Goodway sw swiss turning center

Goodway SW SERIES SWISS Turning Centers Max. machining diameter mm, both sub and main spindle have same machining abilities. Compound bush design, bush or bushless mode can be selected according to different machining. Workpiece is clamped by hydraulic cylinder which provides sufficient clamping strength and quick Complete tooling system enables front, cross, and back cutting and milling in one process: Sub-spindle can be equipped with independent U-Drill device, providing deep hole drilling occupying any tool station. 1 Sub-spindle as optional Front-end / Rear-end 5 max. Backworking Tooling system tool Rear-end 4 total Live tool The upper 3 positions are a fixed unit for cross milling and drilling, the bottom 2 positions can be increased up t front-end x5 and rear-end x2 live tools. O Standard Cross live tool Expansion Front-end Live tool Cross live tool Expansion Front-end Live tool Cross live tool Rear-end Live tool For SW-20 / SW-32 only Sub-spindle applied 2 U-Drill devices which can offer deep hole drilling requirement but additional tool position is not needed. With high-pressure coolant system, it can ensure the best deep hole drill performance. Tool diameter Tool length: 150 mm High-pressure coolant system: 140 Bar Material: SUS303 5W-20, 5W-32, 5W-42 Max. machining diameter Bush Working range Max. turning length per chuck Bushless Rear-end max. length for front ejection mm Main spindle rpm Max. speed Sub-spindle Number of tools Cross live tools Rear-end tools Shank size tool Specifications are subject to change without notice.