Hyllus noris universal bending machine

Hyllus Universal bending machines - item telegraphic code NOMADE 1 NORENA 1 NORMA Machines produced with great precision and sturdiness, easily adjustable. The vertical movement is obtained by bevel gears and trapezoidal-thread screws, manually operated by means of a winch. A suitable stop ring permits to lock the bending beam in a wanted position. 1 Standard equipment: 1 sharp angle blade 45 1 round angle blade r. 2,5 mm 1 rear register 1 set of spanners 1 counterweight. On request a comb register is mounted. 1 telegraphic code NOMADEBIS NORENABIS NORMABIS Working length mm 1020 1020 1320 for plate R=40 Kg/mm2 mm 1,5 2 1,5 Universal bending approx. weight kg 275 405 500 machines - item 288 bis mounted on cast iron base Up to date and sturdy machines suitable for every bending operations. The vertical movement is obtained by bevel gears and trapezoidal-thread screws, manually operated by a hand wheel. The turnover of the bending beam is equilibrated by an adjustable counterweight to make the movement easy and light. A suitable stop ring permits to fix the wanted bending angle. The beam ends are provided with two cross cavities for edges already bent. The machines are mounted on sturdy cast iron base. Standard equipment: 1 45 angle blade 1 round blade r. 2,5 mm 1 rear register 1 set of spanners. On request, a comb register is mounted. 1 Bending machines mounted on without base cast iron base 1 item 289 item 289 bis telegraphic code PL1S PLUTO telegraphic code PL15815 PLUTOBIS Working length mm 1020 1320 working length mm 1020 1320 for plate R=40 Kg/mm2 mm 1,5 1 for plate R=40 Kg/mm2 mm 1,5 1 cap lift mm 100 100 cap lift mm 100 100 approx. weight Kg 235 300 approx. weight Kg Up to day and sturdy machines suitable for every bending operation s movement is obtained by bevel gears and trapezoidal-thread screws. The tù of the bending beam is equilibrated by an adjustable counterweight to make easy and light the movement. A suitable stop ring permits to fix the wanted bending angle. The beam ends are provided with two cross cavities for edges already bent. Worm screw reducer, special electric motor having high starting torque, multiple disk coupling - easily adjustable - so to obtain an adequate closing. On request, the machine can be equipped with electrical equipment with remote switches controlled by a pedal. Standard equipment: 1 45 angle blade-1 round blade r. 2,5 1 rear register spanners. On request, a comb register is mounted. Motorized bending machines telegraphic code PLISMOT PLUTOMOT working length mm 1020 1320 for plate R-40 Kg/mm2 mm 1,5 1 cap lift mm 100 100 motor power HP approx. weight Kg Universal bending machines - item 290 They present a sturdy construction: these machines are used for different bending operations, both for right angle and round corner. They are conveniently employed for iron furniture, valley forming, container construction, etc. All the more stressed components are suitably ribbed and reinforced. The shoulders are one-piece cast so that the machine is more steady and accurate. The bed is adjustable vertically by the same control flywheel. The head movement, that is held in wide ways, is very light thanks to a worm screw. The overturning traverse is very well balanced by a counterweight parallelogram system, and the bending angle can be fixed by a suitable stop ring. Standard accessories: 1 45-angle blade 1 movable register spanners grease pump. On request, the machine can be equipped with counterweight and parallelogram, graduated angular stop, automatic turnover of the table. telegraphic code NOVA NARVIC working length mm 1650 2050 for plate R=40 Kg/mm2 mm 3,5 2 cap lift mm 250 bed down and overturning traverse mm 100 100 approx. weight Kg 1850 2100 Universal bending machines - item 290 They present a sturdy construction: these machines are used for different bending jobs both for right angle and round corner: they are conveniently employed for iron furniture, valley forming, container construction, etc. All the more stressed components are suitably ribbed and reinforced. The shoulders are one-piece cast so that the machine is more steady and accurate. The bed is adjustable vertically by two screws operated contemporaneously by a lateral winch. The movement of the head, that is held in wide ways, is very light thanks to a worm screw reduction. The overturning traverse is very well balanced by two counterweights, and the bending angle can be fixed by two suitable stop rings. Standard accessories: 1 45-angle blade 1 movable register spanners grease pump. On request, the machine can be equipped with counterweight and parallelogram, graduated angular stop, automatic turnover of the table telegraphic code T1TAN ERCULES working length mm 2050 2550 for plate R=40 Kg/mm2 mm cap lift mm bed down and overturning traverse mm 100 90 approx. weight Kg