range(rpm): 25-65
Tool diameter: 110-175
Roll spindle: 54mm
Dei mounting leght max.: 40mm
Workpiece diameter: 20-90mm
Max. lead on theread on pipe: 5mm
Max. lead on theread shaft: 2mm
Swivel angle: 8*
Cylinder stroke: 0-20mm
Main motor: 15kW
Connected load: 19,3kW
Weight: 2500 kg

3R-45
Frequency control: standard
Roll separating force: 10-450 kN
Feed of the slide: 0-6mm/s
Speed range(rpm): 30-93
Tool diameter: 150-220mm
Roll spindle: 69,85mm
Dei mounting leght max.: 125mm
Workpiece diameter: 30-210mm
Max. lead on theread on pipe: 7mm
Max. lead on theread shaft: 3,5mm
Swivel angle: 12*
Cylinder stroke: 0-20mm
Main motor: 22kW
Connected load: 29,8kW
Weight: 6300 kg

3R-60
Frequency control: standard
Roll separating force: 10-600 kN
Feed of the slide: 0-6mm/s
Speed range(rpm): 30-93
Tool diameter: 165-220
Roll spindle: 80mm
Dei mounting leght max.: 125mm
Workpiece diameter: 30-210mm
Max. lead on theread on pipe: 10mm
Max. lead on theread shaft: 4mm
Swivel angle: 12*
Cylinder stroke: 0-20mm
Main motor: 30kW
Connected load: 37,8kW
Weight: 6500 kg

BYT-902
Max. workpiece lengt: 450mm
Min. workpiece lengt: 130 mm 
Max. workpiece diameter: 45 mm
Min. workpiece diameter: 15
Max. milling tool diameter: 63
Center milling tool diameter: 2,5-8mm
Tool holder conic: 40 Nr.
Main Moter: 2X3kW
Hydraulic motor: 0,75kW
Machine size: 150x87x190 cm