Hedelius c 80/2300 milling machine 1

Hedelius c 80/2300 milling machine 

HEDELIUS offers a comprehensive range of optional accessories for efficient manufacture. These include hand tools for fast setups, measurement probes for tool or workpiece measurement, NC circular tables for four-sided machining or angled milling heads for face machining. The side openings in the casing can be exchanged to permit the machining of long workpieces. In combination with the angle chip conveyor, sections can be passed right through the machine workspace.

C 80/2300
X-Achse [X-Axis]: 2340 mm
Y-Achse [Y-Axis]: 800 mm
Z-Achse [Z-Axis]: 600 mm

HEDELIUS offers a comprehensive range of optional accessories for efficient manufacture. These include hand tools for fast setups, measurement probes for tool or workpiece measurement, NC circular tables for four-sided machining or angled milling heads for face machining. The side openings in the casing can be exchanged to permit the machining of long workpieces. In combination with the angle chip conveyor, sections can be passed right through the machine workspace.

C 80/2300
X-Achse [X-Axis]
Y-Achse [Y-Axis]
Z-Achse [Z-Axis]
2340 mm
800 mm
600 mm

TECHNISCHE DATEN [TECHNICAL DATA] C 80 C 80 CELOX C 80 CECOX
ARBEITSBEREICH [WORKING RANGE]
X-Achse [X-Axis] 2340 mm 2340 mm 2340 mm
Y-Achse [Y-Axis] 800 mm 800 mm 800 mm
Z-Achse [Z-Axis] 600 mm 600 mm 600 mm
Spindelabstand [Spindle distance] 140-740 mm 120-720 mm 120-720 mm
Optional (P-Version) 325-925 mm 305-905 mm 305-905 mm
Pendelbetrieb [Shuttle operation] 2X945X800 mm 2X945X800 mm 2X945x800 mm
ARBEITSTISCHE [WORKTABLES]
Aufspannfläche [Clamping area] 2900X750 mm 2900x750 mm 2900X750 mm
T-Nuten [T-slots] 18 mm/5 St. 18 mm/5 St. 18 mm/5 St.
Richtnut mittig [Locating slot centre] 18H8 18H8 18H8
Abstand der T-Nuten [Distance between T-slots] 125 mm 125 mm 125 mm
Tischbelastung [Table load] ca. [approx.] 2800 kg ca. [approx.] 2800 kg ca. [approx.] 2800 kg
HAUPTSPINDEL [MAIN SPINDLE]
Drehzahlbereich [Speed range] 30-8000 min-1 [rpm] 50-12000 min-1 [rpm] 50-14000/18000 min-1 [rpm]
Werkzeugaufnahme [Tool holder] D1N 69871-A40* D1N 69871-A40 HSK A63
Einzugskraft [Drawbar force] 12 KN 12 KN 25 KN
Anzugsbolzen [Pull studs] D1N 69872-A40 D1N 69872-A40 -
ANTRIEBSLEISTUNG [DRIVE PERFORMANCE]
Leistung [Power output] max. 27,0 kW
Drehmoment [Torque] max. 244 Nm
29,0 kW
183 Nm
35,0 kW
142 Nm
Fräsen [Milling] 650 cm3/min 550 cm3/min 450 cm3/min
Bohren [Drilling] Ø 50 mm Ø 45 mm Ø 40 mm
Gewinden [Thread cutting] M 30 M 27 M 24
VORSCHÜBE [FEED RATES]
Stufenlos [Infinitely variable] X, Y, Z 40/40/40 m/min 40/40/40 m/min 40/40/40 m/min
Vorschubkraft [Power feed] X, Y, Z max. 8000 N 8000 N 8000 N
Optional Optional
WERKZEUGMAGAZIN [TOOL MAGAZINE]
Kapazität [Capacity] Standard/Magnum 30/56 St. 30/56 St. 30/56 St.
Werkzeugdurchmesser [Tool diameter] max. 80/100** mm 80/100** mm 80 mm
Werkzeuglänge [Tool length] max. 330 mm 330 mm 330 mm
Span-zu-Span-Zeit [Cut-to-cut-time] ca. [approx.] 7,5-12,0 sec. ca. [approx.] 7,5-12,0 sec. ca. [approx.] 7,5-12,0 sec.
GENAUIGKEIT (VDI/DGQ 3441) [ACCURACY (VDI/DGQ 3441)] X, Y, Z
Positionstoleranz [Positioning tolerance] Tp=0,01/1000 mm Tp=0,01/1000 mm Tp=0,01/1000 mm
ELEKTRO-/NETZANSCHLUSS [POWER SUPPLY]
Betriebsspannung [Operating voltage] 3x400/230 V
Netzanschluss [Main power connection] 3x63 A
GEWICHTE [WEIGHT]
Maschine [Machine] Standard/Magnum ca. [approx.] 13000/13500 kg ca. [approx.] 13000/13500 kg ca. [approx.] 13000/13500 kg