Hyllus 292 bending and rolling machine

Hyllus 292 bending and rolling machine 

The machine is simple, sturdy, and rapid; easily operated. It's indispensable for tinsmiths. It's possible to obtain many decent jobs. The lift of the upper beam is made by moving two counterweighted levers completed with cams, whose maneuver is easy and comfortable. The locking pressure is adjustable according to the plate thickness. The bending beam is very well balanced by a counterweight, and its position can be read on two dials. The eventual bending beam and upper beam flexions due to material elasticity can be compensated. By the only clamping of the beam against the upper cylinder, the bending machine can be transformed into a rolling machine. The device for little tubes, supplied with the machine, is mounted on the levers of the bending beam clamped horizontally.

Standard equipment: blade, round blade 2 mm radius, reinforcement for the overturning table, device for little tubes 12 to 20 mm diameter, 15 mm width with two handles, cylinder 60 mm, cylinder 76 mm, handwheel, spanner, grease pump.

Extra equipment: round blades with different radii, sticks, telegraphic code, working length for place R, weight approx. 670 Kg, overall dimensions.

Device for little tubes.