Ibarmia d-series drilling machine

IBARMIA  d-series drilling machine  The D of the D Series stands for all applications with an indexing table, fixed to the worktable, and in the center of 3 machine heads providing 4 simultaneous work areas, for example: loading/unloading, drilling, indexing table, fixed to the worktable, to perform the indexing table on a worktable with linear displacement same operation in long production batches. center of 2 machine heads providing 3 simultaneous work areas, for example: loading/unloading, drilling and tapping. Automatic drilling cycle ACNL synchronised with the turn of the indexing table. Electrical equipment cabinet of the machine. PMC suspended control panel. LDG digital read-out for positioning the linear moving table. Protection against chips and coolant with safety micro-switch. Parts clamping chuck. Hydraulic indexing table with a fixed range of divisions. Table with linear displacement to adjust the diameters of the flanges to the center of the machine spindle. Displacement crankshaft. selector of the number of divisions. Welded machine bed for housing the different elements. Position blocking lever. indexing table hydraulic group. D Series Divide to add. Bolt circle drilling Applications and dimensions. For drilling one by one in an automatic cycle the holes of flanges, crowns, valves in 1BARMIA we have arranged the following machine range: DP-70/800: for pieces with maximum outside Ø of 800 mm. DP-70/1400: for pieces with maximum outside of 1400 mm. DP-70/2000: for pieces with maximum outside of 2000 mm. We offer the possibility of equipping the machine according to the requirements and budget of each individual customer. Please refer to the dimension chart on page 25.