Huron mx series milling and turning center

Huron MX Series Milling and Turning centre Performance Technology Power -- Accuracy

Powerful, Rapid, Accurate Milling and Mill/Turn centre The MX multifunction machining centre is a high flexibility machine enabling machining operations in 5 axes and on 5 sides, in one setup part clamping, from roughing to finishing, as well as turning operations.

5 axis machining for workpiece up to

Hard material machining in a minimal time

Very high accuracy in contouring and profiles Complete automation of the machine Linear axes

Ballscrew with integrated system of compensation for expansion

Recirculating linear roller guide shoes ensuring minimum friction and efficient axis drive

Automatic grease lubrication of linear roller guides minimising the pollution of coolant

Absolute linear measurement by optical encoders in conformity with norm VD1/DGQ 3441 Head and Spindle

Head equipped with integrated torque motor

Head on a 45 plane allowing tilting from -45 up to

Spindle orientation: from vertical to horizontal, through all intermediate positions

Powerful spindle with high torque allowing high metal removal rate

Monitoring of the machining's vibrations to secure all the elements of the machine, the tool as well as the workpiece Rotating table

Table equipped with torque motor

High rate of rotational and acceleration

No backlash

No wear

Rigidity: high clamping torque enabling high power during roughing

2 versions: Milling and Mill/Turn Numerical control Structure: - Ergonomic design

Very high capacity of memory and calculation Rigidity and Accuracy - Interactive programming

Graphic simulation before machining for optimal safety - Structure with mobile column

Cast iron with a high mechanical performance which maximises structure Environment - Ergonomics rigidity and allows optimum harmonic - Chips evacuation channels with washing system and stability and maximum damping during spiral conveyors demanding cutting conditions

Tool magazine outside of working area - Machine secured on foundation with weight equally distributed over fixing points enabling extreme rigidity and a very high geometrical stability - Very large accessibility to the table and the workpiece

Modular design allows maximum flexibility in machine configuration to adapt to the technical requirements of the customer

Electrical cabinet fixed on the rear of the portal and protected IP54 Universal head A axis

Rotating speed 100 rpm 100 rpm Torque: working / clamping Nm Nm Measuring on axes Direct encoder Direct encoder Resolution 0.001 0.001

-450 Spindle axis / saddle plane 30 left Spindle axis / table plane 00 vertical -90 horizontal Standard spindle

Taper HSK 63A HSK 100A Rotating speed 100 rpm 100 rpm Power S6/S1 30 / 20 kW 50 / 32 kW Torque S6/S1 240/160 Nm 280 / 180 Nm Characteristic speed rpm 1,700 rpm Equipments: Air wall for spindle protection Control captor for angular positioning of the spindle Electrospindle cooling system Mechanical clamping with spring rings Tool release with hydraulic control Greasing of bearings MX 8 M: air/oil- Other models: grease Taper cleaning by compressed air Vibration monitoring Spindle alternatives with universal or fork head rpm 1 rpm When fork head, clearance of When fork head, clearance of 1 B axis is limited from -105 up to B axis is limited from -105 up to Taper Taper HSK 100A HSK 63A Rotating speed Rotating speed rpm Power S6/S1 86 / 70 kW Power S6/S1 38 / 28 kW Torque S6/S1 235/190 Nm Torque S6/S1 110/240 Nm Characteristic speed Characteristic speed 1,700 rpm Fork head Alternative Mechanical head / Alternative B axis clearance -110 / A axis clearance 45 / Resolution 0.001 Resolution 0.001 Tool changer:

Tool magazine is a chain type

Automatic load/unload of the tool is made in vertical position Pockets quantity 60 48 Taper HSK 63A HSK 100A Max. contiguous / non-contiguous 95 / 120 mm 125 / 180 mm Max. length 400 mm 400 mm Max. weight: tool/ in magazine 8 / 240 kg 15 / 360 kg Tool change time: tool/ chip / chip 6-12 sec 6-12 sec Alternatives: Tool changer

Tool magazine is a chain or multi-chain type ideally suited for mechanical head Housings quantity 120 96 48 96 Taper HSK 63A HSK 100A HSK 100A Max. tool contiguous / non 95 / 120 mm 125 / 180 mm 250 mm congruous Max. length 400 mm 400 mm 500 mm Max. tool weight 8 kg 15 kg Max. weight in magazine 480 kg 720 kg Tool change time: tool/ chip / chip 6 sec - 12 sec 6 sec - 12 sec 6 sec - 12 sec M version The table Table dimension  Max. machining volume  Admissible load kg -- Rotating speed 50 500 500 Torque: work / clamping Nm / l / Clamping system 7 slots 22H7 7 slots 22H7 8 radial slots 8 radial slots mm H12 - 100 mm 22H7 / H12 - 450 22H7 / H12 - 45 T slots H12-100mm Central boring  -- Table dimension mm . machining volume Admissible load kg Rotating speed  Torque: working / clamping Nm / l / Clamping system 7 slots 22H7 7 slots 22H7 8 radial slots 8 radial slots T slots mm H12 - 100 mm H12 -100 mm 22H7 / H12 - 45 22H7 / H12 - 45 Central boring 

