Ibarmia z-series drilling machine

IBARMIA Z Series drilling machine: Speed variable size, capacity Easy run, Low maintenance, Attractive price High quality, Thermomagnetic spindle, Emergency Speed variator, Mechanical Worklight, Coolant Pulleys in aluminum switch, reversing stop lever Feed, turning clutch switch, switch Cast iron switch, of conic pulleys Depth scale, adjustable depth stop Lever for lifting, Coolant hose, Automatic tool Drill guard, Solid feed, Speed, Worklight Solid toolholder, Machine, High-low The pulley cover, tap ejector, vertical control Triple variator lever, shaft model, speed Belt rapid adjustment, gripped, plate Serial number range System of opening, speed range, rectified surface adjustment Maximum drilling capacity in steel St. 60 ø Maximum drilling capacity in cast iron 200 Maximum tapping capacity in steel St. 60 mm Maximum tapping capacity in cast iron 200 Morse Taper MT Nr. 3 Maximum spindle stroke, drilling depth mm Main motor power HP Kw 1.20 / 1.80 0.9 / 1.3 Coolant pump motor power HP Kw 0.10 0.07 Transmission Belt drive Number of speeds 10, Continuous Speed range with motor at 750/1500 rpm 50 Hz Upon request: 145-220-290-345 80-1170 Motor at 900/1800 rpm 60 Hz Trí 440-540-690-860-1080-1720 Feed Manual, Automatic Nr. of automatic feeds - 2 Automatic feed range mm/rev - 0.1-0.2 Worktable dimensions LxW mm 400x420 Column diameter mm 125 Distance from spindle center to column face mm 300 Net weight Kg 260 290 Gross weight with packing Kg 310 340 Packing dimensions length x width x height m 2.3x0.6x1.1

Depth scale, adjustable depth stop, Machined base with coolant tank Rotating table plate, tilting support Automatic feed reversing system for tapping Automatic tool ejector and pump Reversible tiltable with vice Hydro-pneumatic power feed unit Thermomagnetic switch, worklight Coordinate table over support, Digital rpm counter Emergency STOP, Drill guard with microswitch Spindle reversing switch, CE mark High/low speed range selector Display on pages 36-41

AŁ-321b With reversible tiltable with vice With rotating table plate and tilting support

IBARMIA Z Series, your decision for Innovative design, Smooth, Silent Electronic speed variator, Digital rpm counter Automatic feed reversing for tapping Easy run, Low maintenance Thermomagnetic, Automatic feed Digital rpm, Emergency, Drill/tap cycle selector Mechanical clutch, Machine model Serial number plate Depth scale, Worklight switch Automatic tool, Adjustable depth ejector Coolant switch, Coolant hose, Worklight Drill guard, Solid feed, Turn stop Solid toolholder, Solid steel Maximum drilling capacity in steel St. 60 Maximum drilling capacity in cast iron 200 Maximum tapping capacity in steel St. 60 mm Maximum tapping capacity in cast iron 200 Morse Taper MT Nr. 4