Indumasch rounding and bending machine

Indumasch ROUNDING BENDING TECHNOLOGY A rounding and bending press - tailored for practical requirements. This machine is essentially a horizontal press. It is manufactured with close tolerances and achieves maximum reproducibility. Positioning accuracy is mm. The stroke can be easily programmed by a SIEMENS SPC control system. This is an open control system, allowing the programming of several machine functions. Depending on the particular application, the machine can be used for compression molding, folding, straightening, pipe bending, shaping, cutting, and so on.

Our know-how lies in the development of special tools for use on our rounding and bending presses. Decades of experience in collaboration with our customers enable us to take reliable and rapid account of their requirements.

Whether in the fabrication of machines with special tools for the aviation industry, making handles for furniture manufacture, production of copper welding tongs, specially shaped reinforcing steel for tunnel construction, clamping rings for pressure cookers, special straightening installations for profiles in vehicle manufacture an almost inexhaustible field of applications lies behind and also before us.

MINIBEND The small bending press with a pressure capacity of 20 tons and a stroke of 200 mm distinguishes itself through its compact design. The machine table is clearly designed and suitable for the assembly of standard or special tools.

Whether for folding with an optionally controlled side stop as a small folding press or as a drive element for special tools for specific forming / punching of all metals and non-metals.

TECHNICAL DATA: Power in kN 200 kN Standard tool height others on request 150 mm Stroke x-axis 200 mm Teach-in control SIEMENS OP7 Machine for bending/profiling Position of the working cylinder below the machine table of frames for industrial baking sheets. Machine dimensions L x W 690 x 520 mm customer: LEHMANN Working height 950 mm Machine weight 500 kg Hydraulic drive 3.0 kW Electric connection 400 V, 50 Hz

Machine for bending decorative strips for seating area AIRBUS A380. Customer: AIRBUS