Huron kx series 5axis machining center

Huron Five Series 5 axes high-performance machining centres Performance Technology Power Accuracy K 3 X 8 FIVE KX Five, a range of very high-performance machines for the machining of complex parts in 5 axes and on 5 sides. The HURON KX Five 5-axis high-speed milling High performance both in roughing range enables the machining of all complex and finishing. parts such as injection molds, aeronautical parts 5-axis machining for workpieces or parts of precision mechanics, on 5-sided and with weight up to 500 kg The modular design and the alternatives and equipments offered make it easy to meet all customer Very high accuracy in contouring requirements. and profiles These machines have all the qualities required to be at the highest level. The combination of dynamics and precision makes it possible to obtain a very high quality of surfacing. K3X 8 FIVE structure Structure: rigidity and Linear axes

Pre-stressed ball screws with accuracy expansion compensation system

Fixed portal structure in ribbed cast iron - Preloaded drive bearings to eliminate with stiffeners to reduce the torsional reverse clearance and axial forces on forces, weighed base ball screws for high surfacing quality

Cast iron with a high mechanical - Automatic lubrication of ball screws performance which maximizes structure and bearings to reduce the pollution of rigidity and allows optimum harmonic the cutting fluid stability and maximum damping during demanding cutting conditions

Machine secured on foundation with Tilting and rotating table weight equally distributed over fixing points enabling extreme rigidity and a very high - Table equipped with torque motors geometrical stability - Table on an inclined plane

The modular design and the alternatives - Tilting angle to avoid chips and equipments offered make it easy to accumulation on the table meet all customer requirements. - Possibility to work continuously from

Electrical cabinet protected 1P54 the vertical to the horizontal position

Combined axial and radial pre- stressed bearing

High rotation and high acceleration Environment - Ergonomics

No backlash

Evacuation channels for chips equipped - No wear with washing device - Rigidity: high clamping torque

Evacuation of chips by coolant liquid enabling high power during roughing

The automatic tool changer is placed outside the working area and is protected from the machining area. The tools can be Numerical controller loaded simultaneously at the machining.

Full safeguard ensuring safety of the - Ergonomics design machine, the operator and its environment - High memory and calculation

Very large accessibility to the table and the capacities workpiece from top and side of the - Interactive programming machine thanks to a large opening of - Graphic simulation before machining doors on the corner and possibility to load for optimal safety with lifting equipment

Operator panel Maintenance

Very good accessibility to all maintenance points Spindle rpm Spindle alternatives

Electrospindle combining speed, torque, and power for a high chip removal rate Ta HSK 63-A

Possibility of finishing operations thanks Rotating speed 16 000 m to the high rotational speed Power Ø/S1 36 / 22 kW

Axial/radial stiffness of the tool Torque S61S1 98 l 60 Nm guaranteed Characteristic speed гpm Equipments:

Air wall for spindle protection

Control sensor for angular positioning of the spindle

Cooling device

Mechanical clamping

Tool release with hydraulic control

Air/oil greasing of bearings

Taper HSK 50-E Rotating speed гpm Power S6/S1 32 / 24 kW Torque S6/S1 20.5 / 15.5 Nm Characteristic speed гpm

Taper HSK 63-A 32 kW 30 kW / 24 kW Rotating speed гpm / 21 kW / 16 kW Power S6/S1 25 / 20 kW Torque S6/S1 40/32 Nm Characteristic speed гpm

Taper HSK 40-E Rotating speed гpm Power S6/S1 12110 kW

Vibrations monitoring Vibration monitoring ensures safe operation of the machine components, tool, and workpiece. The system consists of a vibration sensor and an electronic signal processing unit.

Tools changers Automatic load/unload of the tool is made in vertical position. Number of housings Taper HSK 63-A Tool changing time tool/tool- chip/chip Alternatives with taper HSK 63-A Number of housings Tool changing time tool/tool- chip/chip Standard tables Characteristics Structure: Table on inclined plane Table dimension Admissible weight Max. workpiece dimension Height A axis: Tilting Rotating speed Measuring increment Torque: working/clamping C axis: Rotating table Rotating speed Measuring increment Torque: working/clamping Holes Workpiece clamping Reference Central bore Reducing the feedrates and accelerations Optional tables Characteristics Structure: Table on inclined plane Table dimension Admissible load Workpiece clamping Reference Central bore Interferences layouts: standard tables Interferences layouts: optional tables Optional palletized table for K3X 8 Five The palletized table is positioned instead of the horizontal standard table on a plane. It is equipped with a milling pallet. The measurement on the rotary axes is carried out by incremental encoder on axis A and absolute encoder on axis C. The resolution is 0.001. Characteristics Structure: table on inclined line Dimension pallet Admissible weight Max. workpiece dimension Height A axis: Tilting Rotating speed Incremental measurement Torque: working/clamping C axis: Table rotating Rotating speed Incremental measurement Torque: working/clamping Workpiece clamping holes Palletizing optional for K3X 8 Five To increase your productivity, to optimize your processes or increase your rates, HURON offers a 2-stations palletizing device for the K3X 8 Five. This device includes:

