HM za sheet deburring machine

HM za sheet deburring machine 
HM Sheet Deburring Machine model ZA 250 is a machine designed for efficient, quick, and safe deburring. Large quality and safety requirements demand deburring of materials for further processing. The machine provides perfect deburring using two flap wheels, each mounted on its own electric motor. The two motors rotate in opposite directions and can be started individually, meaning you can deburr either one side or both sides simultaneously. Additionally, the top part of the machine can be opened, allowing for polishing on the built-in grinding system.

Efficient deburring of sheet or plate up to 10 mm thickness of materials such as: steel, aluminum, stainless steel, copper, brass, etc.

The Sheet Deburring Machine comes with flap wheels grain 60 and floor column. The machine is CE-approved and has a low noise level at the operator's workstation. The machine is prepared for mounting of extraction.

HM Sheet Deburring Machine model ZA 250 has a unique design, which ensures effective, safe, and clean edge deburring of most ferrous and nonferrous materials utilizing two abrasive flap wheels. The motors rotate in opposite directions, and being independent of each other, can either deburr one or both edges at the same time. In addition, the top cover of the machine can be opened to grind or finish flat surfaces.

Efficient deburring of sheet or plate up to 10 mm thickness, in most metals, including: mild steel, aluminum, stainless steel, copper, and brass can be accommodated. The machine is manufactured in accordance with the EC-machine directive, and it has a low noise level at the place of operation.

The ZA 250 Sheet Deburrer comes complete with two 60Grit flap wheels and a base. A separately powered dust extractor with a special mounting plate can be supplied as optional equipment.

HM Tube Deburring Machine model ZP 45 ensures quick and efficient removal of burrs from metal tubes or box section. With its two-speed motor, the ZP 45 ensures perfect deburring every time. The machine is provided with supports for both round and square tubes.

HM Tube Deburring Machine model ZP 45 can remove burrs from both the inside and outside of tubes in one operation, thereby reducing deburring work-time significantly. The rotary wire brush is mounted directly onto a two-speed motor. The ZP 45 ensures perfect deburring every time of both ferrous and non-ferrous metals.

The machine is provided with supports for both round and square tubes, and an adjustable eye shield. The machine comes complete with a 0.5mm wire wheel and base. The machine is manufactured in accordance with the EC-machine directive, and a separately powered dust extractor with a special mounting plate can be supplied as optional equipment.

HM Geared Head Drilling Machines models SBM 25B and SBM 25F are produced with more than 40 years' experience. They are competitively priced, have a movable head and table, are prepared for a coolant system, have a powerful motor, three spoke handle, chuck guard with micro switch, and a separate emergency stop.