Ibarmia A/S/B column drills

Ibarmia A/B/S column drills

Specification:
- Maximum drill capacity in steel: 50/60 kg. Ø
- Maximum drill capacity in cast iron: Ø
- Morse Taper No:
- Maximum drilling depth
- Speed range with motor at 1450 rpm 50 Hz
- Feed range: mm/turn
- Power of main motor: HP
- Power of electric pump motor: HP
- Feed and automatic cut-out by mechanical clutch: _ 
- Feed and automatic cut-out by electromagnetic clutch: _ 
- Automatic tool ejector: _ 
- Built-in light
- Volume: m3
Upon request:
- Taper ISO No
- Fitting of tapping unit with master RPF: _ 
- Fitting of sensitive tapping unit RS
- Built-in light: _ 
- Possibility of reduced feeds AR: _ 
- Spotface arrangement DL: _ 
- Speed range with motor at 1000 rpm 50 Hz:
- Speed range with motor at 750 rpm 50 Hz:
- Speed range with motor at 1715 rpm 60 Hz:
- Speed range with motor at 1200 rpm 60 Hz:
- Speed range with motor at 900 rpm 60 Hz:

- Gears are hardened and ground, slipping over splined shafts. 
- The inside mechanisms are lubricated by a pump.
- Models "S" do not have feeds.
- All the electrical and mechanical controls are located on the front side of the machine, easily accessible.
- The automatic feed on models "A" is mechanical and is operated manually by a lever.
- The automatic feed on models "B" is electromagnetic and is operated by pressing any of the four levers.
- Models "B-60" and "B-70" have a fixed table (rotates around the column).