2-stations palletizing device

palletizing table

milling pallets

automatic opening of the door Other palletizing configurations are possible and have already been carried out by our customers. You can also customize your own palletizing system. The preparation of the table with rotating pneumatic seal will allow the machine to subsequently receive the solution of your choice. Testimony We work a lot in the aeronautics sector. To satisfy the demand and the level of quality demanded by our customers, we needed a dynamic, accurate and reliable production tool. We chose a Huron K3X 8 Five milling center and the quality we get when we machine the parts meets our needs perfectly. The versatility and modularity that we have on this machine, which is equipped with a 12-stations pallet device and a tool changer with 190 housings, allows us to increase and optimize our production as much as possible. In addition, we have chosen to trust this historically renowned manufacturer who continues to manufacture its products in France.

Proximity is reassuring. With the courtesy of Philippe Keim BAZELLE MECA - France - bazelle-mecanique-precisí HURON numerical controller cycles This cycle provides automatic tool checking during 1t takes care of optimizing the roughing machining or at tool change. 1f critical wear or a broken operation by automatically modulating and tool is detected, the system automatically triggers the adapting the feedrate, in real time, to the replacement of the tool at the most appropriate time. that results in peak material removal. therefore safeguards the integrity of the workpiece and MAIN FEATURES the cutting tools and optimizes tool use. The profitability Full use of available spindle power of the machine is increased by reducing downtime and tooling costs. Maximize material removal rate MAIN FEATURES Spindle and rotating axes overload Automated tool measurement, inspection and protection during roughing replacement done in the machining process No change to the NC program Implemented by HURON Configurable wear and breakage detection tolerance for each tool Automatic replacement of tools only with 3 axes machines, spindle in a vertical position PRECIFIVE oz 4au ta PRECIРROTECT Automate the calibration of the This cycle allows real-time monitoring of toolpaths and kinematics by carrying out the machine movements in order to anticipate any form of measurement of the position and the collision. The machine and the part are thus preserved. orientation of the rotation axes. MAIN FEATURES The calibration can be executed Consent machine accuracy directly in an NC program to ensure optimum accuracy during critical machining operations. Save money: No more repair or machine stop due MAIN FEATURES to a collision Quick, accurate, repeatable Increase profitability: preserve the integrity of the measuring system machine and workpiece; no more delivery delays to Optimized machining accuracy customers Compensation of the thermal Reliability: detection of an imminent collision expansion of the machine triggers an immediate and automatic stop of the Reduces rejected parts movements of the machine Rapid evaluation following a Peace of mind: let the machine work unsupervised machine collision Control report Technical characteristics X travel mm 780 900 Y travel mm 700 900 Z travel mm 500 500 Rapid feedrates m/min 50 50 Acceleration peг axis m/s2 5 5 Vectonal acceleration m/s2 9 9

Structure on a 55 page on a 45 page Table dimension Admissible load Distance spindle nose / top table Distance angle spindle / table Negativ angle -20 A axis - Tilting / -180 / -180 Rotating speed rpm 50 40 C axis - Rotation 360 continuous 360 continuous Rotating speed rpm 50 90 Rotating speed rpm 24,000 Taper HSK 63-A HSK 63-A Power - Torque S6/S1 Characteristic speed rpm Linear axes X1Y1Z Positioning P mm 0.004 Repeatability Ps medium mm 0.002 0.002 Rotating axes A, C Positioning P sec 7.2 7.2 Repeatability Ps medium sec 3.6 Nb of housings 24 30 Tool length mm 250 300 Tool mm 90 90 Tool weight / total weight in the magazine kg 7 8/120 Tool changing time sec 5-15 tool/chip Flow - Pressure 1/min - bar 30-3 Tank liters 230 Weight of the machine Length Width Height Optional equipments Tables alternatives - Spindles alternatives - Tools changers alternatives - High pressure coolant bar - Coolant by micro spraying - Air blast - Workpiece probe - Tool probe - Pallet device - Graphite dust removal system - Oil extraction system - Oil skimmer - Pressurization of measuring scales - Electrical cabinet conditioning - Sight glass

FRANCE GERMANY Huron Graffenstaden SAS Huron Frasmaschinen GmbH Route de Lyon Siemensstrasse Illkirch Graffenstaden Cedex Q commerci INDIA CANADA TURKEY Jyoti CNC Automation Ltd Huron Canada Huron Turkey  Istanbul Five Series / English / HURON