Table dimension mm Max. machining volume Admissible load kg Rotating speed 50 50 250 250 Torque: working / clamping Nm / l / Clamping system 10 slots 22H7 10 slots 22H7 8 radial slots 8 radial slots η mm T slots 22H7 / H12 Central boring

With restriction on X travel L version mm Travels Y mm Z mm Table dimension Ø x mm Max. machining volume ØxFi x mm Admissible load kg Rotating speed 50 rpm Torque: work / clamping / Nm Clamping system 10 slots T slots 22H7/H12-125mm Central boring Interference diagrams with standard table Interference diagrams with palletized table Extension of the range - MX 16, MX 20 In order to allow our customers to machine extremely large parts, the MX range has been extended to include extra-large models, with MX 16 and MX 20. The larger workpiece clearance will be appreciated by some of our customers, particularly in the aeronautic and energy industries. Heads and spindles Offer identical to other machines in the range Tool changers Automatic loading/unloading of tools is made in vertical position Qty of housings Type Chain Chain Chain Chain Chain Taper HSK 100-A HSK 63-A HSK 100-A HSK 63-A HSK 100-A Max. tool Max. weight of tool Max. weight in magazine Tool change time: tool/tool- chip/chip The table - M version Table dimension mm Max. machining volume Admissible load kg 12,000 Distance between column mm Rotating speed S6 rpm 9 7 Torque: Work S6 / Clamping Nm T slots 8 T slots Clamping type Central boring MX 16 M- Head/table positioning 

Head/table positioning Automation For higher productivity, increase production speeds and optimize machining cycles, we offer a variety of palletizing configurations. The processes are independent, safe, and reliable.

Palletizer attached to the front of the machine

Optimal operator access to the machine

Constant visibility over the working area

safeguard for easy, ergonomic pallet loading/unloading from above and from the front of the machine Twin-pallet device for MX8 to MX12 Pallet device with up to 4 pallets for MX 16 and MX 20 Cycles CN HURON This cycle provides automatic tool checking during machining or at tool change. If critical wear or a broken tool is detected, the system automatically triggers the replacement of the tool at the most appropriate time. It safeguards the integrity of the workpiece and the cutting tools and optimizes tool use. Main Features: Automated tool measurement, inspection, and replacement done in the machining process Configurable wear and breakage detection tolerance for each tool Automatic replacement of tools Only with 3 axes machines, spindle in vertical position Automate the calibration of the kinematics by carrying out the measurement of the position and the orientation of the rotation axes. Main Features: Conserve machine accuracy Save time: no simulation required, control is done in real-time Save money: No more repair or machine stop due to a collision Increase profitability: preserve the integrity of the machine and workpiece; no more delivery delays to customers Reliability: detection of an imminent collision triggers an immediate and automatic stop of the movements of the machine Peace of mind: let the machine work unsupervised Technical characteristics: Travels mm Rapid feed rates ml/min Acceleration per axis m/s² Rotating speed Power - Torque S6/S1 kW - Nm Characteristic speed m Uncertainty: Linear axes: 7 - Rotating axes: 10 sec Repeatability: Ps medium Linear axes: 4 u - Rotating axes: 5 sec

Torque: Work / Clamping Rotating speed Taper: HSK 100A Power - Torque S6/S1 Characteristics Uncertainty: Linear axes - Rotating axes Qty of housings Tool dimension: mm Flow - Pressure 1/min - bar Tank liters Optional equipment Various spindles - Various tool changers - Pallet device - High-pressure coolant - Microspraying coolant - Air blast - Workpiece probe - Tool probe - Oil extraction device - Oil skimmer - Sight glass - Air conditioning of electrical cabinet - Pressurization of measuring scales Over-all measurements Width mm - 8 Length mm Height mm Weight of the machine kg Width mm Length mm Height mm Weight of the machine kg Coming soon FRANCE GERMANY Huron Graffenstaden SAS Huron Milling Machines GmbH Route de Lyon Siemensstrasse Gerlingen Huron Canada Huron Turkey Rue St-Charles Ouest Gayrettepe mah. Ayazma Dere Caddesi Pazar sok. Bareli Is merkezi Kat Gayrettepe / Istanbul MX Series English / HURON