Hyundai skt 15/21 cnc turning center

Hyundai skt 15/21 cnc turning center 

SKT 15121 Series High Productivity, Versatile Integrated Lathe High Speed, High Accuracy High Rigidity, ensures Long Tool Life and Machining Accuracy Integrated Operation Easy Control Convenient Operation High Speed, High Accuracy, High Rigidity SKT15 Series SKT21 Series Main Spindle Speed 6,000 rpm 4,000 rpm Sub Spindle Speed 6,000 rpm [LS/LMS] 6,000 rpm [LS/LMS] Spindle Motor 11/15/11 kW 20/15 HP

The Best Productivity Popular CNC Lathe Tool Size SKT15 Series 25 x ø 32mm 1 x ø SKT21 Series 25 x ø 40mm 1 x ø Indexing Time 1 step full 6 step Rapid Traverse X/Z 1,417 ipm

CNC Turning Center SKT15/21 Series Reduce Non-Cutting Time with High-Speed Rapid Traverse Rigid and Reliable Servo Turret Index High-performance AC servo motor and high-accurate 3-pieces coupling construction. Powerful turret clamping force by hydraulic system. 3,390 kgf, 7,474 lb Wide Range of Constant Power The wide range of constant power enables the machine to do an excellent heavy-duty cutting at the low speed with high power and torque.

• SKT15 7.14 kgf-m
• SKT21

One Bed Cast Construction High-accuracy High-Rigidity At the saddle, Built-in Construction has been applied to X-axis to provide rigidity and accuracy.

Thermally Symmetrical Headstock Spindle is supported with angular contact ball bearings in the rear for high-accuracy and rigidity. Gearless Type Spindle Spindle has a wide range of generating power and is designed for the minimum thermal growth as a high-precision lathe. High precision can be obtained even during high-speed operation. Also, it has less noise and a good surface roughness because of the gearless type spindle. Pre-tension and Double Anchored Ballscrew Each Axis is designed with a large diameter ballscrew, fixed by double anchor on both ends, to provide high-rigidity and minimize thermal distortion. Direct Connection Servo Motors with Ballscrews By directly connecting ballscrews of every axis with servo motors, it makes possible to obtain high accuracy. One-piece built-in casting construction greatly improves rigidity and accuracy with high power and torque. CNC Turning Center SKT15/21 Series SUPER KIATURN 15 Quick spindle Acc./Dec. Time Accelerating and decelerating time of the main spindle is greatly reduced in comparison with other machines by high-performance of spindle motor. High Rigid and Excellent damping ability of Roller Guide

High-tolerance Excellent Cutting Capacity Cutting Condition ROUGH CUTTING FINISH CUTTING MATERIAL BRASS SPINDLE SPEED 2,300 rpm 2,700 rpm DEPTH OF CUT 1.5 mm 0.02 mm FEED 0.3 mm/rev 0.0008/rev COOLANT USE USE DIA. OF WORK ø 42 [2 PASSCUT] ø 36 [1 PASSCUT] TOOL DIAMOND

Hydraulic System Convenience SKT15121 Series can provide a variety of choices for factory automation C-Axis for Live Tool QJC Chuck Option The QJC chuck is not the conventional type chuck which is assembled by bolts and serrations. It only takes a minute to change precise three jaws of QJC chuck to another. This function is available for limited models LM, LMS Series. Big Bore for Bar Feeder SKT15: MAX ø 73 mm SKT21: MAX ø 65 mm

Bar Capacity mm ø 44 ø 65 Spindle Hole Size mm nø 51 ø 78 Hollow Chuck Size mmø п1 65 ø 210 Bar Feeder Chip Disposal Separated Coolant Tank Chips fall directly into the chip box. The separate type chip box can be easily cleaned. A large opening in the right side of the machine is provided for easy chip cleaning and discharge.

For coolant pumping For chip disposal and coolant return CNC Turning Center SKT15/21 Series SKT15 SKT21 Boring Bar Socket Tool Holder U-Drill Socket SKT15LS/21 LS Boring Bar Socket Boring Holder U-Drill Socket Tool Holder CNC Turning Center SKT15/21 Series SKT 15/15L SKT 21 SKT15/21 SKT15LS SKT21 LS SKT15LM SKT21 LM SKT 15LMS SKT 21 LMS 

Specification

Swing over bed Max. turn Ø in. max gain Chuck size Capacity sub mm in Swing over cross side mm in Max. turning length mm in Spindle bearing diameter Sub ASA No. of tools Tools dimensions mm Turret mechanism Mill tool speed X mm/mi RAPID Z рmin pm TRAVERSE B m/m п TRAVEL Z m Taper/D1A Tail levels mm n Stock thrust Travel type auto position Spindle N H k SUB Motor X kW HF Z kW HP B HP Electric power supply Weight μ φς Controller FANUC Oi-T [FANUC 21 ί-T] Specifications are subject to change for improvement without notice. Standard Option Hydraulic Hollow Chuck Spindle Load Meter Chip Conveyor Bar Feeder Interface Soft Jaw Light Yellow Tool Sockets NC Function Display on the CR A1R Blow Splash Guard Run Hour Display for Chuck Through Spindle Flood Coolant NC Function Display on the CR High-Pressure Coolant 6BAR Chuck Open-Close Foot Switch for Tailstock Confirmation Device Spindle Inner Stopper Auto Door

CNC Turning Center SKT15/21 Series Controlled Axes 2 X, Z axes. Max. 4 axes are available Max. 4 X, Z, B, and C axes Simultaneous Control 2 axes / Linear and circular. Max. 4M 4 X, Z, B, and C axes / Linear and Circ Least Input Increment X axis: mm Z axis: mm C axis: deg. Least Command Increment X axis: mm Z axis: mm C axis: deg Spindle Speed Command S5 digits, Binary Output Spindle Speed Override Spindle Orientation Maximum Programmable Dimensions +/- Interpolation Functions Cylindrical Interpolation Absolute and Incremental Command Constant Surface Speed Control Decimal Point Input Direct Drawing Dimension Programming Miscellaneous Function Canned Cycle Multiple Canned Cycle Multiple Canned Cycle Rigid Tap Program Stop Program End Programmable Data Input Manual Jog Feed Manual Handle Feed-rate Feed Command Feed-rate Override Jog Override Rapid Traverse Override Override Cancel Dwell Manual Continuous Feed Jog-Handle Same Mode Incremental Feed Manual Reference Point Return Automatic Reference Point Return Reference Point Return Check Second Reference Point Return Tool Offset Amount Tool Function Geometry/Wear Compensation Direct Input of Tool Offset Value Measured B Tool Offset Amount Tool Offset Pairs Tool Life Management Inch/Metric Conversion Polar Coordinate Interpolation Work-piece Coordinate System Tape Code Number of Register-able Program Part Program Storage Length Reader/Puncher Interface Buffer Register Custom Macro B Manual Absolute Block Skip Optional Block Skip Backlash Compensation Sequence Number Search Program Number Search Machine Lock Program Check Function Dry Run Spindle Stop Single Block Function Optional Chamfering/Corner R CRT/MD1 Memory Lock Language Stored Stroke Display of Spindle Speed and T code at all Screens Self-Diagnosis Function Emergency Stop Stored Pitch Error compensation Interlock Background Editing Run Hour/Parts count Display Actual Cutting Feed-rate Display Erase CRT Screen Display Program Restart Graphic Display Figures in inch are converted from metric values. Design and specifications subject to change without notice.

Contact Information:

Head Office 391-8 Kaumjung-Dáng, Changwon, Gyéongnam, Korea Website: