Heller f/c series machining center

HELLER F series 5-axis machining centres

Positioning range: Longitudinal stroke X-axis: 800, 1,000, 1,000 Vertical stroke Y-axis: 800, 900, 1,000, 1,000 Transverse stroke Z-axis: 1,045, 1,300, 1,300

Feed forces: X- and Y-axis at 53 40 N: 10,000, 15,000, 15,000 Z-axis at 53 40 N: 15,000, 15,000, 15,000

Speed: Rapid traverse in X, Y, and Z-axis: 65, 65, 65

Acceleration: In X-, Y-, and Z-axis: 6, 4, 4

Path measurement system: Direct, absolute linear measuring scales with the highest resolution in X-, Y-, and Z-axis. Positioning tolerance Tp according to VDI/DGQm 3m441

Machining unit: Tool shank size: 40/63, 50/100, 50/100

Speed: Cutting universal speed range rpm: 5-16,000, 5-12,500, 5-12,500

Drive power/torque max.: 56/40 kW/Nm: 40/80, 80/1350, 80/350

Spindle diameter in front bearing: 70, 100, 100

Cutting universal speed range rpm: 5-10,000, 5-8,000, 5-8,000

Drive power/torque max.: 56/40 kW/Nm: 44/242, 60/1,146, 60/1,146

Spindle diameter in front bearing: 80, 100, 100

Cutting Tilt speed range rpm: 5-16,000, 5-12,500, 5-12,500

Drive power/torque max.: 56/40 kW/Nm: 40/80, 80/350, 80/350

Spindle diameter in front bearing: 70, 100, 100

Cutting Tilt speed range rpm: 5-10,000, 5-6,000, 5-6,000

Drive power/torque max.: 56/40 kW/Nm: 46/116, 43/822, 43/822

Spindle diameter in front bearing: 70, 100, 100

Tool management: Max. permissible tool mass kg: 12, 25, 35, 25, 35

Min. chip-to-chip time according to VDI 28524і s

Chain-type magazine: Magazine places number: 54/80/160/240, 50/100/150, 50/100/150

Max. tool length mm: 450, 600, 800, 600, 8001

Max. tool diameter mm: 160, 280, 280

Rack-type magazine: Magazine places number: 409, 191/265/324/425, 191/265/324/425

Max. tool length with H5K mm: 450, 600/1,000, 60011,000

Max. tool diameter mm: 188, 280/400, 280/400

NC rotary table: Rotary table indexing: 360,000 x 360,000 x 360,000 x

Speed RLT rpm: 20, 25, 25

Rotary milling torque RLT 53 40 Nm: 800, 1,150, 1,150

Indexing accuracy Tp acc. to VDI/DGQ 3441 angular s: 10, 10, 10

Workpiece management: Pallet table dimensions mm: 500 x 630, 630 x 630, 01,000

Max. workpiece diameter mm: 900, 1,000, 1,580

Max. workpiece width mm: 1,020, 1,580, 1,580

Max. workpiece height mm: 1,000, 1,200, 1,200

Max. load on a pallet table kg: 1,400, 1,400, 1,400

Pallet change time s: 13, 13, -

Coolant treatment: Chip conveyor, basic design

VRF variant, container capacity 1tr: 1,800, 1,800, 1,800

VRF variant, container capacity 1tr: 1,200, 1,200, 1,200

High-pressure internal coolant supply 1KZ PBF, VRK Bar: 50, 70, -, 50, 70, _, 50, 70

Media supply: Overall operating power of the machine approx. kVA: 31, 37, -, 57, 37, -, 573

Overall operating power of the coolant unit approx. kVA: 12, 13, 13

Power supply V/Hz: 3 x 400/50, 3 x 400/50, 3 x 400/50

Compressed air Bar: 5-6, 5-6, 5-6

Control Siemens SINUMERIK 840 D s1 x x x

Availability 5K, BT, H5K-A depending on machining unit and magazine type

Duty cycle 10 minutes

Values apply only with Siemens control and tool holding fixture HSK/tı for the next tool with a tool weight of up to 3 kg HSK5 6 03n 1/ y1 w2 ikthg s Hw5ivKe l1 h0e0a d uniбts Depending oп machíne contguration

RLT: Rotary tableDD: Direct Drive 1KS: Internal coolant suppPlyBF:. Paper band filteOr Optional values

F/C series; Technical data

C series 5-axis milling/turning machining centers Positioning range Longitudinal stroke X-axis mm Vertical stroke Y-axis mm Transverse stroke Z-axis mm Feed forces X- and Y-axis at N Z-axis at N Speed Rapid traverse in X, Y, and Z-axis. m/min Acceleration in X-, Y-, and Z-axis m/s² Path measurement system Direct absolute linear measuring scales with highest resolution in mm X-, Y-, and Z-axis. Positioning tolerance Tp according to VDI/DGQ 3441 Machining unit Tool holding fixture HSK-T 63 Speed Cutting universal speed range rpm Drive power/torque max. kW/Nm Spindle diameter in front bearing mm Power Cutting universal speed range rpm Drive power/torque max. kW/Nm Spindle diameter in front bearing mm Speed Cutting Tilt speed range rpm Drive power/torque max. kW/Nm Spindle diameter in front bearing mm Power Cutting Tilt Speed range rpm Drive power/torque max. kW/Nm Spindle diameter in front bearing mm Tool management Max. permissible tool mass kg Min. chip-to-chip time according to VDI s Chain-type magazine Magazine places Number Max. tool length mm Max. tool diameter mm Rack-type magazine Magazine places Number Max. tool length with HSK mm Max. tool diameter mm NC rotary table Rotary table indexing  speed DDT rpm Rotary milling torque DDT S1 Nm Indexing accuracy Tp according to VDI/DGQ angular s Workpiece management Pallet/table dimensions mm Max. workpiece diameter mm Max. workpiece width mm Max. workpiece height mm on a pallet/table kg Pallet change time s Coolant treatment Chip conveyor, basic design VRF variant, container capacity ltr VRF variant, container capacity ltr High-pressure internal coolant supply 1KZ PBF, VRK Bar Media supply Overall operating power of the machine approx. kVA Overall operating power of the coolant unit approx. kVA Power supply V/Hz Compressed air Bar Control Siemens SINUMERIK 840 D s1 x x x

1 With tilt units 2 Duty cycle 10 minutes3 Values apply only with Siemens control and tool holding fixture HSK/T1 1 for the next tool with tool weight of up to 3 kg HSK 63 / 12 kg HSK 100 4 With universal units5 Speed-limited 6 Depending on machine configuration DDT: Direct Drive Turning1KZ: Internal coolant supplyPBF: Paper band filterVRF: Vacuum rotation filterOptional values 0 F/C series: Technical data F/C series Dimensions, footprints Assembly dimensions approx 1 See drawing for exact measurements Footprints with standard chain magazines F/C series: Technical data Workpiece management Work area 1 Workpiece height mm Workpiece Collision path mm Width B/Diameter D/Depth T mm Pallet/table dimensions mm Pallet change time s loading With tilt units 2 Observe restriction with tool measurement option, for exact dimensions see General layout F/C series: Technical data F/C series: Technical data 0 spindle power, torque Tool holding fixture 40/63 SCU/SCT 63 SCU/CT 63 with spindle lock C machine Spindle power, kW 15 30 Spindle torque, Nm 15 30 Spindle torque, Nm Spindle speed rpm Spindle speed rpm Power 56 40 Power 56 40 Torque 56 40 Torque 56 40 II f/C series: Technical data Tool holding fixture 50/100 Spindle, Nm 5pindle power kW 5pindle torque Nm Spindle speed rpm Spindle speed rpm Power 56 40 Power 56 40 Torque 56 40 Torque 56 40 PCU 100 PCT 100 Spindle power, kW 20 100 Spindle torque, Nm Spindle speed rpm Spindle speed rpm Power 56 40 /n i=1/i=4 Power 56 40 i=1/ =4 Torque 56 40 i=1/i=4 Torque 56 40 i=1/i=4 5D Switching speed rpm 5D ... Switching speed rpm F/C series: Technical data