Hemsaw top bandsaw

Hem saw top  bandsaw AUTOMATIC SAW AUTOMATIC BAR STOCK TABLE MANUAL SAW WITH POWERED ROLLER TABLES POWERED ROLLERS DISCHARGE TABLE STOCK TABLE

MATERIAL STOP MATERIAL STOP Material Top With Power Lift Up The Rip Mower Back Then Raised MANUAL SAW WITH IDLE ROLLER TABLES STOCK

AUTOMATIC BAR FEED STATIONARY VISE JAWS TOP VIEW MOVEABLE VISE JAWS ROLLERS SIDE VIEW ROLLERS SUPPORT VISE SUPPORTING MATERIAL STRUCTURE SURROUNDS FRONT VIEW MATERIAL. SUPPORT MATERIAL MOVES ON ROLLERS. ROLLERS ROLLER CENTER DISTANCE IN AREA SHUTTLE MOVES IN.

Table Construction Characteristics

H.E M Saws have always been engineered with the notion that they should be simple to operate and easy to maintain. Our factory service people are available for saw installations, operator training, recommended annual preventive maintenance inspections, as well as necessary equipment repairs. At H.E M Saw our goal is to sell you a second or third bandsaw as your company Our saws are grows. We know to do this, you must be built with American satisfied with the performance and service of made, readily available your first H.E M Saw. We dedicate all our components. efforts toward reaching that goal. Repair or replacement parts are easy for our customers to find. We sell them as well as local manufacturer's parts distributors all over the country.

More features for more productivity in the tough, demanding jobs Drive Mechanism Material Positioning Control Power Blade Tension The variable The H.E M Saw jogging control is When a new blade is installed and the speed drive option that allows you to slowly inch slack has been removed by a simple permits the material forward until it is in the manual adjustment, the selection of desired position for cutting. power blade tension auto- the optimum matically sets the blade to blade speed the proper tension and maintains it until a new blade is for maximum needed. cutting rates and lowest blade cost. Totally enclosed worm gear drive provides trouble-free service. Coolant Tank Stacking Fixtures Totally built-in coolant system with high pressure pump and chip separation Guide Arms and Coolant As an option, stacking fixtures chamber to settle out chips on the Series Channels allow you to clamp II saws. H Series saws come with non- material from the top chamber tank. Coolant travels through channels in the as well as from the guide arms and blade life is extended sides. This lets you and more accurate cuts are achieved. cut bundled material with greater accuracy. Shuttle Vise Assembly Controls Blade Enhancers /opt The TRIPLE LINK DESIGN in this The control panel is located on a The shuttle vise system prevents any angular swivel rotating base at the end of the enhancer rotation of the shuttle vise. This ensures saw. The swing-away control allows causes a see- positive indexing for absolutely straight the operator to position the control panel sawing of the and parallel feeding of material through at any angle to maintain an excellent band saw blade on the saw base for accurate cutting. view of the material loading and cutting the material that is operations. being cut. This is exactly the way one rocks a wood saw from side to side to reduce the area exposed to the teeth of the saw blade, so the blade will penetrate more easily. The control panel operates all the func- Power Brush Assembly Hold Down Roller tions of the saw from this one location. The controls are well defined, operator The blade cleaning brush is power The Hold Down Roller prevents friendly and easy to use. Any changes driven for thorough cleaning of the blade. material from riding up during in cutting pressure, blade speed, etc. are This prevents chips from re-entering single row multiple easily changed during the cutting cycle. the work and piece cutting. Swing-away control standard on Series II causing crooked saw, option on H Series saws. cuts. Chip Auger Auger removes chips from cutting area Guide Cap Camlocks Digital Readout no auxiliary chip tank. Coolant separates The addition of camlocks on your saw Length can be easily changed from the from chips and returns to tank for will make changing a blade faster and front of the machine at the operator loca- recirculation. easier, eliminate the chance of tion on Series II saws; H Series saws an operator over tightening the digital readout is located guide caps, and also prevent the on the feed table. guide cap from working loose.