Ibarmia a-series drilling machine

IBARMIA The A Series, drills with automatic A Series, your choice for: feed by means of a mechanical Mechanical reliability. clutch, means entering the industrial Industrial use. Real capacity. Prepare the spindle turn from the Variety of sizes. work position. Select the desired Full equipment. speed and adjust it by means of the Long life. 2 levers and plate for this purpose Lasting value. placed on the front of the head. Drill with manual feed whenever you The fact that this Series is the oldest prefer, or let the machine work for in the present range of IBARMIA you. Activate the precise mechanical machines is not due to chance but to clutch by any of the spokes of the the fact that this machine is such a feed crank wheel or by the lever on safe investment, a classic machine the front of the machine head. which stands the test of time. Select the desired feed and check Machines for a full working life, even how the machine makes the tool in the most adverse working conditions. penetrate with firmness by reading Indestructible gears, robust off the millimetered scale displayed spindles, proportioned structures on the front of the machine head. Fix which guarantee great strength and the desired depth using the knurled stability.

Characteristics A-35 A-40 A-45 A-50 Maximum drilling capacity in steel St. 60 ø mm 35 40 45 50 Maximum drilling capacity in cast iron 200 Brinell ø mm 45 50 55 60 Maximum tapping capacity in steel St. 60 mm M 27 M 33 M 33 M 36 Maximum tapping capacity in cast iron 200 Brinell mm M 33 M 40 M 40 M 42 Morse Taper MT Nr.  Maximum spindle stroke drilling depth mm 200 200 200 230 Main motor power HP Kw 2 Coolant pump motor power HP Kw 0.10 Transmission Gear box: Number of speeds 9 Speed range with motor at 1500 rpm 50 Hz 3Ph. rpm  Upon request: Motor at 1800 rpm 60 Hz 3Ph Feed Automatic by mechanical clutch Automatic feed range mm/rev Worktable dimensions LxW mm Column diameter mm Distance from spindle centre to column face mm Net weight Kg Gross weight with packing 

Standard equipment Optional equipment Hardened and ground high quality Depth scale and adjustable MG1 Rotating table plate and tilting CN Pneumatic counterbalance for steel gears depth stop support spindle return speed plate and selecting levers on Automatic tool ejector RS Automatic feed reversing system for Union, dragging cone and assembly head front Built-in low voltage electrical tapping for multi-spindle heads Gear box lubrication by automatic equipment in machine head RPF Automatic tapping cycle by lead screw GM Multi-spindle head guide rod pump Emergency STOP system PM START/STOP/EMERGENCY control Machined base with coolant tank and spindle turn selection switch RPF-ANR RPF with 100 mm pneumatic extension pump Drill guard with microswitch rapid approach sc Column riser of 200 mm worklight CE mark HGP Master guide spindle and nut set Rotating table plate for RPF Automatic feed and cut-off by HB Hydro-pneumatic power feed unit mechanical clutch AR Feed range reduced to 50% of their Front hand wheel for fine feed work Not standard in every market standard values on display on pages 22-25 Please check with your dealer oLM Mechanical spotface device No extra price

ring mounted at the bottom of the Classic mania. precision threaded scale rod. Ten, nine, eight,..., two, one and zero and the spring acts upon the spindle set, returning it to its original position. Feel all the sensitivity of the engineering through the fine feed manual control wheel provided on the front of the drill head. Remove the tool from its housing come comfortably in a simple and smooth operation of its automatic ejector. The ample worktable, with its rotating plate with 3 T slots, allows you to work in comfort. For the same price the support can be tilting but remember that this reduces the rigidity of the worktable and that it is seldom used. The height adjustment is carried out by means of a rack and pinion system which can be blocked by a lever. Illuminate the worktable so that you work in a safer environment and protect yourself with the safety drill guard. Activate the coolant pump built into the base to cool the tool and obtain longer working life and higher performance. A housing in the side of the machine head harmoniously integrates the low voltage electrical equipment, in standard version models. Electrical equipment and automatic tool ejection system lever.